SIST-TP CLC IEC/TR 62453-52-31:2019

Field device tool (FDT) interface specification - Part 52-31: Communication implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2 (IEC/TR 62453-52-31:2017)

This part of the IEC 62453-52-xy series, which is a Technical Report, provides information for integrating the PROFIBUS1 technology into the CLI-based implementation of FDT interface specification (IEC TR 62453-42).
This part of IEC 62453 specifies implementation of communication and other services based on IEC 62453-303-1.
This document neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-31: Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur - Kommunikationsprofilfamilie (CPF) 3/1 und 3/2 nach IEC 61784 (IEC/TR 62453-52-31:2017)

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-31: Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage - CP 3/1 et CP 3/2 de l’ IEC 61784 (IEC/TR 62453-52-31:2017)

Specifikacija vmesnika orodja procesne naprave - 52-31. del: Implementacija komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/1 in CP 3/2 (IEC/TR 62453-52-31:2017)

Ta del skupine standardov IEC 62453-52-xy je tehnično poročilo, ki podaja informacije za integracijo tehnologije PROFIBUS1 v implementacijo (na osnovi skupne jezikovne infrastrukture (CLI)) specifikacije vmesnika orodja procesne naprave (FDT) (IEC TR 62453-42).
Ta del standarda IEC 62453 določa implementacijo komunikacijskih in drugih storitev, ki temeljijo na standardu IEC 62453-303-1.
Ta dokument ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

• Status: Published
• Publication Date: 27-Mar-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Feb-2019
• Due Date: 28-Apr-2019
• Completion Date: 28-Mar-2019
• Ref Project: CLC IEC/TR 62453-52-31:2019 - Field device tool (FDT) interface specification - Part 52-31: Communication implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC IEC/TR 62453-52-31:2019
01-junij-2019
Specifikacija vmesnika orodja procesne naprave - 52-31. del: Implementacija
komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/1 in CP 3/2
(IEC/TR 62453-52-31:2017)
Field device tool (FDT) interface specification - Part 52-31: Communication
implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2
(IEC/TR 62453-52-31:2017)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-31:
Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur -
Kommunikationsprofilfamilie (CPF) 3/1 und 3/2 nach IEC 61784 (IEC/TR 62453-52-
31:2017)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-31:
Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage -
CP 3/1 et CP 3/2 de l’ IEC 61784 (IEC/TR 62453-52-31:2017)
Ta slovenski standard je istoveten z: CLC IEC/TR 62453-52-31:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CLC IEC/TR 62453-52-31:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019

---------------------- Page: 2 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019


TECHNICAL REPORT CLC IEC/TR 62453-52-31

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
February 2019
ICS 25.040.40; 35.100.05; 35.110

English Version
Field device tool (FDT) interface specification - Part 52-31:
Communication implementation for common language
infrastructure - IEC 61784 CP 3/1 and CP 3/2
(IEC/TR 62453-52-31:2017)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 52-31: Mise en œuvre d’un profil de 52-31: Kommunikationsimplementierung mit der
communication pour l’infrastructure commune de langage - allgemeinen Sprachinfrastruktur -
CP 3/1 et CP 3/2 de l’ IEC 61784 Kommunikationsprofilfamilie (CPF) 3/1 und 3/2 nach IEC
(IEC/TR 62453-52-31:2017) 61784
(IEC/TR 62453-52-31:2017)


This Technical Report was approved by CENELEC on 2019-01-14.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC IEC/TR 62453-52-31:2019 E

---------------------- Page: 3 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
CLC IEC/TR 62453-52-31:2019 (E)
European foreword
This document (CLC IEC/TR 62453-52-31:2019) consists of the text of IEC/TR 62453-52-31:2017
prepared by SC 65E "Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process
measurement, control and automation".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC/TR 62453-52-31:2017 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
CLC IEC/TR 62453-52-31:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61131-3 2003 Programmable controllers -- Part 3: - -
Programming languages
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61158-6-3 2014 Industrial communication networks - EN 61158-6-3 2014
Fieldbus specifications - Part 6-3:
Application layer protocol specification -
Type 3 elements
IEC 61784-1 2014 Industrial communication networks - EN 61784-1 2014
Profiles - Part 1: Fieldbus profiles
IEC 62453-1 2016 Field device tool (FDT) interface EN 62453-1 2017
specification - Part 1: Overview and
guidance
IEC 62453-2 2016 Field device tool (FDT) interface EN 62453-2 2017
specification - Part 2: Concepts and
detailed description
IEC TR 62453-42 2016 Field device tool (FDT) interface - -
specification – Part 42: Object model
integration profile – Common language
infrastructure
IEC 62453-303-1 2009 Field device tool (FDT) interface EN 62453-303-1 2009
specification - Part 303-1: Communication
profile integration - IEC 61784 CP 3/1 and
CP 3/2



3

---------------------- Page: 5 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019

---------------------- Page: 6 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019




IEC TR 62453-52-31

®


Edition 1.0 2017-06




TECHNICAL



REPORT








colour

inside










Field device tool (FDT) interface specification –

Part 52-31: Communication implementation for common language

infrastructure – IEC 61784 CP 3/1 and CP 3/2


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-4335-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
– 2 – IEC TR 62453-52-31:2017 © IEC 2017
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Terms and definitions. 10
3.2 Symbols and abbreviated terms . 10
3.3 Conventions . 10
3.3.1 Datatype names and references to datatypes . 10
3.3.2 Vocabulary for requirements . 10
3.3.3 Use of UML . 10
4 Bus category . 10
5 Access to instance and device data . 11
5.1 General . 11
5.2 IO signals provided by DTM . 11
5.3 Data interfaces . 11
5.3.1 General . 11
5.3.2 Mapping of PROFIBUS datatypes to FDT datatypes . 11
5.3.3 SemanticInfo . 12
6 Protocol specific behaviour . 14
6.1 PROFIBUS device model . 14
6.2 Configuration and parameterization of PROFIBUS devices . 15
6.2.1 General . 15
6.2.2 Monolithic DTM for a modular PROFIBUS device . 16
6.2.3 Composite DTM for a modular PROFIBUS device . 16
6.3 Support for DP-V0 configuration . 17
6.4 PROFIBUS slaves operating without a class 1 PROFIBUS master . 17
6.5 PROFIBUS-related information of a slave DTM . 17
6.5.1 General . 17
6.5.2 PROFIBUS Network Data (PND) . 18
6.5.3 GSD Information . 25
6.5.4 Process Data Items . 26
7 Protocol specific usage of general datatypes . 26
7.1 General datatypes . 26
7.2 Protocol specific handling of the datatype STRING . 27
8 Network management datatypes . 27
8.1 General . 27
8.2 Configuration . 28
8.3 Process Data Items . 28
8.4 Parameterization . 28
9 Communication datatypes. 29
9.1 General . 29
9.2 ProfibusAbortMessage . 29
9.3 DP-V0 Communication . 29
9.3.1 General . 29
9.3.2 Dpv0ConnectRequest . 30

---------------------- Page: 8 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
IEC TR 62453-52-31:2017 © IEC 2017 – 3 –
9.3.3 Dpv0ConnectResponse . 31
9.3.4 Dpv0DisconnectRequest . 32
9.3.5 Dpv0DisconnectResponse . 32
9.3.6 Dpv0TransactionRequest . 33
9.3.7 Dpv0TransactionResponse . 37
9.4 DP-V1 Communication . 42
9.4.1 Dpv1ConnectRequest . 42
9.4.2 Dpv1ConnectResponse . 43
9.4.3 Dpv1DisconnectRequest . 45
9.4.4 Dpv1DisconnectResponse . 45
9.4.5 Dpv1TransactionRequest . 46
9.4.6 Dpv1TransactionResponse . 47
9.5 Error information provided by Communication Channel . 49
10 Datatypes for process data information . 49
10.1 General . 49
10.2 ProfibusIOSignalInfo . 49
11 Device identification . 50
11.1 General . 50
11.2 ProfibusDeviceScanInfo datatype. 51
11.2.1 General . 51
11.2.2 Datatypes derived from ProfibusBaseScanInfo . 52
11.3 ProfibusDeviceIdentInfo datatype . 54
11.3.1 General . 54
11.3.2 Datatypes derived from ProfibusBaseIdentInfo . 55
11.4 Mapping of Information Source . 57
Bibliography . 63

Figure 1 – Part 52-31 of the IEC 62453 series . 8
Figure 2 – FDT PROFIBUS Device Model . 15
Figure 3 – ProfibusNetworkData . 27
Figure 4 – ProfibusAbortMessage . 29
Figure 5 – Dpv0ConnectRequest . 31
Figure 6 – Dpv0ConnectResponse . 31
Figure 7 – Dpv0DisconnectRequest . 32
Figure 8 – Dpv0DisconnectResponse . 32
Figure 9 – Dpv0ReadConfigurationDataRequest . 33
Figure 10 – Dpv0ReadDiagnosisDataRequest . 34
Figure 11 – Dpv0ReadInputDataRequest . 34
Figure 12 – Dpv0ReadOutputDataRequest . 35
Figure 13 – Dpv0ReadUserParameterRequest . 36
Figure 14 – Dpv0WriteOutputDataRequest. 36
Figure 15 – Dpv0WriteUserParameterRequest . 37
Figure 16 – Dpv0ReadConfigurationDataResponse. 38
Figure 17 – Dpv0ReadDiagnosisDataResponse . 39
Figure 18 – Dpv0ReadInputDataResponse . 39
Figure 19 – Dpv0ReadOutputDataResponse . 40

---------------------- Page: 9 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
– 4 – IEC TR 62453-52-31:2017 © IEC 2017
Figure 20 – Dpv0ReadUserParameterResponse . 41
Figure 21 – Dpv0WriteOutputDataResponse . 41
Figure 22 – Dpv0WriteUserParameterResponse . 42
Figure 23 – Dpv1ConnectRequest . 43
Figure 24 – Dpv1ConnectResponse . 44
Figure 25 – Dpv1DisconnectRequest . 45
Figure 26 – Dpv1DisconnectResponse . 45
Figure 27 – Dpv1ReadRequest . 46
Figure 28 – Dpv1WriteRequest . 47
Figure 29 – Dpv1ReadResponse. 48
Figure 30 – Dpv1WriteResponse . 48
Figure 31 – ProfibusIOSignalInfo . 50
Figure 32 – ProfibusDeviceScanInfo . 51
Figure 33 – Datatypes derived from ProfibusBaseScanInfo . 52
Figure 34 – ProfibusDeviceIdentInfo . 54
Figure 35 – Datatypes derived from ProfibusBaseIdentInfo . 55

Table 1 – Mapping of datatypes . 11
Table 2 – Usage of general datatypes . 12
Table 3 – PROFIBUS Network Information . 19
Table 4 – Protocol specific usage of general datatypes . 27
Table 5 – ProfibusAbortMessage datatype . 29
Table 6 – Availability of services for Master Class 1 (C1) . 30
Table 7 – Availability of services for Master Class 2 (C2) . 30
Table 8 – Dpv0ConnectRequest datatype . 31
Table 9 – Dpv0ConnectResponse datatype . 32
Table 10 – Dpv0DisconnectRequest datatype . 32
Table 11 – Dpv0DisconnectResponse datatype . 33
Table 12 – Dpv0ReadConfigurationDataRequest datatype . 33
Table 13 – Dpv0ReadDiagnosisDataRequest datatype . 34
Table 14 – Dpv0ReadInputDataRequest datatype . 35
Table 15 – Dpv0ReadOutputDataRequest datatype . 35
Table 16 – Dpv0ReadUserParameterRequest datatype . 36
Table 17 – Dpv0WriteOutputDataRequest datatype . 37
Table 18 – Dpv0WriteUserParameterRequest datatype . 37
Table 19 – Dpv0ReadConfigurationDataResponse datatype . 38
Table 20 – Dpv0ReadDiagnosisDataResponse datatype . 39
Table 21 – Dpv0ReadInputDataResponse datatype . 40
Table 22 – Dpv0ReadOutputDataResponse datatype . 40
Table 23 – Dpv0ReadUserParameterResponse datatype . 41
Table 24 – Dpv0WriteOutputDataResponse datatype . 42
Table 25 – Dpv0WriteUserParameterResponse datatype . 42
Table 26 – Dpv1ConnectRequest datatype . 43

---------------------- Page: 10 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
IEC TR 62453-52-31:2017 © IEC 2017 – 5 –
Table 27 – Dpv1ConnectResponse datatype . 44
Table 28 – Dpv1DisconnectRequest datatype . 45
Table 29 – Dpv1DisconnectResponse datatype . 45
Table 30 – Dpv1ReadRequest datatype . 46
Table 31 – Dpv1WriteRequest datatype . 47
Table 32 – Dpv1ReadResponse datatype . 48
Table 33 – Dpv1WriteResponse datatype . 49
Table 34 – ProfibusIOSignalInfo datatype . 50
Table 35 – ProfibusDeviceScanInfo datatype . 52
Table 36 – Datatypes derived from ProfibusBaseScanInfo . 53
Table 37 – ProfibusDeviceIdentInfo datatype . 55
Table 38 – Datatypes derived from ProfibusBaseIdentInfo . 56
Table 39 – Profile specific mapping of identity information . 58

---------------------- Page: 11 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
– 6 – IEC TR 62453-52-31:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-31: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/1 and CP 3/2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62453-52-31, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technicall committee 65: Industrial-
process measurement, control and automation.
Each part of the IEC 62453-52-xy series is intended to be read in conjunction with its
corresponding part in the IEC 62453-3xy series. The corresponding part for this document is
IEC 62453-303-1.

---------------------- Page: 12 ----------------------
SIST-TP CLC IEC/TR 62453-52-31:2019
IEC TR 62453-52-31:2017 © IEC 2017 – 7 –
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/440/DTR 65E/514/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 62453 series, under the general title Field device tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside'
...

SLOVENSKI STANDARD
SIST-TP CLC IEC/TR 62453-52-31:2019
01-junij-2019
Specifikacija vmesnika orodja procesne naprave - 52-31. del: Implementacija
komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/1 in CP 3/2
(IEC/TR 62453-52-31:2017)
Field device tool (FDT) interface specification - Part 52-31: Communication
implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2
(IEC/TR 62453-52-31:2017)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-31:
Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur -
Kommunikationsprofilfamilie (CPF) 3/1 und 3/2 nach IEC 61784 (IEC/TR 62453-52-
31:2017)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-31:
Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage -
CP 3/1 et CP 3/2 de l’ IEC 61784 (IEC/TR 62453-52-31:2017)
Ta slovenski standard je istoveten z: CLC IEC/TR 62453-52-31:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CLC IEC/TR 62453-52-31:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL REPORT CLC IEC/TR 62453-52-31

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
February 2019
ICS 25.040.40; 35.100.05; 35.110

English Version
Field device tool (FDT) interface specification - Part 52-31:
Communication implementation for common language
infrastructure - IEC 61784 CP 3/1 and CP 3/2
(IEC/TR 62453-52-31:2017)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 52-31: Mise en œuvre d’un profil de 52-31: Kommunikationsimplementierung mit der
communication pour l’infrastructure commune de langage - allgemeinen Sprachinfrastruktur -
CP 3/1 et CP 3/2 de l’ IEC 61784 Kommunikationsprofilfamilie (CPF) 3/1 und 3/2 nach IEC
(IEC/TR 62453-52-31:2017) 61784
(IEC/TR 62453-52-31:2017)


This Technical Report was approved by CENELEC on 2019-01-14.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC IEC/TR 62453-52-31:2019 E

---------------------- Page: 2 ----------------------

CLC IEC/TR 62453-52-31:2019 (E)
European foreword
This document (CLC IEC/TR 62453-52-31:2019) consists of the text of IEC/TR 62453-52-31:2017
prepared by SC 65E "Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process
measurement, control and automation".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC/TR 62453-52-31:2017 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 3 ----------------------

CLC IEC/TR 62453-52-31:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61131-3 2003 Programmable controllers -- Part 3: - -
Programming languages
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61158-6-3 2014 Industrial communication networks - EN 61158-6-3 2014
Fieldbus specifications - Part 6-3:
Application layer protocol specification -
Type 3 elements
IEC 61784-1 2014 Industrial communication networks - EN 61784-1 2014
Profiles - Part 1: Fieldbus profiles
IEC 62453-1 2016 Field device tool (FDT) interface EN 62453-1 2017
specification - Part 1: Overview and
guidance
IEC 62453-2 2016 Field device tool (FDT) interface EN 62453-2 2017
specification - Part 2: Concepts and
detailed description
IEC TR 62453-42 2016 Field device tool (FDT) interface - -
specification – Part 42: Object model
integration profile – Common language
infrastructure
IEC 62453-303-1 2009 Field device tool (FDT) interface EN 62453-303-1 2009
specification - Part 303-1: Communication
profile integration - IEC 61784 CP 3/1 and
CP 3/2



3

---------------------- Page: 4 ----------------------

IEC TR 62453-52-31

®


Edition 1.0 2017-06




TECHNICAL



REPORT








colour

inside










Field device tool (FDT) interface specification –

Part 52-31: Communication implementation for common language

infrastructure – IEC 61784 CP 3/1 and CP 3/2


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-4335-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 ----------------------

– 2 – IEC TR 62453-52-31:2017 © IEC 2017
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Terms and definitions. 10
3.2 Symbols and abbreviated terms . 10
3.3 Conventions . 10
3.3.1 Datatype names and references to datatypes . 10
3.3.2 Vocabulary for requirements . 10
3.3.3 Use of UML . 10
4 Bus category . 10
5 Access to instance and device data . 11
5.1 General . 11
5.2 IO signals provided by DTM . 11
5.3 Data interfaces . 11
5.3.1 General . 11
5.3.2 Mapping of PROFIBUS datatypes to FDT datatypes . 11
5.3.3 SemanticInfo . 12
6 Protocol specific behaviour . 14
6.1 PROFIBUS device model . 14
6.2 Configuration and parameterization of PROFIBUS devices . 15
6.2.1 General . 15
6.2.2 Monolithic DTM for a modular PROFIBUS device . 16
6.2.3 Composite DTM for a modular PROFIBUS device . 16
6.3 Support for DP-V0 configuration . 17
6.4 PROFIBUS slaves operating without a class 1 PROFIBUS master . 17
6.5 PROFIBUS-related information of a slave DTM . 17
6.5.1 General . 17
6.5.2 PROFIBUS Network Data (PND) . 18
6.5.3 GSD Information . 25
6.5.4 Process Data Items . 26
7 Protocol specific usage of general datatypes . 26
7.1 General datatypes . 26
7.2 Protocol specific handling of the datatype STRING . 27
8 Network management datatypes . 27
8.1 General . 27
8.2 Configuration . 28
8.3 Process Data Items . 28
8.4 Parameterization . 28
9 Communication datatypes. 29
9.1 General . 29
9.2 ProfibusAbortMessage . 29
9.3 DP-V0 Communication . 29
9.3.1 General . 29
9.3.2 Dpv0ConnectRequest . 30

---------------------- Page: 6 ----------------------

IEC TR 62453-52-31:2017 © IEC 2017 – 3 –
9.3.3 Dpv0ConnectResponse . 31
9.3.4 Dpv0DisconnectRequest . 32
9.3.5 Dpv0DisconnectResponse . 32
9.3.6 Dpv0TransactionRequest . 33
9.3.7 Dpv0TransactionResponse . 37
9.4 DP-V1 Communication . 42
9.4.1 Dpv1ConnectRequest . 42
9.4.2 Dpv1ConnectResponse . 43
9.4.3 Dpv1DisconnectRequest . 45
9.4.4 Dpv1DisconnectResponse . 45
9.4.5 Dpv1TransactionRequest . 46
9.4.6 Dpv1TransactionResponse . 47
9.5 Error information provided by Communication Channel . 49
10 Datatypes for process data information . 49
10.1 General . 49
10.2 ProfibusIOSignalInfo . 49
11 Device identification . 50
11.1 General . 50
11.2 ProfibusDeviceScanInfo datatype. 51
11.2.1 General . 51
11.2.2 Datatypes derived from ProfibusBaseScanInfo . 52
11.3 ProfibusDeviceIdentInfo datatype . 54
11.3.1 General . 54
11.3.2 Datatypes derived from ProfibusBaseIdentInfo . 55
11.4 Mapping of Information Source . 57
Bibliography . 63

Figure 1 – Part 52-31 of the IEC 62453 series . 8
Figure 2 – FDT PROFIBUS Device Model . 15
Figure 3 – ProfibusNetworkData . 27
Figure 4 – ProfibusAbortMessage . 29
Figure 5 – Dpv0ConnectRequest . 31
Figure 6 – Dpv0ConnectResponse . 31
Figure 7 – Dpv0DisconnectRequest . 32
Figure 8 – Dpv0DisconnectResponse . 32
Figure 9 – Dpv0ReadConfigurationDataRequest . 33
Figure 10 – Dpv0ReadDiagnosisDataRequest . 34
Figure 11 – Dpv0ReadInputDataRequest . 34
Figure 12 – Dpv0ReadOutputDataRequest . 35
Figure 13 – Dpv0ReadUserParameterRequest . 36
Figure 14 – Dpv0WriteOutputDataRequest. 36
Figure 15 – Dpv0WriteUserParameterRequest . 37
Figure 16 – Dpv0ReadConfigurationDataResponse. 38
Figure 17 – Dpv0ReadDiagnosisDataResponse . 39
Figure 18 – Dpv0ReadInputDataResponse . 39
Figure 19 – Dpv0ReadOutputDataResponse . 40

---------------------- Page: 7 ----------------------

– 4 – IEC TR 62453-52-31:2017 © IEC 2017
Figure 20 – Dpv0ReadUserParameterResponse . 41
Figure 21 – Dpv0WriteOutputDataResponse . 41
Figure 22 – Dpv0WriteUserParameterResponse . 42
Figure 23 – Dpv1ConnectRequest . 43
Figure 24 – Dpv1ConnectResponse . 44
Figure 25 – Dpv1DisconnectRequest . 45
Figure 26 – Dpv1DisconnectResponse . 45
Figure 27 – Dpv1ReadRequest . 46
Figure 28 – Dpv1WriteRequest . 47
Figure 29 – Dpv1ReadResponse. 48
Figure 30 – Dpv1WriteResponse . 48
Figure 31 – ProfibusIOSignalInfo . 50
Figure 32 – ProfibusDeviceScanInfo . 51
Figure 33 – Datatypes derived from ProfibusBaseScanInfo . 52
Figure 34 – ProfibusDeviceIdentInfo . 54
Figure 35 – Datatypes derived from ProfibusBaseIdentInfo . 55

Table 1 – Mapping of datatypes . 11
Table 2 – Usage of general datatypes . 12
Table 3 – PROFIBUS Network Information . 19
Table 4 – Protocol specific usage of general datatypes . 27
Table 5 – ProfibusAbortMessage datatype . 29
Table 6 – Availability of services for Master Class 1 (C1) . 30
Table 7 – Availability of services for Master Class 2 (C2) . 30
Table 8 – Dpv0ConnectRequest datatype . 31
Table 9 – Dpv0ConnectResponse datatype . 32
Table 10 – Dpv0DisconnectRequest datatype . 32
Table 11 – Dpv0DisconnectResponse datatype . 33
Table 12 – Dpv0ReadConfigurationDataRequest datatype . 33
Table 13 – Dpv0ReadDiagnosisDataRequest datatype . 34
Table 14 – Dpv0ReadInputDataRequest datatype . 35
Table 15 – Dpv0ReadOutputDataRequest datatype . 35
Table 16 – Dpv0ReadUserParameterRequest datatype . 36
Table 17 – Dpv0WriteOutputDataRequest datatype . 37
Table 18 – Dpv0WriteUserParameterRequest datatype . 37
Table 19 – Dpv0ReadConfigurationDataResponse datatype . 38
Table 20 – Dpv0ReadDiagnosisDataResponse datatype . 39
Table 21 – Dpv0ReadInputDataResponse datatype . 40
Table 22 – Dpv0ReadOutputDataResponse datatype . 40
Table 23 – Dpv0ReadUserParameterResponse datatype . 41
Table 24 – Dpv0WriteOutputDataResponse datatype . 42
Table 25 – Dpv0WriteUserParameterResponse datatype . 42
Table 26 – Dpv1ConnectRequest datatype . 43

---------------------- Page: 8 ----------------------

IEC TR 62453-52-31:2017 © IEC 2017 – 5 –
Table 27 – Dpv1ConnectResponse datatype . 44
Table 28 – Dpv1DisconnectRequest datatype . 45
Table 29 – Dpv1DisconnectResponse datatype . 45
Table 30 – Dpv1ReadRequest datatype . 46
Table 31 – Dpv1WriteRequest datatype . 47
Table 32 – Dpv1ReadResponse datatype . 48
Table 33 – Dpv1WriteResponse datatype . 49
Table 34 – ProfibusIOSignalInfo datatype . 50
Table 35 – ProfibusDeviceScanInfo datatype . 52
Table 36 – Datatypes derived from ProfibusBaseScanInfo . 53
Table 37 – ProfibusDeviceIdentInfo datatype . 55
Table 38 – Datatypes derived from ProfibusBaseIdentInfo . 56
Table 39 – Profile specific mapping of identity information . 58

---------------------- Page: 9 ----------------------

– 6 – IEC TR 62453-52-31:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-31: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/1 and CP 3/2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62453-52-31, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technicall committee 65: Industrial-
process measurement, control and automation.
Each part of the IEC 62453-52-xy series is intended to be read in conjunction with its
corresponding part in the IEC 62453-3xy series. The corresponding part for this document is
IEC 62453-303-1.

---------------------- Page: 10 ----------------------

IEC TR 62453-52-31:2017 © IEC 2017 – 7 –
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/440/DTR 65E/514/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 62453 series, under the general title Field device tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 11 ----------------------

– 8 – IEC TR 62453-52-31:2017 © IEC 2017
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of Field Device Tool (FDT)
components for function control and data access within a client/server architecture. The
specification
...