SIST ISO 7001:2008
(Main)Graphical symbols – Public information symbols
Graphical symbols – Public information symbols
ISO 7001:2007 specifies graphical symbols for the purposes of public information. It is generally applicable to public information symbols in all locations and all sectors where the public has access.
ISO 7001:2007 specifies the symbol originals that may be scaled for reproduction and application purposes. The symbols may be used in conjunction with text to improve comprehension.
Symboles graphiques — Symboles destinés à l'information du public
L'ISO 7001:2007 spécifie les symboles graphiques destinés à l'information du public. Elle est généralement applicable aux symboles destinés à l'information du public installés dans tous les lieux et secteurs d'accès public.
L'ISO 7001:2007 spécifie les originaux de symboles qui peuvent être dessinés à l'échelle, aux fins de reproduction et d'application. Les symboles peuvent être associés à du texte, pour une meilleure compréhension.
Grafični simboli - Simboli za javno informiranje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2008
*UDILþQLVLPEROL6LPEROL]DMDYQRLQIRUPLUDQMH
Graphical symbols – Public information symbols
Ta slovenski standard je istoveten z:
ICS:
01.080.10 Simboli za javne informacije Public information symbols
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL ISO
STANDARD 7001
Third edition
2007-11-01
Graphical symbols — Public information
symbols
Symboles graphiques — Symboles destinés à l'information du public
Reference number
©
ISO 2007
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 General. 2
4.1 Size. 2
4.2 Text. 2
4.3 Arrows. 2
4.4 Colour and contrast. 4
4.5 Negation. 4
5 Meanings and categorization of public information symbols. 6
5.1 General. 6
5.2 Meaning . 6
5.3 Categorization . 6
6 Standardized public information symbols . 10
Bibliography . 56
Table 1 — Summary of meanings by alphabetical order. 7
Table 2 — Summary of all public information symbols. 11
Table 3 — Public information symbols: Public facilities. 16
Table 4 — Public information symbols: Transport facilities . 33
Table 5 — Public information symbols: Tourism, culture and heritage . 43
Table 6 — Public information symbols: Sporting activities. 47
Table 7 — Public information symbols: Commercial facilities . 48
Table 8 — Public information symbols: Behaviour of the public (excluding safety signs). 53
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7001 was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 1, Public
information symbols.
This third edition cancels and replaces the second edition (ISO 7001:1990), which has been technically
revised. It also incorporates the Amendment ISO 7001:1990/Amd.1:1993.
iv © ISO 2007 – All rights reserved
Introduction
The reason for the publication of this International Standard is the increasing use of non-verbal presentation of
information in buildings and other places, and for services used by the public. Graphical symbols should be
used where text messages might be a barrier to understanding.
Continued growth in international trade, travel and tourism requires a common method of communication and
standardization of public information symbols will help both provider and users, including those with disabilities.
Lack of standardization may lead to confusion.
The use of standardized public information symbols does not replace the need for careful consideration and
application of wayfinding and signing schemes; it is recognized that pubic information symbols will often be
used with text in signing systems. This may aid education and comprehension particularly for new symbols
and those which have less common usage.
ISO 7001 is intended to be used by all Technical Committees within ISO charged with developing specific
public information symbols for their industry, to ensure that there is only one symbol for each meaning. It is
also intended that this International Standard be revised regularly to include public information symbols as
they are standardized by ISO and which conform to the principles for development as developed by
ISO/TC 145/SC 1.
Specific acceptance criteria, procedures and application forms can be found on the ISO/TC 145/SC 1 website,
http://www.iso.org/tc145/sc1.
The public information symbols in this International Standard have been validated by ISO/TC 145/SC 1
according to procedures of standardization current at the time of publication. Future standardization of public
information symbols will be facilitated with suitable evaluation techniques such as the testing outlined in
ISO 9186. Acceptance criteria for public information symbol qualification ought to be such that there is
confidence that a suitable proportion of the intended audience will understand them. Further design criteria will
be added as appropriate and will be approved by ISO/TC 145/SC 1.
Public information symbols given in this International Standard are considered to have achieved a satisfactory
degree of comprehension as established by independent testing or as a result of their use and application at
an international level.
NOTE The public information symbols given in this International Standard can be reproduced as published. However,
it is recognized that there may be particular national characteristics and cultural requirements which may require minor
variations. This is acceptable providing the key elements and design intent of the standardized symbol is not compromised.
INTERNATIONAL STANDARD ISO 7001:2007(E)
Graphical symbols — Public information symbols
1 Scope
This International Standard specifies graphical symbols for the purposes of public information.
This International Standard is generally applicable to public information symbols in all locations and all sectors
where the public has access. However, it is not applicable to safety signs or to those sectors subject to a
regulation which may differ with regard to certain points of this International Standard (for example, traffic
signs on the public highway).
This International Standard specifies the symbol originals that may be scaled for reproduction and application
purposes.
The symbols may be used in conjunction with text to improve comprehension.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs
in workplaces and public areas
ISO 17724, Graphical symbols — Vocabulary
ISO 22727:2007, Graphical symbols — Creation and design of public information symbols — Requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 17724 and the following apply.
3.1
graphical symbol
visually perceptible figure with a particular meaning used to transmit information independently of language
3.2
public information symbol
graphical symbol intended to give information to the general public, the understanding of which is independent
of specialist or occupational training
3.3
safety sign
sign giving a general safety message, obtained by a combination of a colour and geometric shape and which,
by the addition of a graphical symbol, gives a particular safety message
[ISO 7010:2003, 3.7]
3.4
negation
indication of the absence or opposite of something actual or positive
3.5
meaning
message that a public information symbol is intended to convey
3.6
function
written description of the purpose of the information to be conveyed by a graphical symbol
3.7
image content
written description of the elements of a graphical symbol or safety sign and their relative disposition
4 General
4.1 Size
The public information symbols given in this International Standard are designed to be reproduced in a variety
of sizes to suit different applications from, for example, small-scale orientation notices to large-scale
wayfinding signs.
4.2 Text
The graphical symbols have been designed with the intention that they can be used on their own to convey
the information described in the meaning (except the direction arrow, which cannot be used on its own, see
4.3). However, they may be combined with the relevant text on a sign or notice, etc., if considered appropriate.
This might be an advantage with less well established symbols to aid understanding.
4.3 Arrows
The direction arrow (symbol number PI PF 030) shall only be used in conjunction with another symbol (or a
symbol and text) to indicate movement of a person towards something. An example is shown in Figure 1.
2 © ISO 2007 – All rights reserved
Figure 1 — Use of the direction arrow with the relevant symbol to indicate female toilet to the right
The direction arrow shall be used to indicate direction of a person as shown in Figure 2.
Progress to the right
Progress to the left
Progress forward from here
Progress forward and through from here
Progress forward and up from here
Progress up to the right
Progress forward and across to the right
Progress down to the right
Progress up to the left
Progress forward and across to the left
Progress down to the left
Progress down from here
Figure 2 — Use of direction arrows
The use of all other arrows is given with the relevant graphical symbol and meaning.
...
INTERNATIONAL ISO
STANDARD 7001
Third edition
2007-11-01
Graphical symbols — Public information
symbols
Symboles graphiques — Symboles destinés à l'information du public
Reference number
©
ISO 2007
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 General. 2
4.1 Size. 2
4.2 Text. 2
4.3 Arrows. 2
4.4 Colour and contrast. 4
4.5 Negation. 4
5 Meanings and categorization of public information symbols. 6
5.1 General. 6
5.2 Meaning . 6
5.3 Categorization . 6
6 Standardized public information symbols . 10
Bibliography . 56
Table 1 — Summary of meanings by alphabetical order. 7
Table 2 — Summary of all public information symbols. 11
Table 3 — Public information symbols: Public facilities. 16
Table 4 — Public information symbols: Transport facilities . 33
Table 5 — Public information symbols: Tourism, culture and heritage . 43
Table 6 — Public information symbols: Sporting activities. 47
Table 7 — Public information symbols: Commercial facilities . 48
Table 8 — Public information symbols: Behaviour of the public (excluding safety signs). 53
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7001 was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 1, Public
information symbols.
This third edition cancels and replaces the second edition (ISO 7001:1990), which has been technically
revised. It also incorporates the Amendment ISO 7001:1990/Amd.1:1993.
iv © ISO 2007 – All rights reserved
Introduction
The reason for the publication of this International Standard is the increasing use of non-verbal presentation of
information in buildings and other places, and for services used by the public. Graphical symbols should be
used where text messages might be a barrier to understanding.
Continued growth in international trade, travel and tourism requires a common method of communication and
standardization of public information symbols will help both provider and users, including those with disabilities.
Lack of standardization may lead to confusion.
The use of standardized public information symbols does not replace the need for careful consideration and
application of wayfinding and signing schemes; it is recognized that pubic information symbols will often be
used with text in signing systems. This may aid education and comprehension particularly for new symbols
and those which have less common usage.
ISO 7001 is intended to be used by all Technical Committees within ISO charged with developing specific
public information symbols for their industry, to ensure that there is only one symbol for each meaning. It is
also intended that this International Standard be revised regularly to include public information symbols as
they are standardized by ISO and which conform to the principles for development as developed by
ISO/TC 145/SC 1.
Specific acceptance criteria, procedures and application forms can be found on the ISO/TC 145/SC 1 website,
http://www.iso.org/tc145/sc1.
The public information symbols in this International Standard have been validated by ISO/TC 145/SC 1
according to procedures of standardization current at the time of publication. Future standardization of public
information symbols will be facilitated with suitable evaluation techniques such as the testing outlined in
ISO 9186. Acceptance criteria for public information symbol qualification ought to be such that there is
confidence that a suitable proportion of the intended audience will understand them. Further design criteria will
be added as appropriate and will be approved by ISO/TC 145/SC 1.
Public information symbols given in this International Standard are considered to have achieved a satisfactory
degree of comprehension as established by independent testing or as a result of their use and application at
an international level.
NOTE The public information symbols given in this International Standard can be reproduced as published. However,
it is recognized that there may be particular national characteristics and cultural requirements which may require minor
variations. This is acceptable providing the key elements and design intent of the standardized symbol is not compromised.
INTERNATIONAL STANDARD ISO 7001:2007(E)
Graphical symbols — Public information symbols
1 Scope
This International Standard specifies graphical symbols for the purposes of public information.
This International Standard is generally applicable to public information symbols in all locations and all sectors
where the public has access. However, it is not applicable to safety signs or to those sectors subject to a
regulation which may differ with regard to certain points of this International Standard (for example, traffic
signs on the public highway).
This International Standard specifies the symbol originals that may be scaled for reproduction and application
purposes.
The symbols may be used in conjunction with text to improve comprehension.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs
in workplaces and public areas
ISO 17724, Graphical symbols — Vocabulary
ISO 22727:2007, Graphical symbols — Creation and design of public information symbols — Requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 17724 and the following apply.
3.1
graphical symbol
visually perceptible figure with a particular meaning used to transmit information independently of language
3.2
public information symbol
graphical symbol intended to give information to the general public, the understanding of which is independent
of specialist or occupational training
3.3
safety sign
sign giving a general safety message, obtained by a combination of a colour and geometric shape and which,
by the addition of a graphical symbol, gives a particular safety message
[ISO 7010:2003, 3.7]
3.4
negation
indication of the absence or opposite of something actual or positive
3.5
meaning
message that a public information symbol is intended to convey
3.6
function
written description of the purpose of the information to be conveyed by a graphical symbol
3.7
image content
written description of the elements of a graphical symbol or safety sign and their relative disposition
4 General
4.1 Size
The public information symbols given in this International Standard are designed to be reproduced in a variety
of sizes to suit different applications from, for example, small-scale orientation notices to large-scale
wayfinding signs.
4.2 Text
The graphical symbols have been designed with the intention that they can be used on their own to convey
the information described in the meaning (except the direction arrow, which cannot be used on its own, see
4.3). However, they may be combined with the relevant text on a sign or notice, etc., if considered appropriate.
This might be an advantage with less well established symbols to aid understanding.
4.3 Arrows
The direction arrow (symbol number PI PF 030) shall only be used in conjunction with another symbol (or a
symbol and text) to indicate movement of a person towards something. An example is shown in Figure 1.
2 © ISO 2007 – All rights reserved
Figure 1 — Use of the direction arrow with the relevant symbol to indicate female toilet to the right
The direction arrow shall be used to indicate direction of a person as shown in Figure 2.
Progress to the right
Progress to the left
Progress forward from here
Progress forward and through from here
Progress forward and up from here
Progress up to the right
Progress forward and across to the right
Progress down to the right
Progress up to the left
Progress forward and across to the left
Progress down to the left
Progress down from here
Figure 2 — Use of direction arrows
The use of all other arrows is given with the relevant graphical symbol and meaning.
4.4 Colour and contrast
The public information symbols given in this International Standard may be reproduced in any colour.
However, the combination of safety colours and shapes specified in ISO 3864-1 shall be avoided to ensure
there is no confusion between public information symbols and safety signs. This also applies to arrows where
the use of green and white shall be avoided to ensure that there is no confusion with
...
NORME ISO
INTERNATIONALE 7001
Troisième édition
2007-11-01
Symboles graphiques — Symboles
destinés à l'information du public
Graphical symbols — Public information symbols
Numéro de référence
©
ISO 2007
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2007
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2007 – Tous droits réservés
Sommaire Page
Avant-propos. iv
Introduction . v
1 Domaine d'application. 1
2 Références normatives . 1
3 Termes et définitions. 1
4 Généralités . 2
4.1 Dimensions. 2
4.2 Texte. 2
4.3 Flèches. 2
4.4 Couleur et contraste. 4
4.5 Négation. 4
5 Significations et classification par catégories des symboles destinés à l’information du
public. 6
5.1 Généralités . 6
5.2 Signification . 6
5.3 Classification par catégories. 6
6 Symboles normalisés destinés à l’information du public . 10
Bibliographie . 56
Tableau 1 — Résumé des significations par ordre alphabétique. 7
Tableau 2 — Résumé de tous les symboles destinés à l’information du public . 11
Tableau 3 — Symboles destinés à l’information du public: Installations publiques . 16
Tableau 4 — Symboles destinés à l’information du public: Moyens de transport . 33
Tableau 5 — Symboles destinés à l’information du public: Tourisme, culture et patrimoine. 43
Tableau 6 — Symboles destinés à l’information du public: Activités sportives. 47
Tableau 7 — Symboles destinés à l’information du public: Établissements commerciaux. 48
Tableau 8 — Symboles destinés à l’information du public: Comportement du public (à l’exclusion
des signaux de sécurité) . 53
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 7001 a été élaborée par le comité technique ISO/TC 145, Symboles graphiques et pictogrammes,
sous-comité SC 1, Symboles pour l'information du public (pictogrammes).
Cette troisième édition annule et remplace la deuxième édition (ISO 7001:1990), dont elle constitue une
révision technique. Elle incorpore également l’amendement ISO 7001:1990/Amd.1:1993.
iv © ISO 2007 – Tous droits réservés
Introduction
La publication de la présente Norme internationale tire sa justification du fait que l’on voit de plus en plus,
dans les bâtiments et autres lieux et services ouverts au public, des informations données sous une forme qui
ne recourt plus au texte. Il convient d’utiliser des symboles graphiques là où le recours au texte risque de
constituer un obstacle à la compréhension du message.
Le développement continu du commerce international, des transports et du tourisme rend indispensable
l’instauration d’une méthode commune de communication; la normalisation des symboles destinés à
l’information du public sera utile tant aux fournisseurs d’informations qu’aux utilisateurs, y compris les
personnes handicapées.
Le manque de normalisation peut être source de confusion.
L’utilisation de symboles normalisés destinés à l’information du public ne dispense en aucun cas de mettre au
point de manière attentive des systèmes de signalisation et d’orientation; il est reconnu que les symboles
destinés à l’information du public sont souvent associés à du texte. L’utilisation de symboles normalisés peut
faciliter la compréhension, en particulier lorsqu’il s’agit de symboles nouveaux ou peu utilisés.
L’ISO 7001 est destinée à être utilisée par tous les comités techniques de l’ISO chargés d’élaborer des
symboles destinés à l’information du public spécifiques à leur secteur d’activité, afin de garantir qu’à chaque
signification ne correspond qu’un seul symbole. Il est également prévu de réviser régulièrement la présente
Norme internationale pour y inclure les symboles destinés à l’information du public normalisés au sein de
l’ISO et qui sont conformes aux principes d’élaboration mis en œuvre par l’ISO/TC 145/SC 1.
Les critères d’acceptation spécifiques, modes opératoires et formulaires de demande se trouvent sur le site
Web de l’ISO/TC 145/SC1, http://www.iso.org/tc145/sc1.
Les symboles destinés à l’information du public contenus dans la présente Norme internationale ont été
validés par l’ISO/TC 145/SC 1 conformément aux procédures de normalisation applicables au moment de la
publication. Dans l’avenir, la normalisation des symboles destinés à l’information du public peut être facilitée
par l’application de techniques d’évaluation appropriées, comme celle décrite dans l’ISO 9186. Il convient que
les critères d’acceptation pour la qualification des symboles destinés à l’information du public soient choisis en
ayant la garantie que les signaux soient compris par une proportion appropriée du public visé. D’autres
critères de conception seront ajoutés, le cas échéant, et seront approuvés par l’ISO/TC 145/SC 1.
Les symboles destinés à l’information du public contenus dans la présente Norme internationale sont
considérés comme ayant obtenu un degré satisfaisant de compréhension, attestée par des essais
indépendants ou comme résultat de leur utilisation et de leur application au niveau international.
NOTE Les symboles destinés à l’information du public présentés dans la présente Norme internationale peuvent être
reproduits tels quels. Cependant, ils sont susceptibles de faire l’objet de variations mineures en raison de particularités
nationales ou culturelles. Cela est acceptable tant que les éléments-clés et le modèle de conception du symbole
normalisé sont respectés.
NORME INTERNATIONALE ISO 7001:2007(F)
Symboles graphiques — Symboles destinés à l'information du
public
1 Domaine d'application
La présente Norme internationale spécifie les symboles graphiques destinés à l’information du public.
La présente Norme internationale est généralement applicable aux symboles destinés à l’information du
public installés dans tous les lieux et secteurs d’accès public. Cependant, elle n’est pas applicable aux
signaux de sécurité ou aux secteurs soumis à une réglementation qui peut être différente pour ce qui
concerne certains points de la présente Norme internationale (par exemple les panneaux de signalisation sur
la voie publique).
La présente Norme internationale spécifie les originaux de symboles qui peuvent être dessinés à l’échelle,
aux fins de reproduction et d’application.
Les symboles peuvent être associés à du texte, pour une meilleure compréhension.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 3864-1, Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 1: Principes de
conception pour les signaux de sécurité sur les lieux de travail et dans les lieux publics
ISO 17724, Symboles graphiques — Vocabulaire
ISO 22727:2007, Symboles graphiques — Création et conception des symboles destinés à l'information du
public — Exigences
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l’ISO 17724 ainsi que les
suivants s'appliquent.
3.1
symbole graphique
figure visuellement perceptible ayant une signification particulière et utilisée pour transmettre des informations
indépendamment de la langue
3.2
symbole destiné à l’information du public
symbole graphique conçu pour fournir une information au grand public et dont la compréhension ne dépend
pas de connaissances relevant de spécialistes ou de professionnels
3.3
signal de sécurité
signal qui, par la combinaison d’une forme géométrique et d’une couleur, fournit une indication d’ordre général
se rapportant à la sécurité et qui, par l’ajout d’un symbole graphique, exprime un message particulier relatif à
la sécurité
[ISO 7010:2003, 3.7]
3.4
négation
indication de l’absence ou du contraire
3.5
signification
message qu’un symbole destiné à l’information du public a pour objet de transmettre
3.6
fonction
description écrite de l’objet de l’information transmise par un symbole graphique
3.7
contenu graphique
description écrite des éléments d’un symbole graphique ou d’un signal de sécurité et de leurs dispositions
respectives
4 Généralités
4.1 Dimensions
Les symboles destinés à l’information du public contenus dans la présente Norme internationale sont conçus
pour être reproduits à différentes dimensions en fonction des applications, selon qu’il s’agit, par exemple,
d’indications d’orientation à échelle réduite ou de signaux à grande échelle.
4.2 Texte
Les symboles graphiques ont été conçus pour transmettre par eux-mêmes l’information dont ils sont porteurs
(à l’exception de la flèche de direction, qui ne se suffit pas à elle-même, voir 4.3). Cependant, ils peuvent, le
cas échéant, être combinés avec un texte pertinent, par exemple sur un signal ou une indicati
...
МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 7001
Третье издание
2007-11-01
Графические символы.
Информационные символы для
общественных мест
Graphical symbols – Public information symbols
Ответственность за подготовку русской версии несёт GOST R
(Российская Федерация) в соответствии со статьёй 18.1 Устава ISO
Ссылочный номер
©
ISO 2007
Отказ от ответственности при работе в PDF
Настоящий файл PDF может содержать интегрированные шрифты. В соответствии с условиями лицензирования, принятыми
фирмой Adobe, этот файл можно распечатать или вывести на экран, но его нельзя изменить, пока не будет получена
лицензия на загрузку интегрированных шрифтов в компьютер, на котором ведется редактирование. В случае загрузки
настоящего файла заинтересованные стороны принимают на себя ответственность за соблюдение лицензионных условий
фирмы Adobe. Центральный секретариат ISO не несет никакой ответственности в этом отношении.
Adobe − торговый знак фирмы Adobe Systems Incorporated.
Подробности, относящиеся к программным продуктам, использованным для создания настоящего файла PDF, можно найти в
рубрике General Info файла; параметры создания PDF были оптимизированы для печати. Были приняты во внимание все
меры предосторожности с тем, чтобы обеспечить пригодность настоящего файла для использования комитетами-членами
ISO. В редких случаях возникновения проблемы, связанной со сказанным выше, просьба проинформировать Центральный
секретариат по адресу, приведенному ниже.
ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ
© ISO 2007
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия ISO по адресу, указанному ниже, или членов ISO в стране регистрации пребывания.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии
ii ISO 2007 – Все права сохраняются
Содержание Страница
Предисловие .iv
Введение .v
1 Область применения .1
2 Нормативные ссылки .1
3 Термины и определения .1
4 Общая часть .2
4.1 Размеры.2
4.2 Текст.2
4.3 Стрелки.2
4.4 Цвет и контраст.4
4.5 Отрицание .4
5 Значения и категоризация информационных символов для общественных мест.6
5.1 Общие положения .6
5.2 Значение.6
5.3 Категоризация .6
6 Стандартизированные информационные символы для общественных мест.10
Библиография.58
Таблица 1 − Сводка значений в алфавитном порядке.7
Таблица 2 − Сводная таблица всех информационных символов для общественных мест .11
Таблица 3 − Информационные символы для общественных мест. Объекты и
коммуникации общественного пользования .18
Таблица 4 − Информационные символы для общественных мест. Транспортные средства .35
Таблица 5 − Информационные символы для общественных мест. Туризм, культура и
наследие .45
Таблица 6 − Информационные символы для общественных мест. Занятия спортом .49
Таблица 7 − Информационные символы для общественных мест. Торговые предприятия.50
Таблица 8 − Информационные символы для общественных мест. Поведение людей
(исключая предупредительные знаки).55
ISO 2007 – Все права сохраняются iii
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией национальных
организаций по стандартизации (комитетов-членов ISO). Разработка международных стандартов
обычно осуществляется техническими комитетами ISO. Каждый комитет-член, заинтересованный в
деятельности, для которой был создан технический комитет, имеет право быть представленным в этом
комитете. Международные правительственные и неправительственные организации, имеющие связи с
ISO, также принимают участие в работах. ISO работает в тесном сотрудничестве с Международной
электротехнической комиссией (IEC) по всем вопросам стандартизации в области электротехники.
Международные стандарты разрабатываются в соответствии с правилами, установленными в
Директивах ISO/IEC, Часть 2.
Основная задача технических комитетов состоит в подготовке международных стандартов. Проекты
международных стандартов, одобренные техническими комитетами, рассылаются комитетам-членам
на голосование. Их опубликование в качестве международных стандартов требует одобрения, по
меньшей мере, 75 % комитетов-членов, принимающих участие в голосовании.
Следует иметь в виду, что некоторые элементы этого документа могут быть объектом патентных прав.
ISO не должен нести ответственность за идентификацию какого-либо одного или всех патентных прав.
ISO 7001 подготовлен Техническим комитетом ISO/TC 145, Графические символы, Подкомитетом SC 1,
Информационные символы для общественных мест.
Настоящее третье издание отменяет и заменяет второе издание (ISO 7001:1990), которое было
технически пересмотрено. Оно также включает Изменение ISO 7001:1990/Amd.1:1993.
iv ISO 2007 – Все права сохраняются
Введение
Причиной публикации настоящего международного стандарта является возрастающее использование
невербального представления информации в зданиях и других местах, а также по услугам,
предоставляемым населению. Графические символы должны использоваться в тех случаях, когда
текстовые сообщения могут оказаться трудными для понимания.
Непрерывное развитие международной торговли, путешествий и туризма требует разработки общего
метода передачи информации, и стандартизация информационных символов для общественных мест
может помочь как провайдерам, так и пользователям, включая лиц с ограниченными возможностями.
Отсутствие стандартизации может приводить к путанице.
Использование стандартизованных информационных символов для общественных мест не отменяет
необходимость тщательного рассмотрения и применения схем определения маршрутов и схем
дорожных знаков и указателей. Признано, что информационные символы для общественных мест
могут часто использоваться вместе с текстом в системах дорожных знаков и указателей. Это может
помочь обучению и пониманию символов, в частности, в случае новых символов и символов, которые
не нашли широкого применения.
ISO 7001 предназначается для использования всеми Техническими комитетами ISO, на которые
возлагается ответственность за разработку отдельных общедоступных информационных символов
для их отраслей производства так, чтобы каждому значению соответствовал только один символ.
Также подразумевается, что настоящий международный стандарт должен регулярно
пересматриваться для включения информационных символов для общественных мест,
соответствующих принципам разработки символов, установленных ISO/TC 145/SC 1, по мере того, как
они стандартизируются ISO.
Отдельные критерии приемки, процедуры и заявочные бланки можно найти на веб-сайте
ISO/TC 145/SC 1, http://www.iso.org/tc145/sc1.
Информационные символы для общественных мест в настоящем международном стандарте были
валидированы ISO/TC 145/SC 1 в соответствии с процедурами стандартизации, действующими на
время публикации. Будущая стандартизация информационных символов для общественных мест
может быть облегчена с использованием соответствующих методов оценивания, например, испытаний,
описанных в ISO 9186. Критерии приемки квалификации информационных символов для
общественных мест должны быть такими, чтобы соответствующая часть избранной аудитории
понимала их. Дополнительные критерии проектирования символов при необходимости будут
добавлены и утверждены ISO/TC 145/SC 1.
Считается, что информационные символы для общественных мест, представленные в настоящем
международном стандарте, обеспечивают достаточное понимание, как установлено независимыми
испытаниями или результатами их использования и применения на международном уровне.
ПРИМЕЧАНИЕ Информационные символы для общественных мест, представленные в настоящем
международном стандарте, могут быть воспроизведены после публикации. Однако признано, что могут
существовать отдельные национальные характеристики и культурные потребности, что может привести к
необходимости внесения небольших изменений. Это является приемлемым при условии, что концепция основных
элементов и проектирования стандартизированных символов не компрометируется.
ISO 2007 – Все права сохраняются v
МЕЖДУНАРОДНЫЙ СТАНДАРТ ISO 7001:2007(R)
Графические символы. Информационные символы для
общественных мест
1 Область применения
Настоящий международный стандарт устанавливает графические символы с целью предоставления
общедоступной информации.
Данный международный стандарт в целом распространяется на информационные символы для
общественных мест, устанавливаемые во всех местах и во всех секторах, к которым имеет доступ
население. Однако он не распространяется на предупредительные знаки или на сектора,
подчиняющиеся правилам, которые могут отличаться в отношении некоторых пунктов настоящего
международного стандарта (например, дорожные знаки на шоссе общего пользования).
Настоящий международный стандарт устанавливает оригиналы символов, которые могут
масштабироваться для воспроизведения и применения.
Символы могут использоваться вместе с текстом для улучшения их понимания.
2 Нормативные ссылки
Следующие ссылочные нормативные документы являются обязательными при применении данного
документа. Для жестких ссылок применяется только цитированное издание документа. Для плавающих
ссылок необходимо использовать самое последнее издание нормативного ссылочного документа
(включая любые изменения).
ISO 3864-1, Символы графические. Цвета безопасности и предупредительные знаки. Часть 1. Принципы
проектирования предупредительных знаков на рабочих местах и в общественных местах
ISO 17724, Символы графические. Словарь
ISO 22727:2007, Графические символы. Разработка и дизайн информационных символов для
общественных мест. Требования
3 Термины и определения
Для целей настоящего документа используются термины и определения, установленные в ISO 17724,
а также следующие термины и определения.
3.1
графический символ
graphical symbol
визуально воспринимаемый рисунок с определенным значением, используемый для передачи
информации независимо от языка
3.2
информационный символ для общественных мест
public information symbol
графический символ, предназначаемый для передачи информации неограниченному кругу лиц,
ISO 2007 – Все права сохраняются 1
понимание которого не зависит от того, являются ли они специалистами или имеют
профессиональную подготовку
3.3
предупредительный знак
safety sign
знак, представляющий общее предупреждающее сообщение, полученный путем комбинации цвета и
геометрической формы, который при добавлении графического символа представляет конкретное
предупреждающее сообщение
[ISO 7010:2003, 3.7]
3.4
отрицание
negation
указание отсутствия или противоположности чего-то существующего или позитивного
3.5
значение
meaning
сообщение, что символ для общественных мест предназначается для передачи определенной
информации
3.6
функция
function
письменное описание назначения информации, передаваемой графическим символом
3.7
содержание изображения
image content
письменное описание элементов графических символов или предупредительных знаков и их
относительное расположение
4 Общая часть
4.1 Размеры
Информационные символы для общественных мест, установленные в настоящем международном
стандарте, разрабатываются для воспроизведения в разных масштабах, соответствующих разным
применениям, например, начиная с мелкомасштабных предупреждений о направлении и кончая
крупномасштабными знаками, определяющими маршрут.
4.2 Текст
Графические символы были разработаны с тем, чтобы они могли использоваться сами по себе для
передачи информации, описанной в значении (за исключением стрелок направления, которые не могут
использоваться сами по себе, см. 4.3). Однако они могут объединяться с соответствующим текстом на
знаке или предупреждении, если это считается необходимым. Такое объединение с менее
распространенными символами помогает их пониманию.
4.3 Ст
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.