SIST EN 4165-001:2009

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification

This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular connectors with multiple removable modules, intended for use in a temperature range from  55 °C to 175 °C continuous.
This family of connectors is particularly suitable for aeronautic use in zones of severe environmental conditions on board aircraft, applying EN 2282.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungen

Diese Norm legt die allgemeingültigen Eigenschaften, die Qualifikations-, Abnahme- und Qualitätssicherungs¬bedingungen sowie die Prüfprogramme und gruppen für Rechtecksteckverbinder mit mehreren demontier¬baren Modulen fest, die für den Einsatz in einem Temperaturbereich von -55 °C bis 175 °C konstant bestimmt sind.
Diese Steckverbinderfamilie ist besonders geeignet zur Verwendung in der Luftfahrt in Bereichen mit ver¬schärften Umweltbedingungen an Bord von Luftfahrzeugen entsprechend EN 2282.

Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 001 : Spécification technique

Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 001. del: Tehnična specifikacija

General Information

• Status: Withdrawn
• Publication Date: 21-Dec-2008
• Withdrawal Date: 03-Mar-2016
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Mar-2016
• Due Date: 27-Mar-2016
• Completion Date: 04-Mar-2016
• Ref Project: EN 4165-001:2007 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification

Relations

• Replaced By: SIST EN 4165-001:2015 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continous - Part 001: Technical specification
• Effective Date: 01-Dec-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungenSérie aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 001 : Spécification techniqueAerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4165-001:2007SIST EN 4165-001:2009en01-februar-2009SIST EN 4165-001:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4165-001
April 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 °C continuous - Part 001: Technical specification
Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175 °C continu - Partie 001 : Spécification technique
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungen This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-001:2007: ESIST EN 4165-001:2009

* All its parts quoted in this standard. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. SIST EN 4165-001:2009

The plug contains a coupling screw and the receptacle a coupling nut. This family of connectors provides two housing sizes (2 or 4 modules), two series (series 2 and scoop proof series 3) and two mating-unmating systems (screw or rack and panel). The connectors are polarized by centre keying mechanism; polarization shall be obtained before the male contacts enter the module of the female contacts and before the coupling system is engaged. Keying mechanism shall provide 36 position keying capabilities. These connectors use different types of contacts (signal, power, coaxial, …) defined in EN 3155-002. 4.2 Receptacle The receptacle may be attached by:  rectangular flange with two mounting holes;  two end flanges with transversal holes (panel mounting) and lateral holes (stackable mounting). The receptacle contains a centre coupling nut which also ensures the polarization function (coding pin) by external keys. The main key is fixed and is wider than the other. Polarization is ensured by the different positions which the secondary key may take and the different positions in which the coding pin may be fixed in the housing. The module cavities are identified on the housing of the receptacle by letter A, B, C, D for size 4 (four modules) and letter A, B for size 2 (two modules). The cavities are polarized by two keyways location.
3) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. SIST EN 4165-001:2009

The female modules use female contacts and male modules use male contacts. These modules use crimp or solder contacts of sizes 22, 20, 16, 12 and 8. They are rear release and held in the housing by two retention tines. They are removed from the rear with a specific tool. The modules have two keys which engage in the keyways of the housing. Polarization is ensured by the different positions which the secondary keys may take. The modules are identified by letter A, B, C, D or N (universal). A blank module is installed in a cavity where no contacts are required. This module is a male module with a universal polarization (N) installable in all coding cavities (A, B, C, D) and in all housing types (plug or receptacle). Modules shall be interchangeable in cavities of housing with different configurations. 4.7 Keying mechanism 4.7.1 Coding pin (receptacle) Keying mechanism shall provide 36 position keying capabilities. These 36 positions are given with 6 different coding pins, identified by colour code. The main key is wider than the other, polarization is ensured by the SIST EN 4165-001:2009
...