iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 969:1998/A1:1999

(Amendment)

Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für Gasleitungen - Anforderungen und Prüfverfahren

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour canalisations de gaz - Prescriptions et méthodes d'essai

Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki preskušanja - Dopolnilo A1

General Information

Status
Withdrawn
Publication Date
31-Aug-1999
Withdrawal Date
27-Apr-2009
ICS
77.140.75 - Steel pipes and tubes for specific use
91.140.40 - Gas supply systems
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Apr-2009
Due Date
14-May-2009
Completion Date
28-Apr-2009
Directive
89/106/EEC - Construction products
Ref Project
EN 969:1995/A1:1998 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

Relations

Replaced By
SIST EN 969:2009 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
Effective Date
01-Jun-2009
Amends
SIST EN 969:1998 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods
Effective Date
08-Jun-2022

Buy Standard

EN 969:1998/A1:1999EN 969:1998/A1:1999
PreviousNext
Amendment
EN 969:1998/A1:1999
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 969:1998/A1:1999
01-september-1999
Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki
preskušanja - Dopolnilo A1
Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements
and test methods
Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für
Gasleitungen - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
canalisations de gaz - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 969:1995/A1:1998
ICS:
77.140.75 Jeklene cevi in cevni profili St
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 969:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 969:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints used for the construction of external pipelines:
   to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar;
   to be installed below or above ground.
NOTE 1   A combustible gas is a gas or any fuel that is in gaseous state at a temperature of 15 °C at a pressure of 1 bar.
This European Standard applies to pipes, fittings and accessories which are:
   manufactured with socketed, flanged or spigot ends;
   normally delivered externally and internally coated;
   suitable for gas temperatures between  15 °C and 50 °C.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in size ranges extending from DN 40 to DN 600 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shape are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures expressed in bars (100 kPa = 1 bar).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12007-3:2015(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN 12007-3:2015

This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar. This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
This European Standard specifies common basic principles for gas infrastructure. Users of this standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standard, national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
CEN/TR 13737 (all parts) gives:
-  clarification of all legislation/regulations applicable in a member state;
-  if appropriate, more restrictive national requirements;
-  a national contact point for the latest information.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 969:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 969:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints used for the construction of external pipelines:
   to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar;
   to be installed below or above ground.
NOTE 1   A combustible gas is a gas or any fuel that is in gaseous state at a temperature of 15 °C at a pressure of 1 bar.
This European Standard applies to pipes, fittings and accessories which are:
   manufactured with socketed, flanged or spigot ends;
   normally delivered externally and internally coated;
   suitable for gas temperatures between  15 °C and 50 °C.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in size ranges extending from DN 40 to DN 600 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shape are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures expressed in bars (100 kPa = 1 bar).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14800:2007(Main)
Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14800:2007

This European Standard specifies the requirements of performance, the material and the test methods of corrugated flexible safety metallic hose assemblies for the connection of domestic appliances, in order to achieve save operation.
The corrugated metal gas hose assemblies according to this European Standard are suitable for the connection of domestic appliances inside or outside a dwelling, using gas at a pressure lower than 0,5 bar.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15266:2007(Main)
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN 15266:2007

This European Standard specifies the requirements for material, design, manufacture, testing, marking and documentation of stainless steel pliable corrugated gas tubing kits for buildings with a maximum operating pressure (MOP) less than or equal to 0,5 bar and a nominal size range from DN 10 to DN 50.
This document applies to stainless steel pliable corrugated gas tubing kits used for 1st, 2nd and 3rd family gases in residential, commercial and industrial gas installations.
This document does not apply to:
- pliable tubing without cover;
- corrugated safety metal hose assemblies for connection to moveable appliances.
This document does not cover the installation aspects of stainless steel pliable corrugated gas tubing kits.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15070:2007(Main)
Elastomeric packed metallic stripwound safety gas hose assemblies for the connection of domestic appliances using gaseous fuels
prEN 15070

The objective of this European Standard is to achieve safe operation of strip wound flexible metallic gas hose assemblies by specifying the requirements of performance, materials and test methods.
The strip wound flexible metallic gas hose assemblies as specified are suitable for the connection of domestic appliances inside or outside a dwelling, using gas at a pressure lower than 0,5 bar.
These assemblies are designed for the use with movable appliances; they may also be used for the connection of fixed appliances.
Where these assemblies are directly connected to a valve, such a valve shall be compatible with the strip wound flexible metallic gas hose assembly and shall conform to prEN ? (WI 00236004).
The term gas relates to a first, second or third family gas as referred to in EN 437, Table 1. These gases are commonly referred to as manufactured gases, natural gases or petroleum gases (LPG).

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day