Geographic information - Referencing by coordinates (ISO 19111:2019)

This document defines the conceptual schema for the description of referencing by coordinates. It describes the minimum data required to define coordinate reference systems. This document supports the definition of:
— spatial coordinate reference systems where coordinate values do not change with time. The system may:
— be geodetic and apply on a national or regional basis, or
— apply locally such as for a building or construction site, or
— apply locally to an image or image sensor;
— be referenced to a moving platform such as a car, a ship, an aircraft or a spacecraft. Such a coordinate reference system can be related to a second coordinate reference system which is referenced to the Earth through a transformation that includes a time element;
— spatial coordinate reference systems in which coordinate values of points on or near the surface of the earth change with time due to tectonic plate motion or other crustal deformation. Such dynamic systems include time evolution, however they remain spatial in nature;
— parametric coordinate reference systems which use a non-spatial parameter that varies monotonically with height or depth;
— temporal coordinate reference systems which use dateTime, temporal count or temporal measure quantities that vary monotonically with time;
— mixed spatial, parametric or temporal coordinate reference systems.
The definition of a coordinate reference system does not change with time, although in some cases some of the defining parameters can include a rate of change of the parameter. The coordinate values within a dynamic and in a temporal coordinate reference system can change with time.
This document also describes the conceptual schema for defining the information required to describe operations that change coordinate values.
In addition to the minimum data required for the definition of the coordinate reference system or coordinate operation, the conceptual schema allows additional descriptive information - coordinate reference system metadata - to be provided.
This document is applicable to producers and users of geographic information. Although it is applicable to digital geographic data, the principles described in this document can be extended to many other forms of spatial data such as maps, charts and text documents.

Geoinformation - Koordinatenreferenzsysteme (ISO 19111:2019)

Information géographique - Système de références par coordonnées (ISO 19111:2019)

Le présent document définit le schéma conceptuel pour la description du référencement par coordonnées. Il décrit les données minimales requises pour définir des systèmes de référence de coordonnées. Le présent document prend en charge la définition des éléments suivants:
— les systèmes de référence de coordonnées spatiaux dans lesquels les valeurs des coordonnées ne changent pas avec le temps. Le système peut:
— être géodésique et s'appliquer à l'échelle nationale ou régionale; ou
— s'appliquer localement, comme dans le cas d'un bâtiment ou d'un chantier de construction; ou
— s'appliquer localement à une image ou un capteur d'image;
— être associé à une plate-forme mobile telle qu'une voiture, un navire, un aéronef ou un engin spatial. Un tel système de référence de coordonnées peut être relié à un deuxième système de référence de coordonnées qui est associé à la Terre par une transformation qui comprend un élément temporel;
— les systèmes de référence de coordonnées spatiaux dans lesquels les valeurs de coordonnées de points situés sur ou près de la surface de la terre, changent avec le temps en raison du mouvement tectonique des plaques ou d'autres déformations de la croûte terrestre. Ces systèmes dynamiques comprennent l'évolution temporelle, mais ils restent de nature spatiale;
— les systèmes de référence de coordonnées paramétriques qui utilisent un paramètre non spatial variant de façon monotone avec la hauteur ou la profondeur;
— les systèmes de référence de coordonnées temporels qui utilisent dateTime, le comptage temporel ou des mesures de grandeur temporelles dont les valeurs varient de façon monotone avec le temps;
— les systèmes de référence de coordonnées mixtes spatiaux, paramétriques ou temporels.
La définition d'un système de référence de coordonnées ne change pas avec le temps, même si dans certains cas, certains paramètres de définition peuvent inclure une vitesse de changement du paramètre. Les valeurs de coordonnées dans un système de référence de coordonnées dynamique et temporel peuvent changer avec le temps.
Le présent document décrit également le schéma conceptuel permettant de définir les informations requises pour décrire les opérations qui modifient les valeurs de coordonnées.
Outre les données minimales requises pour la définition du système de référence de coordonnées ou de l'opération sur les coordonnées, le schéma conceptuel permet de fournir des informations descriptives supplémentaires (métadonnées du système de référence de coordonnées)
Le présent document est applicable aux producteurs et aux utilisateurs d'informations géographiques. Bien qu'il soit applicable aux données géographiques numériques, il est possible d'élargir ses principes à de nombreux autres types de données géographiques tels que les cartes, les tableaux et les textes.

Geografske informacije - Lociranje s koordinatami (ISO 19111:2019)

General Information

Status
Published
Public Enquiry End Date
23-Jan-2020
Publication Date
23-Apr-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Apr-2020
Due Date
20-Jun-2020
Completion Date
24-Apr-2020

RELATIONS

Buy Standard

Standard
SIST EN ISO 19111:2020
English language
154 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 19111:2020
01-junij-2020
Nadomešča:
SIST EN ISO 19111:2008
SIST EN ISO 19111-2:2012
Geografske informacije - Lociranje s koordinatami (ISO 19111:2019)
Geographic information - Referencing by coordinates (ISO 19111:2019)

Information géographique - Système de références par coordonnées (ISO 19111:2019)

Ta slovenski standard je istoveten z: EN ISO 19111:2020
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19111:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19111:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 19111:2020
EN ISO 19111
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Referencing by coordinates (ISO
19111:2019)
Information géographique - Système de références par
coordonnées (ISO 19111:2019)
This European Standard was approved by CEN on 7 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19111:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19111:2020
EN ISO 19111:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 19111:2020
EN ISO 19111:2020 (E)
European foreword

The text of ISO 19111:2019 has been prepared by Technical Committee ISO/TC 211 "Geographic

information/Geomatics” of the International Organization for Standardization (ISO) and has been taken

over as EN ISO 19111:2020 by Technical Committee CEN/TC 287 “Geographic Information” the

secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2020, and conflicting national standards

shall be withdrawn at the latest by September 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 19111:2019 has been approved by CEN as EN ISO 19111:2020 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 19111:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 19111:2020
INTERNATIONAL ISO
STANDARD 19111
Third edition
2019-01
Geographic information —
Referencing by coordinates
Information géographique — Système de références par coordonnées
Reference number
ISO 19111:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)
Contents Page

Foreword ..........................................................................................................................................................................................................................................v

Introduction ..............................................................................................................................................................................................................................vii

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms, definitions, symbols and abbreviated terms ....................................................................................................... 2

3.1 Terms and definitions ....................................................................................................................................................................... 2

3.2 Symbols ......................................................................................................................................................................................................11

3.3 Abbreviated terms ............................................................................................................................................................................11

4 Conformance requirements ...................................................................................................................................................................12

5 Conventions ............................................................................................................................................................................................................13

5.1 Unified Modeling Language notation ...............................................................................................................................13

5.2 Attribute status ....................................................................................................................................................................................13

6 Referencing by coordinates — Data model overview .................................................................................................14

7 Coordinates package .....................................................................................................................................................................................15

7.1 Relationship between coordinates and coordinate reference system .................................................15

7.2 Coordinate reference system identification ................................................................................................................16

7.3 Requirements for coordinate metadata .........................................................................................................................16

7.3.1 Requirements class: Static CRS coordinate metadata ...................................................................16

7.3.2 Requirements class: Dynamic CRS coordinate metadata ..........................................................17

7.4 UML schema for the Coordinates package ...................................................................................................................17

7.5 UML schema for change of coordinates ..........................................................................................................................19

8 Common Classes package .........................................................................................................................................................................21

8.1 General attributes ..............................................................................................................................................................................21

8.1.1 Introduction ......................................................................................................................................................................21

8.1.2 Name and alias................................................................................................................................................................21

8.1.3 Identifier ..............................................................................................................................................................................21

8.1.4 Scope and Domain of Validity ............................................................................................................................21

8.2 UML schema for the Common Classes package .......................................................................................................22

9 Coordinate Reference Systems package ....................................................................................................................................25

9.1 Coordinate reference system ...................................................................................................................................................25

9.1.1 General...................................................................................................................................................................................25

9.1.2 Principal subtypes of coordinate reference system .......................................................................25

9.2 Derived coordinate reference system ..............................................................................................................................26

9.2.1 General...................................................................................................................................................................................26

9.2.2 Projected coordinate reference system .....................................................................................................26

9.3 Compound coordinate reference system .......................................................................................................................27

9.3.1 General...................................................................................................................................................................................27

9.3.2 Spatial compound coordinate reference system ...............................................................................27

9.3.3 Spatio-temporal compound coordinate reference system .......................................................27

9.3.4 Spatio-parametric compound coordinate reference system ..................................................27

9.3.5 Spatio-parametric-temporal compound coordinate reference system .........................27

9.4 UML schema for the Coordinate Reference Systems package .....................................................................27

10 Coordinate Systems package .................................................................................................................................................................36

10.1 Coordinate system — General ................................................................................................................................................36

10.2 Parametric coordinate system ................................................................................................................................................37

10.3 Temporal coordinate system....................................................................................................................................................37

10.4 Coordinate system axis .................................................................................................................................................................38

10.5 UML schema for the Coordinate Systems package................................................................................................38

11 Datums (reference frames) package ............................................................................................................................................49

11.1 Types of datum and reference frame ................................................................................................................................49

© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)

11.2 Geodetic reference frame ............................................................................................................................................................49

11.2.1 Prime meridian ..............................................................................................................................................................49

11.2.2 Ellipsoid ................................................................................................................................................................................49

11.3 Dynamic reference frame ............................................................................................................................................................50

11.4 Datum ensemble .................................................................................................................................................................................50

11.5 Temporal datum ..................................................................................................................................................................................50

11.6 UML schema for the Datums package ..............................................................................................................................50

12 Coordinate Operations package ........................................................................................................................................................58

12.1 General characteristics of coordinate operations ..................................................................................................58

12.2 UML schema for the Coordinate Operations package ........................................................................................59

Annex A (normative) Abstract test suite .......................................................................................................................................................71

Annex B (informative) Spatial referencing by coordinates — Geodetic concepts ..............................................76

Annex C (informative) Spatial referencing by coordinates — Context for modelling.....................................81

Annex D (informative) Temporal referencing by coordinates — Context for modelling ............................95

Annex E (informative) Examples............................................................................................................................................................................99

Annex F (informative) Recommended best practice for interfacing to ISO 19111 ........................................137

Annex G (informative) Backward compatibility with ISO 19111:2007 .....................................................................138

Bibliography .........................................................................................................................................................................................................................143

iv © ISO 2019 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso

.org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics,

in close collaboration with the Open Geospatial Consortium (OGC).

This third edition cancels and replaces the second edition (ISO 19111:2007), which has been technically

revised. This document also incorporates the provisions of ISO 19111-2:2009, which is cancelled.

The changes in this edition compared to the previous edition are:
— inclusion of applicable modern geodetic terminology;
— extension to describe dynamic geodetic reference frames;
— extension to describe geoid-based vertical coordinate reference systems;
— extension to allow triaxial ellipsoid for planetary applications;

— extension to describe three-dimensional projected coordinate reference systems;

— addition of 'datum ensembles' to allow grouping of related realizations of a reference frame where

for lower accuracy applications the differences are insignificant;
— clarification in the modelling of derived coordinate reference systems;
— remodelling of the metadata elements scope and extent;

— addition of requirements to describe coordinate metadata and the relationship between spatial

coordinates;

— additional modelling of temporal coordinate reference system components sufficient for spatio-

temporal coordinate referencing;

— consolidation of the provisions of ISO 19111-2:2009 (Spatial referencing by coordinates — Extension

for parametric values) into this document;
© ISO 2019 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)

— change in name from 'Spatial referencing by coordinates' to 'Referencing by coordinates', due to the

inclusion of the non-spatial coordinate reference system subtypes of parametric (from ISO 19111-2)

and temporal;
— the correction of minor errors.
Further details are given in Annex G.

In accordance with the ISO/IEC Directives, Part 2, 2018, Rules for the structure and drafting of

International Standards, in International Standards the decimal sign is a comma on the line. However the

General Conference on Weights and Measures (Conférence Générale des Poids et Mesures) at its meeting

in 2003 passed unanimously the following resolution:
“The decimal marker shall be either a point on the line or a comma on the line.”

In practice, the choice between these alternatives depends on customary use in the language concerned.

In the technical areas of geodesy and geographic information it is customary for the decimal point

always to be used, for all languages. That practice is used throughout this document.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
vi © ISO 2019 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)
Introduction

Geographic information is inherently four-dimensional and includes time. The spatial component

relates the features represented in geographic data to positions in the real world. Spatial references fall

into two categories:
— those using coordinates;
— those based on geographic identifiers.
[5]

Spatial referencing by geographic identifiers is defined in ISO 19112 . This document describes the

data elements, relationships and associated metadata required for spatial referencing by coordinates,

expanded from a strictly spatial context to include time. The temporal element is restricted to temporal

coordinate systems having a continuous axis. The temporal element excludes calendars and ordinal

reference systems due to their complexities in definition and in transformation. The context is shown

in Figure 1.
Figure 1 — Context of referencing by coordinates

Certain scientific communities use three-dimensional systems where horizontal position is combined

with a non-spatial parameter. In these communities, the parameter is considered to be a third, vertical,

axis. The parameter, although varying monotonically with height or depth, does not necessarily vary in

a simple manner. Thus conversion from the parameter to height or depth is non-trivial. The parameters

concerned are normally absolute measurements and the datum is taken with reference to a direct

physical measurement of the parameter. These non-spatial parameters and parametric coordinate

reference system modelling constructs were previously described in ISO 19111-2:2009 but have been

incorporated into this revision because the modelling constructs are identical to the other coordinate

reference system types included in this document.

This document describes the elements that are necessary to fully define various types of coordinate

reference systems applicable to geographic information. The subset of elements required is partially

dependent upon the type of coordinates. This document also includes optional fields to allow for the

© ISO 2019 – All rights reserved vii
---------------------- Page: 13 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)

inclusion of metadata about the coordinate reference systems. The elements are intended to be both

machine and human readable.

In addition to describing a coordinate reference system, this document provides for the description of

a coordinate operation between two different coordinate reference systems or a coordinate operation

to account for crustal motion over time. With such information, spatial data referenced to different

coordinate reference systems can be referenced to one specified coordinate reference system at one

specified time. This facilitates spatial data integration. Alternatively, an audit trail of coordinate

manipulations can be maintained.
viii © ISO 2019 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 19111:2020
INTERNATIONAL STANDARD ISO 19111:2019(E)
Geographic information — Referencing by coordinates
1 Scope

This document defines the conceptual schema for the description of referencing by coordinates. It

describes the minimum data required to define coordinate reference systems. This document supports

the definition of:

— spatial coordinate reference systems where coordinate values do not change with time. The

system may:
— be geodetic and apply on a national or regional basis, or
— apply locally such as for a building or construction site, or
— apply locally to an image or image sensor;

— be referenced to a moving platform such as a car, a ship, an aircraft or a spacecraft. Such a

coordinate reference system can be related to a second coordinate reference system which is

referenced to the Earth through a transformation that includes a time element;

— spatial coordinate reference systems in which coordinate values of points on or near the surface of

the earth change with time due to tectonic plate motion or other crustal deformation. Such dynamic

systems include time evolution, however they remain spatial in nature;

— parametric coordinate reference systems which use a non-spatial parameter that varies

monotonically with height or depth;

— temporal coordinate reference systems which use dateTime, temporal count or temporal measure

quantities that vary monotonically with time;
— mixed spatial, parametric or temporal coordinate reference systems.

The definition of a coordinate reference system does not change with time, although in some cases some

of the defining parameters can include a rate of change of the parameter. The coordinate values within

a dynamic and in a temporal coordinate reference system can change with time.

This document also describes the conceptual schema for defining the information required to describe

operations that change coordinate values.

In addition to the minimum data required for the definition of the coordinate reference system or

coordinate operation, the conceptual schema allows additional descriptive information - coordinate

reference system metadata - to be provided.

This document is applicable to producers and users of geographic information. Although it is applicable

to digital geographic data, the principles described in this document can be extended to many other

forms of spatial data such as maps, charts and text documents.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 8601, Data elements and interchange formats — Information interchange — Representation of dates

and times
© ISO 2019 – All rights reserved 1
---------------------- Page: 15 ----------------------
SIST EN ISO 19111:2020
ISO 19111:2019(E)
ISO 19103, Geographic information — Conceptual schema language
ISO 19115-1:2014, Geographic information — Metadata — Part 1: Fundamentals
3 Terms, definitions, symbols and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
3.1.1
affine coordinate system

coordinate system in Euclidean space with straight axes that are not necessarily mutually perpendicular

3.1.2
Cartesian coordinate system

coordinate system in Euclidean space which gives the position of points relative to n mutually

perpendicular straight axes all having the same unit of measure
Note 1 to entry: n is 2 or 3 for the purposes of this document.

Note 2 to entry: A Cartesian coordinate system is a specialisation of an affine coordinate system.

3.1.3
compound coordinate reference system

coordinate reference system using at least two independent coordinate reference systems

Note 1 to entry: Coordinate reference systems are independent of each other if coordinate values in one cannot

be converted or transformed into coordinate values in the other.
3.1.4
concatenated operation
coordinate operation consisting of the sequential app
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.