iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60990:2002

(Main)

Methods of measurement of touch current and protective conductor current

Methods of measurement of touch current and protective conductor current

Defines measurement methods for d.c. or a.c. of sinusoidal or non-sinusoidal waveform, which could flow through the human body, and current flowing through a protective conductor. The measuring methods recommended for TOUCH CURRENT are based upon the possible effects of current flowing through a human body. In this standard, measurements of current through networks representing the impedance of the human body are referred to as measurements of TOUCH CURRENT. These networks are not necessarily valid for the bodies of animals. The basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. It has the status of a basic safety publication in accordance with IEC Guide 104.

Verfahren zur Messung von Berührungsstrom und Schutzleiterstrom

Méthodes de mesure du courant de contact et du courant dans le conducteur de protection

Définit des méthodes de mesure pour les courants continus ou les courants alternatifs de forme sinusoïdale ou non sinusoïdale qui peuvent traverser le corps humain, et les courants qui peuvent circuler dans un conducteur de protection. Les méthodes de mesure recommandées pour le COURANT DE CONTACT sont basées sur les effets possibles provoqués par le passage du courant dans le corps humain. Dans cette norme, les mesures de courant à travers des réseaux représentant l'impédance du corps humain sont appelées mesures du COURANT DE CONTACT. Les réseaux utilisés ne sont pas nécessairement valables pour des animaux. La présente publication fondamentale de sécurité est destinée principalement à être utilisée par les comités techniques lors de la préparation de normes conformément aux principes figurant dans le Guide 104 et le Guide ISO/CEI 51. Elle n'est pas destinée à être utilisée par les fabricants ou les organismes de certification. Elle a le statut d'une publication fondamentale de sécurité conformément au Guide CEI 104.

Methods of measurement of touch current and protective conductor current

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
29-Jun-2022
ICS
13.260 - Protection against electric shock. Live working
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Jun-2022
Due Date
23-Jul-2022
Completion Date
30-Jun-2022
Ref Project
EN 60990:1999 - Methods of measurement of touch current and protective conductor current

Relations

Replaced By
SIST EN 60990:2017 - Methods of measurement of touch current and protective conductor current
Effective Date
01-Feb-2017

Buy Standard

EN 60990:2002EN 60990:2002
PreviousNext
Standard
EN 60990:2002
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60990:2002
01-september-2002
Methods of measurement of touch current and protective conductor current
Methods of measurement of touch current and protective conductor current
Verfahren zur Messung von Berührungsstrom und Schutzleiterstrom
Méthodes de mesure du courant de contact et du courant dans le conducteur de
protection
Ta slovenski standard je istoveten z: EN 60990:1999
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 60990:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60990:2002

---------------------- Page: 2 ----------------------

SIST EN 60990:2002

---------------------- Page: 3 ----------------------

SIST EN 60990:2002

---------------------- Page: 4 ----------------------

SIST EN 60990:2002

---------------------- Page: 5 ----------------------

SIST EN 60990:2002

---------------------- Page: 6 ----------------------

SIST EN 60990:2002

---------------------- Page: 7 ----------------------

SIST EN 60990:2002

---------------------- Page: 8 ----------------------

SIST EN 60990:2002

---------------------- Page: 9 ----------------------

SIST EN 60990:2002

---------------------- Page: 10 ----------------------

SIST EN 60990:2002

---------------------- Page: 11 ----------------------

SIST EN 60990:2002

---------------------- Page: 12 ----------------------

SIST EN 60990:2002

---------------------- Page: 13 ----------------------

SIST EN 60990:2002

---------------------- Page: 14 ----------------------

SIST EN 60990:2002

---------------------- Page: 15 ----------------------

SIST EN 60990:2002

---------------------- Page: 16 ----------------------

SIST EN 60990:2002

---------------------- Page: 17 ----------------------

SIST EN 60990:2002

---------------------- Page: 18 ----------------------

SIST EN 60990:2002

---------------------- Page: 19 ----------------------

SIST EN 60990:2002

---------------------- Page: 20 ----------------------

SIST EN 60990:2002

---------------------- Page: 21 ----------------------

SIST EN 60990:2002

---------------------- Page: 22 ----------------------

SIST EN 60990:2002

---------------------- Page: 23 ----------------------

SIST EN 60990:2002

---------------------- Page: 24 ----------------------

SIST EN 60990:2002

---------------------- Page: 25 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61481-1:2015/AC:2018(Corrigendum)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61481-1:2014/AC:2015-09
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60990:2017(Main)
Methods of measurement of touch current and protective conductor current
EN 60990:2016

This International Standard defines measurement methods for
– d.c. or a.c. current of sinusoidal or non-sinusoidal waveform, which could flow through the
human body, and
– current flowing through a protective conductor.
The measuring methods recommended for TOUCH CURRENT are based upon the possible
effects of current flowing through a human body. In this standard, measurements of current
through networks representing the impedance of the human body are referred to as
measurements of TOUCH CURRENT. These networks are not necessarily valid for the bodies of
animals.
The specification or implication of specific limit values is not within the scope of this standard.
IEC TS 60479 series provides information regarding the effects of current passing through
the human body from which limit values may be derived.
This standard is applicable to all classes of EQUIPMENT, according to IEC 61140.
The methods of measurement in this standard are not intended to be used for
– TOUCH CURRENTS having less than 1 s duration,
– patient currents as defined in IEC 60601-1,
– a.c. at frequencies below 15 Hz, and
– currents above those chosen for ELECTRIC BURN limits.
This basic safety publication is primarily intended for use by technical committees in the
preparation of standards in accordance with the principles laid down in IEC Guide 104 and
ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies
independent of product standards.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications. The requirements, test
methods or test conditions of this basic safety publication only apply when specifically
referred to or included in the relevant publications.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-1:2015(Main)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
EN 61481-1:2014

This part of IEC 61481 is applicable to portable phase comparators of capacitive type to be
used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or
60 Hz.
This standard is applicable to:
• single-pole phase comparators of capacitive type operating with a memory system up to
36 kV a.c.,
• two-pole phase comparators of capacitive type operating with a wireless connection up to
245 kV a.c.
This standard is applicable to phase comparators of capacitive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-2:2015(Main)
Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 61481-2:2014

This part of IEC 61481 is applicable to portable phase comparators of resistive type to be
used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz
and/or 60 Hz.
This standard is applicable to phase comparators of resistive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of the
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day