SIST EN 4890:2022
(Main)Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
This European Standard specifies the requirements relating to:
Steel X4CrNiMo16-5-1
Air melted
Hardened and tempered
Sheets and plates
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
ASD-STAN designation: FE-PM 3504
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet- und angelassen - Bleche und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Diese Europäische Norm legt die Anforderungen an:
Stahl X4CrNiMo16 5 1
Lufterschmolzen
Gehärtet und angelassen
Bleche und Platten
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
ASD STAN-Werkstoffbezeichnung: FE PM 3504.
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles et plaques - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Le présent document spécifie les exigences relatives à :
Acier X4CrNiMo16-5-1
Élaboré à l’air
Trempé et revenu
Tôles et plaques
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
pour les applications aérospatiales.
Désignation ASD-STAN : FE-PM 3504.
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno - Pločevina in plošče - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa
Ta evropski standard določa zahteve za:
jeklo X4CrNiMo16-5-1,
taljeno na zraku,
utrjeno in mehko žarjeno,
pločevino in plošče,
0,3 mm ≤ a ≤ 50 mm,
900 MPa ≤ Rm ≤ 1050 MPa
za uporabo v aeronavtiki.
Oznaka ASD-STAN: FE-PM 3504.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4890:2022
01-julij-2022
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno -
Pločevina in plošče - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered -
Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet- und
angelassen - Bleche und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles et
plaques - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Ta slovenski standard je istoveten z: EN 4890:2022
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
SIST EN 4890:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4890:2022
---------------------- Page: 2 ----------------------
SIST EN 4890:2022
EN 4890
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -
Hardened and tempered - Sheets and plates - 0,3 mm a
50 mm - 900 MPa Rm 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -
l'air - Trempé et revenu - Tôles et plaques - 0,3 mm Lufterschmolzen - Gehärtet- und angelassen - Bleche
a 50 mm - 900 MPa Rm 1 050 MPa und Platten - 0,3 mm a 50 mm - 900 MPa Rm
1 050 MPa
This European Standard was approved by CEN on 13 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4890:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4890:2022
EN 4890:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 4890:2022
EN 4890:2022 (E)
European foreword
This document (EN 4890:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by November 2022, and conflicting national standards shall be
withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Repu
...
SLOVENSKI STANDARD
oSIST prEN 4890:2020
01-julij-2020
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno -
Pločevina - 0,3 mm ≤ a ≤ 6 mm - 900 MPa ≤ Rm ≤ 1050 MPa
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered -
Sheets - 0,3 mm ≤ a ≤ 6 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet- und
angelassen - Bleche - 0,3 mm ≤ a ≤ 6 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles -
0,3 mm ≤ a ≤ 6 mm - 900 MPa ≤ Rm ≤ 1 050 MP
Ta slovenski standard je istoveten z: prEN 4890
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 4890:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4890:2020
---------------------- Page: 2 ----------------------
oSIST prEN 4890:2020
DRAFT
EUROPEAN STANDARD
prEN 4890
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS
English Version
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -
Hardened and tempered - Sheets - 0,3 mm ≤ a ≤ 6 mm -
900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -
Lufterschmolzen - Gehärtet- und angelassen - Bleche -
l'air - Trempé et revenu - Tôles - 0,3 mm ≤ a ≤ 6 mm -
0,3 mm ≤ a ≤ 6 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
900 MPa ≤ Rm ≤ 1 050 MP
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4890:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4890:2020
prEN 4890:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 4890:2020
prEN 4890:2020 (E)
European foreword
This document (prEN 4890:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Servi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.