Railway applications - Axleboxes - Rolling bearings

This European Standard specifies the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also defines methods for quality assurance and conditions for approval of the products.

Bahnanwendungen - Radsatzlager - Wälzlager

Applications ferroviaires - Boîtes d'essieux - Roulements

Železniške naprave - Ohišja ležajev kolesnih dvojic - Kotalni ležaji - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
31-May-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
01-Apr-2021
Due Date
19-Aug-2021
Completion Date
02-Jun-2021

RELATIONS

Buy Standard

Amendment
SIST EN 12080:2017/oprA1:2021
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 12080:2017/oprA1:2021
01-maj-2021

Železniške naprave - Ohišja ležajev kolesnih dvojic - Kotalni ležaji - Dopolnilo A1

Railway applications - Axleboxes - Rolling bearings
Bahnanwendungen - Radsatzlager - Wälzlager
Applications ferroviaires - Boîtes d'essieux - Roulements
Ta slovenski standard je istoveten z: EN 12080:2017/prA1
ICS:
21.100.20 Kotalni ležaji Rolling bearings
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 12080:2017/oprA1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12080:2017/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 12080:2017/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 12080:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2021
ICS 21.100.20; 45.040
English Version
Railway applications - Axleboxes - Rolling bearings

Applications ferroviaires - Boîtes d'essieux - Bahnanwendungen - Radsatzlager - Wälzlager

Roulements

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 12080:2017. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12080:2017/prA1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

1 Modification to the European foreword ....................................................................................... 4

2 Modification to Clause 2, Normative references ........................................................................ 4

3 Modification to 4.2, Technical specification content ............................................................... 4

4 Modification to 6.3, Traceability ..................................................................................................... 5

5 Modification to 11.2, Marking of rings for cylindrical roller bearings (CRB) ................. 5

6 Modification to 11.3, Marking of cartridge bearings for axleboxes .................................... 5

7 Modification to 12.1, Inspection plan ............................................................................................ 5

8 Modification to Annex C, C.3, Equipment ...................................................................................... 5

9 Modification to Annex D, D.2.4, Conditioning ............................................................................. 5

10 Modification to Annex D, D.3.1.1, General.................................................................................... 5

11 Modification to Annex D, D.3.1.2, Inspection frequency for series production .............. 8

12 Modification to Annex D, D.3.2, Moisture content ..................................................................... 8

13 Modification to Annex D, D.3.4.3, Burrs ........................................................................................ 8

14 Modification to Annex D, D.3.5 Sub-surface quality ................................................................. 8

15 Modification to Annex ZA ................................................................................................................. 10

Annex ZA (informative) Relationship between this European Standard and the Essential

Requirements of Directive (EU) 2016/797 aimed to be covered ...................................... 11

---------------------- Page: 4 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)
European foreword

This document (EN 12080:2017/prA1:2021) has been prepared by Technical Committee CEN/TC 256

“Railway Applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive 2016/797/EC.

For relationship with EU Directive 2016/797/EC, see informative Annex ZA, which is an integral part of

EN 12080:2017.
---------------------- Page: 5 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)
1 Modification to the European foreword
Add the following item in the list of changes:

— The use of conditioning for polymer cages is no longer mandatory and is specified in 4.2

— A clarification of deviations in marking of cylindrical roller bearings is new in 11.2 and 11.3

— The inspection plan for inclusion content in 12.1 (footnote h in Table 3) has been made clearer and

now also includes specifications for sample preparations
— The sensor definition in C.3 is now more relevant
— Conditioning can now be performed also at the bearing manufacturer (see D.2.4)

— The sample frequency for polymeric cages in D.3.1.1 is now more relevant and the terms “Approval”

and “Series” are better defined

— Table D.1 has been renamed for clarity and the requirements for “Viscosity index” and “Length of

glass fibres” have been relaxed to be more relevant

— The requirement for “Mechanical test for material approval” in Table D.1 have been changed so that

it is clear that the Charpy impact test is on “un-notched” samples and made according to the relevant

norm, the requirement for the “Bending strength on the test specimen” is changed and a clarification

on how “Thermal ageing in grease or oil bath” is performed has been added

— Footnote d in Table D.1 now allows for use of inspection certificate 3.1 and a new footnote “h” is

added to specify sampling frequency

— ISO 15512 can be used for moisture content determination in D.3.2 and a clarification on the use of

desiccator is added

— In D.3.4.3 some additions are made on how to address burrs on the edge and outside of functional

areas
— D.3.5 is rewritten to address “void clusters” and Figure D.1 is replaced
— The Annex ZA has been revised to take into account EU Directive 2016/797/EC
2 Modification to Clause 2, Normative references
Add the following reference:
ISO 15512:2016, Plastics — Determination of water content
3 Modification to 4.2, Technical specification content

Replace “18) selection of mechanical testing method for cages of polymeric material (see D.4.1)” with:

“18) selection of mechanical testing method for cages of polymeric material (see D.4.1) and selection if

conditioning shall be used or not for polymer cages (See D.2.4)
---------------------- Page: 6 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)
4 Modification to 6.3, Traceability
Replace ” Chemical analysis (all elements)” with:

Chemical analysis (all elements having content limitations according to ISO 683-17)

Delete spacing before comma accordingly:
“Name, manufacturer”;
5 Modification to 11.2, Marking of rings for cylindrical roller bearings (CRB)
Add the following sentence at the end of 11.2, before Figure 1:

“Deviations from marking on “Chamfer side” according to Figure 1 — Marking of CRB inner rings, shall

be defined in the technical specification according to Clause 4.”
6 Modification to 11.3, Marking of cartridge bearings for axleboxes
Add the following sentence at the end of 11.3, before Figure 2:

Deviations in the location of the marking for cartridge bearings shall be defined in the technical

specification according to Clause 4.
7 Modification to 12.1, Inspection plan

Replace the following footnote h in Table 3 “For ingot casting once every steel melt. For continuous casting

for beginning, middle and end of the casting process. Samples to be taken after forging and heat treatment

on forged bars.” with:

Every melt for ingot cast steel and continuously cast steel. For continuously cast steel, the specimens shall

preferably be from the start and end of the cast. The specimens shall be taken from rolled or forged bar

and shall be hardened and tempered to a minimum of HV350 prior to polishing.
8 Modification to Annex C, C.3, Equipment
Replace ” a sensor with a differential winding”; with:

“a suitable sensor to detect reference artificial defect as described in C.4.3.1”;

9 Modification to Annex D, D.2.4, Conditioning
Replace ” Conditioning shall be performed at the cage manufacturer.” with:

“Conditioning shall be performed at the cage or bearing manufacturer if specified in Clause 4.”

10 Modification to Annex D, D.3.1.1, General

Replace “Samples from the polymeric cages shall be taken from suitable points that are deemed critical

from an injection moulding perspective, such as the area connecting to the cage bar, areas with maximum

wall thickness or material agglomerations. At least one sample shall be taken from one cage. ” with:

“Samples from the polymeric cages shall be taken from suitable points that are deemed critical from an

injection moulding perspective, such as the area connecting to the cage bar, areas with maximum wall

thickness or material agglomerations. At least one sample shall be taken from one cage. Sample frequency

shall be once per batch of cages produced. Samples for test of chemical composition, viscosity index and

density can be taken once per batch of cages produced or per material batch.
---------------------- Page: 7 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)

The term “Approval” in Table D.1 refers to Annex E and the term “Series” in Table D.1 refers to series

production.”
Replace the title of Table D.1 with:
“Table D.1 — Requirements and test method for polymer cages”
Replace Table D1 with:
---------------------- Page: 8 ----------------------
SIST EN 12080:2017/oprA1:2021
EN 12080:2017/prA1:2021 (E)
Material
Property Requirements Test Approval Series
Moisture content (after 1 – 2,5 % D.3.2 Yes Yes
conditioning if required -
D.2.4)
c a g
Chemical composition Yes Yes
c g
Melting point ± 5ˆ[°C] EN ISO 11357-3 Yes Yes
c 3 g
Viscosity index ± 30 [cm /g], Solvent: formic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.