Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

2006-07-31:ADC:DOW=DAV+21 months

Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Rückhaltebecken und Staudämmen erforderlich sind

Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation dans la construction des réservoirs et des barrages

Geosintetične ovire - Zahtevane lastnosti pri gradnji rezervoarjev in nasipov

General Information

Status
Withdrawn
Publication Date
31-Dec-2006
Withdrawal Date
03-Nov-2013
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Nov-2013
Due Date
27-Nov-2013
Completion Date
04-Nov-2013

Relations

Buy Standard

Amendment
EN 13361:2004/A1:2007
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13361:2004/A1:2007
01-januar-2007
*HRVLQWHWLþQHRYLUH=DKWHYDQHODVWQRVWLSULJUDGQMLUH]HUYRDUMHYLQQDVLSRY
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs
and dams
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau
von Rückhaltebecken und Staudämmen erforderlich sind
Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour
l'utilisation dans la construction des réservoirs et des barrages
Ta slovenski standard je istoveten z: EN 13361:2004/A1:2006
ICS:
59.080.70 Geotekstilije Geotextiles
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13361:2004/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13361:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 59.080.70; 91.100.50

English Version
Geosynthetic barriers - Characteristics required for use in the
construction of reservoirs and dams
Géomembranes, géosynthétiques bentonitiques - Geosynthetische Dichtungsbahnen - Eigenschaften, die für
Caractéristiques requises pour l'utilisation dans la die Anwendung beim Bau von Rückhaltebecken und
construction des réservoirs et des barrages Staudämmen erforderlich sind
This amendment A1 modifies the European Standard EN 13361:2004; it was approved by CEN on 12 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13361:2004/A1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13361:2004/A1:2006 (E)
Foreword

This document (EN 13361:2004/A1:2006) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by IBN.
This Amendment to the European Standard EN 13361:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2007,
and conflicting national standards shall be withdrawn at the latest by February 2007.

This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
2

---------------------- Page: 3 ----------------------

EN 13361:2004/A1:2006 (E)

List of amendments:
Clause Par., sentence, Current text Proposed modification
table
2  - Add “ISO 527-4, Plastic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.