International Electrotechnical Vocabulary (IEV) - Part 904: Environmental standardization for electrical and electronic products and systems

IEC 60050-904:2015 gives the general terminology used in the field of environmental standardization for electrical and electronic products and systems. It has the status of a horizontal standard in accordance with IEC Guide 108. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.

Vocabulaire Electrotechnique International (IEV) - Partie 904: Normalisation environnementale pour les produits et les systèmes électriques et électroniques

IEC 60050-904:2015 donne la terminologie générale utilisée dans le domaine de l appréciation de la normalisation environnementale pour les produits et les systèmes électriques et électroniques. Elle a le statut de norme horizontale conformément au Guide IEC 108. Cette terminologie est en accord avec la terminologie figurant dans les autres parties spécialisées de l'IEV.

[Not translated]

General Information

Status
Not Published
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Mar-2022
Due Date
22-May-2022

Buy Standard

Standard
IEC 60050-904:2014 - International Electrotechnical Vocabulary (IEV) - Part 904: Environmental standardization for electrical and electronic products and systems
English and French language
49 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC 60050-904
Edition 1.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
HORIZONTAL STANDARD
NORME HORIZONTALE
International Electrotechnical Vocabulary –
Part 904: Environmental standardization for electrical and electronic products
and systems
Vocabulaire Electrotechnique International –
Partie 904: Normalisation environnementale pour les produits et les systèmes
électriques et électroniques
IEC 60050-904:2014-11(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2014 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite

ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org

The stand-alone application for consulting the entire The world's leading online dictionary of electronic and

bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and

Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15

documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International

iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary

The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in

variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions

committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries

and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc

details all new publications released. Available online and If you wish to give us your feedback on this publication or

also once a month by email. need further assistance, please contact the Customer Service

Centre: csc@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC

en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et

comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus

projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just

Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette

Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:

csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60050-904
Edition 1.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
HORIZONTAL STANDARD
NORME HORIZONTALE
International Electrotechnical Vocabulary –
Part 904: Environmental standardization for electrical and electronic products
and systems
Vocabulaire Electrotechnique International –
Partie 904: Normalisation environnementale pour les produits et les systèmes
électriques et électroniques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.040.29; 13.020 ISBN 978-2-8322-2300-0

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– II – IEC 60050-904:2014 © IEC 2014
CONTENTS

FOREWORD ......................................................................................................................... IV

INTRODUCTION Principles and rules followed .................................................................... VII

1 Scope ............................................................................................................................... 1

2 Terms and definitions ....................................................................................................... 1

INDEX .................................................................................................................................. 46

---------------------- Page: 4 ----------------------
IEC 60050-904:2014 © IEC 2014 – III –
SOMMAIRE

AVANT-PROPOS ................................................................................................................... V

INTRODUCTION Principes d’établissement et règles suivies ................................................. X

1 Domaine d’application ...................................................................................................... 2

2 Termes et définitions ........................................................................................................ 2

INDEX .................................................................................................................................. 48

---------------------- Page: 5 ----------------------
– IV – IEC 60050-904:2014 © IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_______________
INTERNATIONAL ELECTROTECHNICAL VOCABULARY –
Part 904: Environmental standardization for electrical and electronic
products and systems
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as

“IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee

interested in the subject dealt with may participate in this preparatory work. International, governmental and

non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates

closely with the International Organization for Standardization (ISO) in accordance with conditions determined

by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of

IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other

IEC Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60050-904 has been prepared by IEC technical committee 1:

Terminology.

This first edition comprises terminology formerly published in IEC 62542, and reviewed as

change request C00011 for inclusion in the International Electrotechnical Vocabulary.

This publication was developed in accordance with the ISO/IEC Directives, Part 1,

IEC Supplement, Annexes SK and SL, and was approved by the validation team of
IEC technical committee 1: Terminology, under the normal database procedure.

A list of all parts of the IEC 60050 series, published under the general title International

Electrotechnical Vocabulary can be found on the IEC website and is available at
http://www.electropedia.org.

All parts of the IEC 60050 series have the status of a horizontal standard in accordance with

IEC Guide 108.
---------------------- Page: 6 ----------------------
IEC 60050-904:2014 © IEC 2014 – V –
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
________________
VOCABULAIRE ÉLECTROTECHNIQUE INTERNATIONAL –
Partie 904: Normalisation environnementale pour les produits et les
systèmes électriques et électroniques
AVANT-PROPOS

1) La Commission Electrotechnique Internationale (IEC) est une organisation mondiale de normalisation

composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de l’IEC). L’IEC a pour

objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines

de l'électricité et de l'électronique. A cet effet, l’IEC – entre autres activités – publie des Normes

internationales, des Spécifications techniques, des Rapports techniques, des Spécifications accessibles au

public (PAS) et des Guides (ci-après dénommés "Publication(s) de l’IEC"). Leur élaboration est confiée à des

comités d'études, aux travaux desquels tout Comité national intéressé par le sujet traité peut participer. Les

organisations internationales, gouvernementales et non gouvernementales, en liaison avec l’IEC, participent

également aux travaux. L’IEC collabore étroitement avec l'Organisation Internationale de Normalisation (ISO),

selon des conditions fixées par accord entre les deux organisations.

2) Les décisions ou accords officiels de l’IEC concernant les questions techniques représentent, dans la mesure

du possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux de

l’IEC intéressés sont représentés dans chaque comité d’études.

3) Les Publications de l’IEC se présentent sous la forme de recommandations internationales et sont agréées

comme telles par les Comités nationaux de l’IEC. Tous les efforts raisonnables sont entrepris afin que

l’IEC s'assure de l'exactitude du contenu technique de ses publications; l’IEC ne peut pas être tenue

responsable de l'éventuelle mauvaise utilisation ou interprétation qui en est faite par un quelconque utilisateur

final.

4) Dans le but d'encourager l'uniformité internationale, les Comités nationaux de l’IEC s'engagent, dans toute la

mesure possible, à appliquer de façon transparente les Publications de l’IEC dans leurs publications nationales

et régionales. Toutes divergences entre toutes Publications de l’IEC et toutes publications nationales ou

régionales correspondantes doivent être indiquées en termes clairs dans ces dernières.

5) L’IEC elle-même ne fournit aucune attestation de conformité. Des organismes de certification indépendants

fournissent des services d'évaluation de conformité et, dans certains secteurs, accèdent aux marques de

conformité de l’IEC. L’IEC n'est responsable d'aucun des services effectués par les organismes de certification

indépendants.

6) Tous les utilisateurs doivent s'assurer qu'ils sont en possession de la dernière édition de cette publication.

7) Aucune responsabilité ne doit être imputée à l’IEC, à ses administrateurs, employés, auxiliaires ou

mandataires, y compris ses experts particuliers et les membres de ses comités d'études et des Comités

nationaux de l’IEC, pour tout préjudice causé en cas de dommages corporels et matériels, ou de tout autre

dommage de quelque nature que ce soit, directe ou indirecte, ou pour supporter les coûts (y compris les frais

de justice) et les dépenses découlant de la publication ou de l'utilisation de cette Publication de l’IEC ou de

toute autre Publication de l’IEC, ou au crédit qui lui est accordé.

8) L'attention est attirée sur les références normatives citées dans cette publication. L'utilisation de publications

référencées est obligatoire pour une application correcte de la présente publication.

9) L’attention est attirée sur le fait que certains des éléments de la présente Publication de l’IEC peuvent faire

l’objet de droits de propriété intellectuelle ou de droits analogues. L’IEC ne saurait être tenue pour responsable

de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence.

La Norme internationale IEC 60050-904 a été établie par le comité d'études 1 de l'IEC:

Terminologie.

Cette première édition comprend la terminologie publiée auparavant dans l'IEC 62542, et

revue en tant que « change request » C00014 pour inclusion dans le Vocabulaire
Electrotechnique International.

Cette publication a été développée en conformité avec les Annexes SK et SL du Supplément

IEC aux Directives ISO/IEC, Partie 1, et a été approuvée par l’équipe de validation du comité

d'études 1 de l’IEC: Terminologie, selon la procédure base de données «normale».
---------------------- Page: 7 ----------------------
– VI – IEC 60050-904:2014 © IEC 2014

Une liste de toutes les parties de la série IEC 60050, publiée sous le titre général Vocabulaire

Electrotechnique International, peut être consultée sur le site web de l’IEC et est disponible à

l’adresse www.electropedia.org.

Toutes les parties de la série IEC 60050 ont le statut d'une norme horizontale conformément

au Guide IEC 108.
---------------------- Page: 8 ----------------------
IEC 60050-904:2014 © IEC 2014 – VII –
INTRODUCTION
Principles and rules followed
General

The IEV (IEC 60050 series) is a general purpose multilingual vocabulary covering the field of

electrotechnology, electronics and telecommunication (available at www.electropedia.org). It

comprises about 20 000 terminological entries, each corresponding to a concept. These

entries are distributed among about 80 parts, each part corresponding to a given field.

EXAMPLE
Part 161 (IEC 60050-161): Electromagnetic compatibility
Part 411 (IEC 60050-411): Rotating machines

The entries follow a hierarchical classification scheme Part/Section/Concept; within the

sections, the concepts are organized in a systematic order.

The terms and definitions (and possibly non-verbal representations, examples, notes to entry

and sources) in the entries are given in two or more of the three IEC languages, that is

French, English and Russian (principal IEV languages).

In each entry, the terms alone are also given in several of the additional IEV languages

[Arabic (ar), Czech (cs), German (de), Spanish (es), Finnish (fi), Italian (it), Japanese (ja),

Norwegian (no), Polish (pl), Portuguese (pt), Slovenian (sl), Serbian (sr), Swedish (sv) and

Chinese (zh)].
Organization of a terminological entry
Each of the entries corresponds to a concept, and comprises:
- an entry number,
- possibly a letter symbol for the quantity or unit,
then, for the principal IEV languages present in the part:

- the term designating the concept, called “preferred term”, possibly accompanied by

synonyms and abbreviations,
- the definition of the concept,
- possibly non-verbal representations, examples and notes to entry,
- possibly the source,
and finally, for the additional IEV languages, the terms alone.
Entry number
The entry number is comprised of three elements, separated by hyphens:
Part number: 3 digits,
Section number: 2 digits,
Concept number: 2 digits (01 to 99).
EXAMPLE 131-13-22
---------------------- Page: 9 ----------------------
– VIII – IEC 60050-904:2014 © IEC 2014
Letter symbols for quantities and units

These symbols, which are language independent, are given on a separate line following the

entry number.
EXAMPLE
131-12-04
resistance
Preferred term and synonyms

The preferred term is the term that heads a terminological entry in a given language; it may

be followed by synonyms. It is printed in boldface.
Synonyms:

The synonyms are printed on separate lines under the preferred term: preferred synonyms are

printed in boldface, and deprecated synonyms are printed in lightface. Deprecated synonyms

are prefixed by the text “DEPRECATED:”.
Absence of an appropriate term:

When no appropriate term exists in a given language, the preferred term is replaced by five

dots, as follows:
.....
“ ” (and there are of course no synonyms).
Attributes

Each term (or synonym) may be followed by attributes giving additional information, and

printed in lightface on the same line as the corresponding term, following this term.

EXAMPLE
specific use of the term:
transmission line,
national variant:
lift, GB
grammatical information:
quantize, verb
transient, noun
AC, adj
Source

In some cases, it has been necessary to include in an IEV part a concept taken from another

IEV part, or from another authoritative terminology document (ISO/IEC Guide 99,

ISO/IEC 2382, etc.), either with or without modification to the definition (and possibly to the

term).

This is indicated by the mention of this source, printed in lightface, and placed at the end of

the entry in each of the principal IEV languages present.
EXAMPLE SOURCE: IEC 60050-131:2002, 131-03-13, modified
---------------------- Page: 10 ----------------------
IEC 60050-904:2014 © IEC 2014 – IX –
Terms in additional IEV languages

These terms are placed following the entries in the principal IEV languages, on separate lines

(a single line for each language), preceded by the alpha-2 code for the language defined in

ISO 639-1, and in the alphabetic order of this code.
---------------------- Page: 11 ----------------------
– X – IEC 60050-904:2014 © IEC 2014
INTRODUCTION
Principes d’établissement et règles suivies
Généralités

L'IEV (série de normes IEC 60050) est un vocabulaire multilingue à usage général couvrant le

champ de l’électrotechnique, de l’électronique et des télécommunications (disponible à

www.electropedia.org). Il comprend environ 20 000 articles terminologiques correspondant

chacun à un concept (une notion). Ces articles sont répartis dans environ 80 parties, chacune

correspondant à un domaine donné.
EXEMPLE
Partie 161 (IEC 60050-161): Compatibilité électromagnétique
Partie 411 (IEC 60050-411): Machines tournantes

Les articles suivent un schéma de classification hiérarchique Partie/Section/Concept, les

concepts étant, au sein des sections, classés par ordre systématique.

Les termes et définitions (et éventuellement les représentations non verbales, exemples,

notes à l'article et sources) sont donnés dans deux ou plus des trois langues de l’IEC, c’est-à-

dire français, anglais et russe (langues principales de l'IEV).

Dans chaque article, les termes seuls sont également donnés dans plusieurs des langues

additionnelles de l'IEV [arabe (ar), tchèque (cs), allemand (de), espagnol (es), finnois (fi),

italien (it), japonais (ja), norvégien (no), polonais (pl), portugais (pt), slovène (sl), serbe (sr),

suédois (sv) et chinois (zh)].
Constitution d’un article terminologique
Chacun des articles correspond à un concept, et comprend:
* un numéro d’article,
* éventuellement un symbole littéral de grandeur ou d’unité,
puis, pour chaque langue principale de l'IEV présente dans la partie:
* le terme désignant le concept, appelé « terme privilégié », éventuellement
accompagné de synonymes et d’abréviations,
* la définition du concept,
* éventuellement des représentations non verbales, des exemples et des notes à
l’article,
* éventuellement la source,
et enfin, pour les langues additionnelles de l'IEV, les termes seuls.
Numéro d’article
Le numéro d’article comprend trois éléments, séparés par des traits d’union:
Numéro de partie: 3 chiffres,
Numéro de section: 2 chiffres,
Numéro du concept: 2 chiffres (01 à 99).
EXEMPLE 131-13-22
---------------------- Page: 12 ----------------------
IEC 60050-904:2014 © IEC 2014 – XI –
Symboles littéraux de grandeurs et d’unités

Ces symboles, indépendants de la langue, sont donnés sur une ligne séparée suivant le

numéro d’article.
EXEMPLE
131-12-04
résistance, f
Terme privilégié et synonymes

Le terme privilégié est le terme qui figure en tête d’un article dans une langue donnée; il peut

être suivi par des synonymes. Il est imprimé en gras.
Synonymes:

Les synonymes sont imprimés sur des lignes séparées sous le terme privilégié: les

synonymes privilégiés sont imprimés en gras, et les synonymes déconseillés sont imprimés

en maigre. Les synonymes déconseillés sont précédés par le texte « DÉCONSEILLÉ: ».

Absence de terme approprié:

Lorsqu’il n’existe pas de terme approprié dans une langue, le terme privilégié est remplacé

par cinq points, comme ceci:
.....
« » (et il n’y a alors bien entendu pas de synonymes).
Attributs
Chaque terme (ou synonyme) peut être suivi d’attributs donnant des informations

supplémentaires; ces attributs sont imprimés en maigre, à la suite de ce terme, et sur la

même ligne.
EXEMPLE
spécificité d’utilisation du terme:
rang,
variante nationale:
unité de traitement, CA
catégorie grammaticale:
quantifier, verbe
électronique, f
électronique, adj
---------------------- Page: 13 ----------------------
– XII – IEC 60050-904:2014 © IEC 2014
Source

Dans certains cas, il a été nécessaire d’inclure dans une partie de l'IEV un concept pris dans

une autre partie de l'IEV, ou dans un autre document de terminologie faisant autorité

(Guide ISO/IEC 99, ISO/IEC 2382, etc.), avec ou sans modification de la définition (ou

éventuellement du terme).

Ceci est indiqué par la mention de cette source, imprimée en maigre et placée à la fin de

l’article dans chacune des langues principales de l'IEV présentes.
EXEMPLE SOURCE: IEC 60050-131:2002, 131-03-13, modifié
Termes dans les langues additionnelles de l'IEV

Ces termes sont placés à la fin des articles dans les langues principales de l'IEV, sur des

lignes séparées (une ligne par langue), précédés par le code alpha-2 de la langue, défini

dans l'ISO 639-1, et dans l'ordre alphabétique de ce code.
---------------------- Page: 14 ----------------------
– 1 – IEC 60050-904:2014 © IEC 2014
INTERNATIONAL ELECTROTECHNICAL VOCABULARY –
Part 904: Environmental standardization for electrical and electronic
products and systems
1 Scope

This part of IEC 60050 gives the general terminology used in environmental standardization

for electrical and electronic products and systems. It has the status of a horizontal standard in

accordance with IEC Guide 108, Guidelines for ensuring the coherency of IEC publications –

Application of horizontal standards.

This terminology is consistent with the terminology developed in the other specialized parts of

the IEV.

This horizontal standard is primarily intended for use by technical committees in the

preparation of standards in accordance with the principles laid down in IEC Guide 108.

One of the responsibilities of a technical committee is, wherever applicable, to make use of

horizontal standards in the preparation of its publications. The content of this horizontal

standard will not apply unless specifically referred to or included in the relevant publications.

2 Terms and definitions

The terms and definitions contained in this part of IEC 60050 were extracted from the

Electropedia (www.electropedia.org) (also known as the "IEV Online") – the world's most

comprehensive online terminology database covering the field of electrotechnology,

electronics and telecommunication.
---------------------- Page: 15 ----------------------
IEC 60050-904:2014 © IEC 2014 – 2 –
VOCABULAIRE ÉLECTROTECHNIQUE INTERNATIONAL –
Partie 904: Normalisation environnementale pour les produits et les
systèmes électriques et électroniques
1 Domaine d’application

Cette partie de l'IEC 60050 donne la terminologie générale utilisée dans le domaine de

l’appréciation de la normalisation environnementale pour les produits et les systèmes

électriques et électroniques. Elle a le statut de norme horizontale conformément au

Guide IEC 108, Lignes directrices pour assurer la cohérence des publications de l’IEC –

Application des normes horizontales.

Cette terminologie est en accord avec la terminologie figurant dans les autres parties

spécialisées de l'IEV.

La présente norme horizontale est essentiellement destinée à l'usage des comités d'études

dans la préparation des normes, conformément aux principes établis dans le Guide IEC 108.

L'une des responsabilités d'un comité d'études est d'utiliser, autant que possible, les normes

horizontales lors de la préparation de ses publications. Le contenu de la présente norme

horizontale ne s'appliquera pas, à moins qu'il ne soit spécifiquement cité ou inclus, dans les

publications concernées.
2 Termes et définitions

Les termes et définitions contenus dans la présente partie de l’IEC 60050 ont été extraits de

l’Electropedia (www.electropedia.org) (également connu sous le nom "IEV Online") – la base

de données terminologique en ligne la plus complète couvrant le champ de l’électrotechnique,

de l’électronique et des télécommunications.
---------------------- Page: 16 ----------------------
– 3 – IEC 60050-904:2014 © IEC 2014
SECTION 904-01 – GENERAL TERMS RELATING TO ENVIRONMENTAL
PROTECTION AND MANAGEME
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.