SIST EN ISO 10893-3:2011/A1:2020

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 (ISO 10893-3:2011/Amd 1:2019)

This part of ISO 10893 specifies requirements for automated full peripheral magnetic flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection of imperfections. Unless otherwise specified in the purchase order, this part of ISO 10893 is applicable to the detection of predominantly longitudinal imperfections. This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. This part of ISO 10893 can also be applicable to the testing of hollow sections.

Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten in Längs- und/oder Querrichtung - Änderung 1 (ISO 10893-3:2011/Amd 1:2019)

Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 (ISO 10893-3:2011/Amd 1:2019)

Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih (razen obločno varjenih pod praškom), z avtomatsko preiskavo z magnetno sondo - Dopolnilo A1 (ISO 10893-3:2011/Amd 1:2019)

Ta del ISO 10893 določa zahteve za ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih, razen cevi, obločno varjenih pod praškom (SAW), z avtomatsko preiskavo z magnetno sondo. Razen če je v dobavnici določeno drugače, ta del ISO 10893 velja predvsem za odkrivanje vzdolžnih napak. Velja za pregled cevi z zunanjim premerom, večjim ali enakim 10 mm. Ta del ISO 10893 lahko velja tudi za preskušanje votlih delov.

General Information

• Status: Published
• Public Enquiry End Date: 26-Jun-2019
• Publication Date: 04-Nov-2019
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.040.20 - Non-destructive testing of metals
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Oct-2019
• Due Date: 29-Dec-2019
• Completion Date: 05-Nov-2019
• Ref Project: EN ISO 10893-3:2011/A1:2019 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)

Relations

• Amends: SIST EN ISO 10893-3:2011 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
• Effective Date: 02-Jan-2019

Overview

SIST EN ISO 10893-3:2011/A1:2020 is a crucial international standard focused on the non-destructive testing (NDT) of steel tubes. Specifically, it addresses the automated full peripheral flux leakage testing of seamless and welded ferromagnetic steel tubes (excluding submerged arc-welded tubes). This amendment, released by CEN in 2019, introduces a key update affecting the dimensions of the reference notch, improving the accuracy and reliability of detecting longitudinal and transverse imperfections in steel tubes.

This document forms part of the ISO 10893 series and complements the testing framework for steel pipes used in various industrial applications where quality and safety are paramount. The standard is widely recognized and implemented across European countries and by technical committees specializing in steel products.

Key Topics

• Automated Full Peripheral Flux Leakage Testing
  This technique employs magnetic flux leakage (MFL) technology to inspect the entire circumference of ferromagnetic steel tubes. It automatically detects flaws without damaging the pipe, making it an essential non-destructive testing method.

• Scope: Seamless and Welded Steel Tubes
  The standard applies to both seamless and welded ferromagnetic steel tubes, except those joined by submerged arc welding. It covers tubes where integrity is critical for safety and performance.

• Detection of Longitudinal and Transverse Imperfections
  The testing method aims to identify critical defects oriented along the tube axis or across it, such as cracks, laps, and other discontinuities that could compromise structural integrity.

• Amendment 1: Reference Notch Dimension Change
  A significant change introduced in this amendment is the specification concerning the width of the reference notch, which is now limited explicitly to not exceed 1 mm. This adjustment enhances standardization and reproducibility in testing procedures.

• Compliance and Implementation
  The standard is adopted nationally by various European bodies under CEN regulations, ensuring harmonization of steel pipe testing practices throughout Europe and beyond.

Applications

• Quality Assurance in Steel Tube Manufacturing
  Manufacturers of seamless and welded steel tubes utilize this standard to certify their products meet stringent quality requirements before shipment.

• Oil, Gas, and Energy Sectors
  Steel pipes deployed in pressurized environments such as oil and gas pipelines benefit from rigorous inspection to avoid catastrophic failures.

• Automotive and Construction
  Steel tubes used in structural and automotive applications undergo flux leakage testing for early detection of defects that could degrade performance or safety.

• Pressure Vessel and Mechanical Engineering
  Ensuring the integrity of tubes in pressure vessels and machinery is facilitated by non-destructive testing aligned with this standard.

Related Standards

• ISO 10893 Series
  Other parts of ISO 10893 address different NDT methods for steel tubes, providing a comprehensive framework for inspection and testing.

• EN ISO 10893-1
  General principles for non-destructive testing of steel tubes.

• EN ISO 10893-2
  Eddy current testing methods for steel tubes.

• Other CEN/CENELEC Standards
  Complementary standards focusing on steel tube manufacturing and testing procedures.

Conclusion

SIST EN ISO 10893-3:2011/A1:2020 offers enhanced guidance on flux leakage testing of ferromagnetic steel tubes, vital for maintaining high-quality manufacturing and operational safety. The amendment refining the reference notch width underscores ongoing improvements in standardization practices, promoting better defect detection capabilities across industries. Adopting this standard helps organizations ensure compliance, increase reliability, and reduce risk in steel tube applications.

Keywords: non-destructive testing, steel tubes, flux leakage testing, ferromagnetic steel, seamless tubes, welded tubes, reference notch dimensions, longitudinal imperfections, transverse imperfections, EN ISO 10893-3, CEN standard, quality assurance, pipeline testing

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2020
Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih
napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih
(razen obločno varjenih pod praškom), z avtomatsko preiskavo z magnetno sondo
- Dopolnilo A1 (ISO 10893-3:2011/Amd 1:2019)
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage
testing of seamless and welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1
(ISO 10893-3:2011/Amd 1:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von
Unvollkommenheiten in Längs- und/oder Querrichtung - Änderung 1 (ISO 10893-
3:2011/Amd 1:2019)
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite
sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections
longitudinales et/ou transversales - Amendement 1 (ISO 10893-3:2011/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-3:2011/A1:2019
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10893-3:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 77.140.75; 23.040.10; 77.040.20
English Version
Non-destructive testing of steel tubes - Part 3: Automated
full peripheral flux leakage testing of seamless and welded
(except submerged arc-welded) ferromagnetic steel tubes
for the detection of longitudinal and/or transverse
imperfections - Amendment 1: Change of dimensions of
the reference notch (ISO 10893-3:2011/Amd 1:2019)
Essais non destructifs des tubes en acier - Partie 3: Zerstörungsfreie Prüfung von Stahlrohren - Teil 3:
Contrôle automatisé par flux de fuite sur toute la Automatisierte Streuflussprüfung nahtloser und
circonférence des tubes en acier ferromagnétique sans geschweißter (ausgenommen
soudure et soudés (sauf à l'arc immergé sous flux en unterpulvergeschweißter) ferromagnetischer
poudre) pour la détection des imperfections Stahlrohre über den gesamten Rohrumfang zum
longitudinales et/ou transversales - Amendement 1: Nachweis von Unvollkommenheiten in Längs-
Changements de dimensions de l'encoche de référence und/oder Querrichtung - Änderung 1 (ISO 10893-
(ISO 10893-3:2011/Amd 1:2019) 3:2011/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 10893-3:2011; it was approved by CEN on 28 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-3:2011/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10893-3:2011/A1:2019) has been prepared by Technical Committee ISO/TC 17
"Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel
fittings” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent
...