SIST EN 62053-24:2015
(Main)Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5 S, 1S and 1)
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5 S, 1S and 1)
This part of IEC 62053 applies only to newly manufactured transformer operated static varhour
meters of accuracy classes 0,5 S, and 1 S as well as direct connected static var-hour
meters of accuracy class 1, for the measurement of alternating current electrical reactive
energy in 50 Hz or 60 Hz networks and it applies to their type tests only.
This standard uses a conventional definition of reactive energy where the reactive power and
energy is calculated from the fundamental frequency components of the currents and voltages
only. See Clause 3.
NOTE 1 This differs from the approach of IEC 62053-23, where reactive power and energy is defined only for
sinusoidal signals. In this standard reactive power and energy is defined for all periodic signals. Reactive power
and energy is defined in this way to achieve proper reproducibility of measurements with meters of different
designs. With this definition, reactive power and energy reflects the generally unnecessary current possible to
compensate with capacitors rather than the total unnecessary current.
It applies only to static var-hour meters for indoor and outdoor application consisting of a
measuring element and register(s) enclosed together in a meter case. It also applies to
operation indicator(s) and test output(s). If the meter has a measuring element for more than
one type of energy (multi-energy meters), or when other functional elements, like maximum
demand indicators, electronic tariff registers, time switches, ripple control receivers, data
communication interfaces, etc., are enclosed in the meter case, then the relevant standards
for these elements also apply.
NOTE 2 IEC 61869-2:2012 describes transformers having a measuring range of 0,05 In to Imax for accuracy
classes 0,2, 0,5, 1 and 2, and transformers having a measuring range of 0,01 In to Imax for accuracy classes 0,2 S
and 0,5 S. As the measuring range of a meter and its associated transformers have to be matched and as only
transformers of classes 0,2 S / 0,5 S have the current error and phase displacement characteristics suitable to
operate a class 0,5 S / 1 S meter respectively as specified in this standard, the measuring range of the transformer
operated meters will be 0,01 In to Imax. Reactive meters intended to be used together with non-S transformers are,
therefore, not covered by this standard.
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 24: Elektronische Grundschwingungs-Blindverbrauchszähler der Genauigkeitsklassen 0,5 S, 1 S und 1
Équipement de comptage de l’électricité (ca) - Exigences particulieres - Partie 24: Compteurs statiques pour la composante fondamentale de l’énergie réactive (classes 0,5 S, 1S et 1)
L'IEC 62053-24:2014 est applicable uniquement aux compteurs d'énergie réactive statiques neufs des classes de précision 0,5 S et 1 S alimentés par transformateurs ainsi qu'aux compteurs d'énergie réactive statiques neufs à branchement direct de classe de précision 1, destinés à la mesure de l'énergie électrique réactive en courant alternatif sur les réseaux électriques en 50 Hz et 60 Hz, et à leurs essais de type. Elle est fondée sur une définition conventionnelle de l'énergie réactive pour laquelle la puissance et l'énergie réactives ne sont calculées qu'à partir des composantes de fréquence fondamentale des courants et des tensions.
Oprema za merjenje električne energije (izmenični tok) - Posebne zahteve - 24. del: Statični števci osnovne komponente jalove energije (razredi 0,5 S, 1 S in 1) (IEC 62053-24:2014)
Ta del standarda IEC 62053 se uporablja le za novo proizvedene transformatorske statične števce jalove energije razredov natančnosti 0,5 S in 1 S ter neposredno povezane statične števce jalove energije razreda natančnosti 1 za merjenje jalove električne energije pri izmeničnem toku v omrežju 50 Hz ali 60 Hz ter se uporablja le za tipsko preskušanje teh števcev. V tem standardu se uporablja konvencionalna opredelitev jalove energije, kadar se jalova moč in energija izračunata le na podlagi komponent osnovnih frekvenc tokov in napetosti. Glej 3. točko.
OPOMBA 1: Ta pristop se razlikuje od pristopa iz standarda IEC 62053-23, kjer sta jalova moč in energija določeni le za sinusne signale. V tem standardu sta jalova moč in energija določeni za vse periodične signale. Jalova moč in energija sta določeni tako, da se doseže ustrezna ponovljivost meritev z različno zasnovanimi števci. Pri tej opredelitvi jalova moč in energija ne odražata skupnega nepotrebnega toka, ampak splošno nepotreben tok, ki ga je mogoče nadomestiti s kondenzatorji.
Uporablja se le za statične števce jalove energije za notranjo in zunanjo montažo, sestavljene iz merilnega elementa in zapisovalnika, priloženega v merilnem ohišju. Uporablja se tudi kot indikator obratovanja in preskusni izhod. Če ima števec merilni element za več vrst energije (multi energijski števci) ali če so drugi funkcionalni elementi, kot so indikatorji maksimuma, elektronski tarifni registri, časovna stikala, kontrolni prejemniki nihanj, podatkovni komunikacijski vmesniki itd., priloženi v merilno ohišje, se uporabljajo tudi ustrezni standardi za te elemente.
OPOMBA 2: V standardu IEC 61869-2:2012 so opisani transformatorji z merilnim obsegom 0,05 In do Imaks. za razrede natančnosti 0,2, 0,5, 1 in 2 ter transformatorji z merilnim obsegom 0,01 In do Imaks. za razreda natančnosti 0,2 S in 0,5 S. Ker se morata merilni obseg števca in z njim povezanih transformatorjev ujemati in ker imajo le transformatorji razreda 0,2 S/0,5 S značilnosti tokovnega pogreška in faznega pogreška, primerne za delovanje števca razreda 0,5 S/1 S, kot je opredeljeno v tem standardu, bo merilni obseg transformatorskih števcev 0,01 In do Imaks. Števci jalove energije, ki naj bi se uporabljali s transformatorji, ki niso razreda S, zato niso zajeti v tem standardu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Équipement de comptage de l’électricité (ca) - Exigences particulieres - Partie 24: Compteurs statiques pour la composante fondamentale de l’énergie réactive (classes 0,5 S, 1S et 1)Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5 S, 1S and 1)91.140.50Sistemi za oskrbo z elektrikoElectricity supply systems17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN 62053-24:2015SIST EN 62053-24:2015en01-april-2015SIST EN 62053-24:2015SLOVENSKI
STANDARD
SIST EN 62053-24:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62053-24
January 2015 ICS 17.220.20; 91.140.50
English Version
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) (IEC 62053-24:2014)
Équipement de comptage de l'électricité (c.a.) - Exigences particulières - Partie 24: Compteurs statiques d'énergie réactive à la fréquence fondamentale
(classes 0,5 S, 1 S et 1) (IEC 62053-24:2014)
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 24: Elektronische Grundschwingungs-Blindverbrauchszähler
der Genauigkeitsklassen 0,5 S, 1 S und 1 (IEC 62053-24:2014) This European Standard was approved by CENELEC on 2014-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62053-24:2015 E SIST EN 62053-24:2015
EN 62053-24:2015 - 2 - Foreword The text of document 13/1569/FDIS, future edition 1 of IEC 62053-24, prepared by IEC/TC 13 "Electrical energy measurement and control" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62053-24:2015.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-07-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-07-24
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive.
For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this document.
Endorsement notice The text of the International Standard IEC 62053-24:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61869-2:2012 NOTE Harmonized as EN 61869-2:2012 (not modified). IEC 62053-21:2003 NOTE Harmonized as EN 62053-21:2003 (not modified). IEC 62053-23:2003 NOTE Harmonized as EN 62053-23:2003 (not modified). IEC 62053-61:1998 NOTE Harmonized as EN 62053-61:1998 (not modified). SIST EN 62053-24:2015
- 3 - EN 62053-24:2015 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.