SIST EN 13492:2005/A1:2007
(Amendment)Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
2006-07-31:ADC:DOW=DAV+21 months
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe erforderlich sind
Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation dans la construction des sites d'évacuation de résidus liquides, des stations de transfert ou enceintes de confinement secondaire
Geosintetične zapore - Zahtevane lastnosti za uporabo pri konstrukciji odlagališč za tekoče odpadke, prenosnih postaj in drugih zabojnikov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13492:2005/A1:2007
01-januar-2007
*HRVLQWHWLþQH]DSRUH=DKWHYDQHODVWQRVWL]DXSRUDERSULNRQVWUXNFLMLRGODJDOLãþ
]DWHNRþHRGSDGNHSUHQRVQLKSRVWDMLQGUXJLK]DERMQLNRY
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste
disposal sites, transfer stations or secondary containment
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau
von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe erforderlich
sind
Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour
l'utilisation dans la construction des sites d'évacuation de résidus liquides, des stations
de transfert ou enceintes de confinement secondaire
Ta slovenski standard je istoveten z: EN 13492:2004/A1:2006
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
59.080.70 Geotekstilije Geotextiles
SIST EN 13492:2005/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13492:2005/A1:2007
---------------------- Page: 2 ----------------------
SIST EN 13492:2005/A1:2007
EUROPEAN STANDARD
EN 13492:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 59.080.70; 91.100.50
English Version
Geosynthetic barriers - Characteristics required for use in the
construction of liquid waste disposal sites, transfer stations or
secondary containment
Géomembranes, géosynthétiques bentonitiques - Geosynthetische Dichtungsbahnen - Eigenschaften, die für
Caractéristiques requises pour l'utilisation dans la die Anwendung beim Bau von Deponien, Zwischenlagern
construction des sites d'évacuation de résidus liquides, des und Auffangbecken für flüssige Abfallstoffe erforderlich sind
stations de transfert ou enceintes de confinement
secondaire
This amendment A1 modifies the European Standard EN 13492:2004; it was approved by CEN on 12 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13492:2004/A1:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13492:2005/A1:2007
EN 13492:2004/A1:2006 (E)
Foreword
This document (EN 13492:2004/A1:2006) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by IBN.
This Amendment to the European Standard EN 13492:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2007,
and conflicting national standards shall be withdrawn at the latest by February 2007.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
2
---------------------- Page: 4 ----------------------
SIST EN 13492:2005/A1:2007
EN 13492:2004/A1:2006 (E)
List of amendments:
Clause Par, sentence, Current text Proposed modification
table
2 - Add “ISO 527-4, Plastics - Determination of tensile properties - Part 4: Te
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.