SIST EN ISO 1302:2004/oprA2:2010

Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation - Amendment 2: Indication of material ratio requirements (ISO 1302:2002/DAM 2:2010)

2013-12-13 EMA: WI deleted as equivalent ISO project is cancelled.

Geometrische Produktspezifikation (GPS) - Angabe der Oberflächenbeschaffenheit in technischen Produktdokumentationen - Änderung 2: Angabe der Anforderungen an den Materialanteil (ISO 1302:2002/DAM 2:2010)

Spécification géométrique des produits (GPS) - Indication des états de surface dans la documentation technique de produits - Amendement 2: Indication des exigences pour le taux de longueur portante (ISO 1302:2002/DAM 2:2010)

Specifikacija geometrijskih veličin izdelka - Označevanje površinskih tekstur v tehniški delavniški dokumentaciji izdelka - Dopolnilo 2: Označevanje zahtev v zvezi z materialnim deležem (ISO 1302:2002/DAM 2:2010)

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Oct-2010
• ICS: 01.110 - Technical product documentation
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 09-Dec-2019
• Due Date: 14-Dec-2019
• Completion Date: 09-Dec-2019
• Ref Project: EN ISO 1302:2002/prA2 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation - Amendment 2: Indication of material ratio requirements (ISO 1302:2002/DAM 2:2010)

Relations

• Amends: SIST EN ISO 1302:2004 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
• Effective Date: 22-Dec-2008
• Amends: SIST EN ISO 1302:2004 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1302:2004/oprA2:2010
01-oktober-2010
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND2]QDþHYDQMHSRYUãLQVNLKWHNVWXUY
WHKQLãNLGHODYQLãNLGRNXPHQWDFLMLL]GHOND'RSROQLOR2]QDþHYDQMH]DKWHYY
]YH]L]PDWHULDOQLPGHOHåHP,62'$0
Geometrical Product Specifications (GPS) - Indication of surface texture in technical
product documentation - Amendment 2: Indication of material ratio requirements (ISO
1302:2002/DAM 2:2010)
Geometrische Produktspezifikation (GPS) - Angabe der Oberflächenbeschaffenheit in
technischen Produktdokumentationen - Änderung 2: Angabe der Anforderungen an den
Materialanteil (ISO 1302:2002/DAM 2:2010)
Spécification géométrique des produits (GPS) - Indication des états de surface dans la
documentation technique de produits - Amendement 2: Indication des exigences pour le
taux de longueur portante (ISO 1302:2002/DAM 2:2010)
Ta slovenski standard je istoveten z: EN ISO 1302:2002/prA2
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 1302:2004/oprA2:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1302:2004/oprA2:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 1302:2004/oprA2:2010


EUROPEAN STANDARD
DRAFT
EN ISO 1302:2002
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
July 2010
ICS 17.040.20; 01.100.20
English Version
Geometrical Product Specifications (GPS) - Indication of surface
texture in technical product documentation - Amendment 2:
Indication of material ratio requirements (ISO 1302:2002/DAM
2:2010)
Spécification géométrique des produits (GPS) - Indication Geometrische Produktspezifikation (GPS) - Angabe der
des états de surface dans la documentation technique de Oberflächenbeschaffenheit in technischen
produits - Amendement 2: Indication des exigences pour le Produktdokumentationen - Änderung 2: Angabe der
taux de longueur portante (ISO 1302:2002/DAM 2:2010) Anforderungen an den Materialanteil (ISO 1302:2002/DAM
2:2010)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 290.

This draft amendment A2, if approved, will modify the European Standard EN ISO 1302:2002. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1302:2002/prA2:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
EN ISO 1302:2002/prA2:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
EN ISO 1302:2002/prA2:2010 (E)
Foreword
This document (EN ISO 1302:2002/prA2:2010) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of
which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 1302:2002/DAM 2:2010 has been approved by CEN as a EN ISO 1302:2002/prA2:2010
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1302:2004/oprA2:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
DRAFT AMENDMENT ISO 1302:2002/DAmd 2
ISO/TC 213 Secretariat: DS
Voting begins on: Voting terminates on:
2010-07-22 2010-12-22
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical Product Specifications (GPS) — Indication of
surface texture in technical product documentation
AMENDMENT 2: Indication of material ratio requirements
Spécification géométrique des produits (GPS) — Indication des états de surface dans la documentation
technique de produits
AMENDEMENT 2: Indication des exigences pour le taux de longueur portante
ICS 01.100.20; 17.040.20

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
ISO 1302:2002/DAmd 2
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2010 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
ISO 1302:2002/DAM 2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO 1302:2002 was prepared by Technical Committee ISO/TC 213, Dimensional and
geometrical product specifications and verification.
© ISO 2010 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 1302:2004/oprA2:2010

---------------------- Page: 10 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
DRAFT AMENDMENT ISO 1302:2002/DAM 2

Geometrical Product Specifications (GPS) — Indication of
surface texture in technical product documentation
AMENDMENT 2: Indication of material ratio requirements
Page 46, Bibliography
Add the following annexes before the Bibliography:
Annex K
(informative)

Indication of material ratio requirements
K.1 Data included in material ratio requirements
A surface texture requirement is constructed from a number of different control elements that may be part of
the indication on the drawing or part of text indication in other documents. The elements are shown in K.2 for
the material ratio of the R- and W-profiles and in K.4 for the material ratio of the P-profile.
Experience has shown that all these elements are necessary in order to establish an unambiguous
relationship between the surface texture requirement and the function of the surface. Most of these features
are also necessary in order to set the measuring instrument. Others are necessary in order to obtain an
unambiguous evaluation of the result of the measurement and for comparison with the specification limit(s).
In order to simplify the indication of surface texture requirements and to maintain the unambiguous
relationship between drawing indication and the function of the surface, a number of default conditions have
been defined. These conditions apply if no indication is made on the drawing. The default conditions result in
simpler surface texture indications. However, the principle concerning default definitions has not been
completed for all parameters. Standards ISO 3274:1996, ISO 4287:2002, and ISO 4288:1996 contains
information on default definitions if such exist.
In those cases when no default definitions exist, complete information on, for example, the interpretation of
specification limit(s), transmission band and evaluation length shall be given in the indication of the surface
texture requirement on the drawing in order to make the requirement unambiguous and meaningful.
© ISO 2010 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 1302:2004/oprA2:2010
ISO
...