SIST EN ISO/IEEE 11073-20601:2023
(Main)Health informatics - Device interoperability - Part 20601: Personal health device communication - Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2022)
Health informatics - Device interoperability - Part 20601: Personal health device communication - Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2022)
Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard defines a common framework for making an abstract model of personal health data available in transport-independent transfer syntax required to establish logical connections between systems and to provide presentation capabilities and services needed to perform communication tasks. The protocol is optimized to personal health usage requirements and leverages commonly used methods and tools wherever possible.
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE 11073-20601:2022)
Informatique de santé - Interopérabilité des dispositifs - Partie 20601: Communication entre dispositifs de santé personnels - Profil d'application - Protocole d'échange optimisé (ISO/IEEE 11073-20601:2022)
Dans le contexte de la famille de norme ISO/IEEE 11073 relative à la communication entre dispositifs, la présente norme définit un cadre commun pour mettre à disposition un modèle abstrait de données relatives à la santé personnelle dans une syntaxe de transfert indépendante du transport requise aux fins d'établir des connexions logiques entre systèmes et de fournir des capacités et des services de présentation nécessaires pour effectuer les tâches de communication. Le protocole est optimisé pour répondre aux exigences des utilisations relatives à la santé des personnes et s'appuie dans la mesure du possible sur des méthodes et des outils couramment utilisés.
Zdravstvena informatika - Interoperabilnost naprav - 20601. del: Komunikacija osebnih medicinskih naprav - Profil aplikacije - Optimalni protokol izmenjave podatkov (ISO/IEEE 11073-20601:2022)
Ta standard v okviru skupine standardov ISO/IEEE 11073 za komunikacijo naprav določa skupni okvir za abstraktni model osebnih zdravstvenih podatkov, razpoložljivih v okviru prenosne sintakse, ki je neodvisna od oblike prenosa in potrebna za vzpostavljanje logičnih povezav med sistemi ter za zagotavljanje predstavitvenih zmožnosti in storitev, ključnih za izvajanje komunikacijskih opravil. Protokol je optimiziran glede na zahteve glede uporabe osebnih zdravstvenih podatkov ter poenostavlja običajno uporabljane metode in orodja, kjer je to mogoče.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/IEEE 11073-20601:2023
01-maj-2023
Nadomešča:
SIST EN ISO 11073-20601:2017
Zdravstvena informatika - Interoperabilnost naprav - 20601. del: Komunikacija
osebnih medicinskih naprav - Profil aplikacije - Optimalni protokol izmenjave
podatkov (ISO/IEEE 11073-20601:2022)
Health informatics - Device interoperability - Part 20601: Personal health device
communication - Application profile - Optimized exchange protocol (ISO/IEEE 11073-
20601:2022)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE
11073-20601:2022)
Informatique de santé - Interopérabilité des dispositifs - Partie 20601: Communication
entre dispositifs de santé personnels - Profil d'application - Protocole d'échange optimisé
(ISO/IEEE 11073-20601:2022)
Ta slovenski standard je istoveten z: EN ISO/IEEE 11073-20601:2022
ICS:
11.040.99 Druga medicinska oprema Other medical equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO/IEEE 11073-20601:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
---------------------- Page: 2 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
EN ISO/IEEE 11073-
EUROPEAN STANDARD
20601
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2022
ICS 35.240.80 Supersedes EN ISO 11073-20601:2016
English Version
Health informatics - Device interoperability - Part 20601:
Personal health device communication - Application
profile - Optimized exchange protocol (ISO/IEEE 11073-
20601:2022)
Informatique de santé - Interopérabilité des dispositifs Medizinische Informatik - Kommunikation von Geräten
- Partie 20601: Communication entre dispositifs de für die persönliche Gesundheit - Teil 20601:
santé personnels - Profil d'application - Protocole Anwendungsprofil - Optimiertes
d'échange optimisé (ISO/IEEE 11073-20601:2022) Datenübertragungsprotokoll (ISO/IEEE 11073-
20601:2022)
This European Standard was approved by CEN on 4 December 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEEE 11073-20601:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
EN ISO/IEEE 11073-20601:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
EN ISO/IEEE 11073-20601:2022 (E)
European foreword
This document (EN ISO/IEEE 11073-20601:2022) has been prepared by Technical Committee ISO/TC
215 "Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics”
the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11073-20601:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-20601:2022 has been approved by CEN as EN ISO/IEEE 11073-
20601:2022 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
---------------------- Page: 6 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
INTERNATIONAL ISO/IEEE
STANDARD 11073-20601
Third edition
2022-12
Health informatics — Device
interoperability —
Part 20601:
Personal health device communication
— Application profile — Optimized
exchange protocol
Informatique de santé — Interopérabilité des dispositifs —
Partie 20601: Communication entre dispositifs de santé personnels —
Profil d'application — Protocole d'échange optimisé
Reference number
ISO/IEEE 11073-20601:2022(E)
© IEEE 2019
---------------------- Page: 7 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
© IEEE 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-20601 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-20601-2019) and drafted in accordance with its editorial
rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development
Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health
informatics.
This third edition cancels and replaces the second edition (ISO/IEEE 11073-20601:2016), which has
been technically revised. It also incorporates the Technical Corrigendum ISO/IEEE 11073-
20601:2016/Cor 1:2016.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
---------------------- Page: 10 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
IEEE Std 11073-20601™-2019
(Revision of IEEE Std 11073-20601-2014)
Health informatics—Personal health device communication
Part 20601: Application profile—
Optimized Exchange Protocol
Developed by the
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 5 September 2019
IEEE SA Standards Board
---------------------- Page: 11 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, a common framework for making an abstract model of personal health data
available in transport-independent transfer syntax required to establish logical connections
between systems and to provide presentation capabilities and services needed to perform
communication tasks is described in this standard. The protocol is optimized to personal health
usage requirements and leverages commonly used methods and tools wherever possible.
Keywords: IEEE 11073-20601™, medical device communication, personal health devices
•
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2019 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 20 December 2019. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-6379-9 STD24014
Print: ISBN 978-1-5044-6380-5 STD24014
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
4
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 14 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at http://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at http://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
5
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 15 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Participants
At the time this standard was completed, the Personal Health Devices Working Group had the following
membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Karsten Aalders Wenjuan Chen Rick Geimer
Charles R. Abbruscato James Cheng Igor Gejdos
Nabil Abujbara Ferenc Gerbovics
Peggy Chien
Maher Abuzaid Alan Godfrey
David Chiu
James Agnew
Jinyong Choi Nicolae Goga
Haidar Ahmad Chia-Chin Chong Julian Goldman
Manfred Aigner Saeed A. Choudhary Raul Gonzalez Gomez
Jorge Alberola Jinhan Chung Chris Gough
Rolf Ambuehl John A. Cogan Channa Gowda
David Aparisi John T. Collins Charles M. Gropper
Lawrence Arne Cory Condek Amit Gupta
Diego B. Arquillo Todd H. Cooper Jeff Guttmacher
Serafin Arroyo David Cornejo Rasmus Haahr
Muhammad Asim Douglas Coup Christian Habermann
Kit August Nigel Cox Michael Hagerty
Doug Baird Hans Crommenacker Jerry Hahn
David Baker Tomio Crosley Robert Hall
Anindya Bakshi Allen Curtis Shu Han
Ananth Balasubramanian Eyal Dassau Nathaniel Hamming
Sunlee Bang Rickey L. Hampton
David Davenport
M. Jonathan Barkley
Russell Davis Sten Hanke
Gilberto Barrón Sushil K. Deka Aki Harma
David Bean Ciro de la Vega Jordan Hartmann
John Bell Pedro de-las-Heras-Quiros Kai Hassing
Rudy Belliardi Jim Dello Stritto Wolfgang Heck
Kathryn M. Bennett Matthew d’Entremont Nathaniel Heintzman
Daniel Bernstein Kent Dicks Charles Henderson
George A. Bertos Hyoungho Do Jun-Ho Her
Chris Biernacki Alistair Donaldson Helen B. Hernandez
Ola Björsne Xiaolian Duan Takashi Hibino
Thomas Blackadar Brian Dubreuil Timothy L. Hirou
Marc Blanchet Sourav Dutta Allen Hobbs
Thomas Bluethner Jakob Ehrensvard Alex Holland
Douglas P. Bogia Fredrik Einberg Arto Holopainen
Xavier Boniface Michihiro Enokida Kris Holtzclaw
Shannon Boucousis Javier Escayola Calvo Xinyi Hong
Julius Broma Mark Estes Robert Hoy
Leonardo Estevez
Lyle G. Bullock, Jr. Frank Hsu
Hailing Feng
Bernard Burg Anne Huang
Chris Burns Bosco T. Fernandes Sen-Der Huang
Anthony Butt Christoph Fischer Zhiyong Huang
Jeremy Byford-Rew Morten Flintrup Ron Huby
Satya Calloji Joseph W. Forler David Hughes
Xiaoying Cao Russell Foster Robert D. Hughes
Carole C. Carey Eric Freudenthal Jiyoung Huh
Craig Carlson Matthias Frohner Hugh Hunter
Santiago Carot-Nemesio Ken Fuchs Hitoshi Ikeda
Randy W. Carroll Jing Gao Yutaka Ikeda
Simon Carter Qi Gao Philip O. Isaacson
Seungchul Chae Marcus Garbe Atsushi Ito
Rahul Chauhan John Garguilo Michael Jaffe
6
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 16 ----------------------
SIST EN ISO/IEEE 11073-20601:2023
ISO/IEEE 11073-20601:2022(E)
Praduman Jain Jim McCain Jose A. Santos-Cadenas
Danny Jochelson Stefan Sauermann
László Meleg
Phaneeth Junga John Sawyer
Alexander Mense
Akiyoshi Kabe Behnaz Minaei Guillaume Schatz
Steve Kahle Jinsei Miyazaki Alois Schloegl
Tomio Kamioka Erik Moll Paul S. Schluter
James J. Kang Darr Moore Lars Schmitt
Kei Kariya Carsten Mueglitz Mark G. Schnell
Andy Kaschl Piotr Murawski Richard A. Schrenker
Junzo Kashihara Soundharya Nagasubramanian Antonio Scorpiniti
Kohichi Kashiwagi Jae-Wook Nah KwangSeok Seo
Ralph Kent Alex Neefus Riccardo Serafin
Laurie M. Kermes Trong-Nghia Nguyen-Dobinsky Sid Shaw
Ikuo Keshi Michael E. Nidd Frank Shen
Ahmad Kheirandish Jim Niswander Min Shih
Junhyung Kim Hongliang Niu Mazen Shihabi
Minho Kim Hiroaki Niwamoto Redmond Shouldice
Min-Joon Kim Sternly K. Simon
Thomas Norgall
Taekon Kim Marjorie Skubic
Anand Noubade
Tetsuya Kimura
Yoshiteru Nozoe Robert Smith
Alfred Kloos Abraham Ofek Ivan Soh
Jeongmee Koh Brett Olive Motoki Sone
Jean-Marc Koller Begonya Otal Emily Sopensky
John Koon Marco Paleari Rajagopalan Srinivasan
Patty Krantz Bud Panjwani Nicholas Steblay
Raymond Krasinski Carl Pantiskas Lars Steubesand
Alexander Kraus Harry P. Pappas John (Ivo) Stivoric
Ramesh Krishna Hanna Park Raymond A. Strickland
Geoffrey Kruse Jong-Tae Park Chandrasekaran Subramaniam
Falko Kuester Myungeun Park Hermanni Suominen
Rafael Lajara Soojun Park Lee Surprenant
Pierre Landau Phillip E. Pash Ravi Swami
Jaechul Lee TongBi Pei Ray Sweidan
JongMuk Lee Lucian Pestritu Yi Tang
Kyong Ho Lee Soren Petersen Haruyuyki Tatsumi
Rami Lee James Petisce
Isabel Tejero
Peter Piction
Sungkee Lee John W. Thomas
Michael Pliskin
Woojae Lee Tom Thompson
Yonghee Lee Varshney Prabodh Jonas Tirén
Joe Lenart Jeff Price Alexandra Todiruta
Kathryn A. Lesh Harald Prinzhorn Janet Traub
Qiong Li Harry Qiu Jesús Daniel Trigo
Xiangchen Li Arif Rahman Gary Tschautscher
Yingsong Li Tanzilur Rahman Masato Tsuchid
Zhuofang Li Steve Ray Ken Tubman
Patrick Lichter Phillip Raymond Yoshihiro Uchida
Jisoon Lim Terrie Reed Akib Uddin
Joon-Ho Lim Tim Reilly Sunil Unadkat
John Lin Barry Reinhold Fabio Urbani
Xiaoming Liu Brian Reinhold Philipp Urbauer
Wei-Jung Lo Melvin I. Reynolds Laura Vanzago
Charles Lowe John G. Rhoads
Alpo Värri
Jeffrey S. Robbins
Don Ludolph Andrei Vasilateanu
Chris Roberts
Christian Luszick Dalimar Velez
Bob MacWilliams Moskowitz Robert Martha Velezis
Srikkanth Madhurbootheswaran Scott M. Robertson Rudi Voon
Miriam L. Makhlouf Timothy Robertson Barry Vornbrock
Romain Marmot Patricia Order Isobel Walker
Sandra Martinez David Rosales David Wang
Miguel Martínez de Espronceda Fatemeh Saki Jerry P. Wang
Cámara Bill Saltzstein Yao Wang
Peter Mayhew Giovanna Sannino Yi Wang
7
...
SLOVENSKI STANDARD
oSIST prEN ISO/IEEE 11073-20601:2022
01-september-2022
Zdravstvena informatika - Interoperabilnost naprav - 20601. del: Komunikacija
osebnih medicinskih naprav - Profil aplikacije - Optimalni protokol izmenjave
podatkov (ISO/IEEE/FDIS 11073-20601:2022)
Health informatics - Device interoperability - Part 20601: Personal health device
communication - Application profile - Optimized exchange protocol (ISO/IEEE/FDIS
11073-20601:2022)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE/FDIS
11073-20601:2022)
Informatique de santé - Interopérabilité des dispositifs - Partie 20601: Communication
entre dispositifs de santé personnels - Profil d'application - Protocole d'échange optimisé
(ISO/IEEE/FDIS 11073-20601:2022)
Ta slovenski standard je istoveten z: prEN ISO/IEEE 11073-20601
ICS:
11.040.99 Druga medicinska oprema Other medical equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
oSIST prEN ISO/IEEE 11073-20601:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-20601
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2022-06-16
Part 20601:
Voting terminates on:
Personal health device communication
2022-11-03
— Application profile — Optimized
exchange protocol
Informatique de santé — Interopérabilité des dispositifs —
Partie 20601: Communication entre dispositifs de santé personnels —
Profil d'application — Protocole d'échange optimisé
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEEE FDIS 11073-20601:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE FDIS 11073-20601:2022(E)
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-20601
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
Part 20601:
Voting terminates on:
Personal health device communication
— Application profile — Optimized
exchange protocol
Informatique de santé — Interopérabilité des dispositifs —
Partie 20601: Communication entre dispositifs de santé personnels —
Profil d'application — Protocole d'échange optimisé
COPYRIGHT PROTECTED DOCUMENT
ISO/CEN PARALLEL PROCESSING
© IEEE 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
Institute of Electrical and Electronics Engineers, Inc
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
3 Park Avenue, New York
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
NY 10016-5997, USA
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: stds.ipr@ieee.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/IEEE FDIS 1107320601:2022(E)
Website: www.ieee.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© IEEE 2022 – All rights reserved
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE FDIS 11073-20601:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-20601 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-20601-2019) and drafted in accordance with its editorial
rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development
Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health
informatics.
This third edition cancels and replaces the second edition (ISO/IEEE 11073-20601:2016), which has
been technically revised. It also incorporates the Technical Corrigendum ISO/IEEE 11073-
20601:2016/Cor 1:2016.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
---------------------- Page: 6 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
IEEE Std 11073-20601™-2019
(Revision of IEEE Std 11073-20601-2014)
Health informatics—Personal health device communication
Part 20601: Application profile—
Optimized Exchange Protocol
Developed by the
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 5 September 2019
IEEE SA Standards Board
---------------------- Page: 7 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, a common framework for making an abstract model of personal health data
available in transport-independent transfer syntax required to establish logical connections
between systems and to provide presentation capabilities and services needed to perform
communication tasks is described in this standard. The protocol is optimized to personal health
usage requirements and leverages commonly used methods and tools wherever possible.
Keywords: IEEE 11073-20601™, medical device communication, personal health devices
•
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2019 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 20 December 2019. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-6379-9 STD24014
Print: ISBN 978-1-5044-6380-5 STD24014
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
---------------------- Page: 8 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
---------------------- Page: 9 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
---------------------- Page: 10 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at http://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at http://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
---------------------- Page: 11 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Participants
At the time this standard was completed, the Personal Health Devices Working Group had the following
membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Karsten Aalders Wenjuan Chen Rick Geimer
Charles R. Abbruscato James Cheng Igor Gejdos
Nabil Abujbara Ferenc Gerbovics
Peggy Chien
Maher Abuzaid Alan Godfrey
David Chiu
James Agnew
Jinyong Choi Nicolae Goga
Haidar Ahmad Chia-Chin Chong Julian Goldman
Manfred Aigner Saeed A. Choudhary Raul Gonzalez Gomez
Jorge Alberola Jinhan Chung Chris Gough
Rolf Ambuehl John A. Cogan Channa Gowda
David Aparisi John T. Collins Charles M. Gropper
Lawrence Arne Cory Condek Amit Gupta
Diego B. Arquillo Todd H. Cooper Jeff Guttmacher
Serafin Arroyo David Cornejo Rasmus Haahr
Muhammad Asim Douglas Coup Christian Habermann
Kit August Nigel Cox Michael Hagerty
Doug Baird Hans Crommenacker Jerry Hahn
David Baker Tomio Crosley Robert Hall
Anindya Bakshi Allen Curtis Shu Han
Ananth Balasubramanian Eyal Dassau Nathaniel Hamming
Sunlee Bang Rickey L. Hampton
David Davenport
M. Jonathan Barkley
Russell Davis Sten Hanke
Gilberto Barrón Sushil K. Deka Aki Harma
David Bean Ciro de la Vega Jordan Hartmann
John Bell Pedro de-las-Heras-Quiros Kai Hassing
Rudy Belliardi Jim Dello Stritto Wolfgang Heck
Kathryn M. Bennett Matthew d’Entremont Nathaniel Heintzman
Daniel Bernstein Kent Dicks Charles Henderson
George A. Bertos Hyoungho Do Jun-Ho Her
Chris Biernacki Alistair Donaldson Helen B. Hernandez
Ola Björsne Xiaolian Duan Takashi Hibino
Thomas Blackadar Brian Dubreuil Timothy L. Hirou
Marc Blanchet Sourav Dutta Allen Hobbs
Thomas Bluethner Jakob Ehrensvard Alex Holland
Douglas P. Bogia Fredrik Einberg Arto Holopainen
Xavier Boniface Michihiro Enokida Kris Holtzclaw
Shannon Boucousis Javier Escayola Calvo Xinyi Hong
Julius Broma Mark Estes Robert Hoy
Leonardo Estevez
Lyle G. Bullock, Jr. Frank Hsu
Hailing Feng
Bernard Burg Anne Huang
Chris Burns Bosco T. Fernandes Sen-Der Huang
Anthony Butt Christoph Fischer Zhiyong Huang
Jeremy Byford-Rew Morten Flintrup Ron Huby
Satya Calloji Joseph W. Forler David Hughes
Xiaoying Cao Russell Foster Robert D. Hughes
Carole C. Carey Eric Freudenthal Jiyoung Huh
Craig Carlson Matthias Frohner Hugh Hunter
Santiago Carot-Nemesio Ken Fuchs Hitoshi Ikeda
Randy W. Carroll Jing Gao Yutaka Ikeda
Simon Carter Qi Gao Philip O. Isaacson
Seungchul Chae Marcus Garbe Atsushi Ito
Rahul Chauhan John Garguilo Michael Jaffe
6
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Praduman Jain Jim McCain Jose A. Santos-Cadenas
Danny Jochelson Stefan Sauermann
László Meleg
Phaneeth Junga John Sawyer
Alexander Mense
Akiyoshi Kabe Behnaz Minaei Guillaume Schatz
Steve Kahle Jinsei Miyazaki Alois Schloegl
Tomio Kamioka Erik Moll Paul S. Schluter
James J. Kang Darr Moore Lars Schmitt
Kei Kariya Carsten Mueglitz Mark G. Schnell
Andy Kaschl Piotr Murawski Richard A. Schrenker
Junzo Kashihara Soundharya Nagasubramanian Antonio Scorpiniti
Kohichi Kashiwagi Jae-Wook Nah KwangSeok Seo
Ralph Kent Alex Neefus Riccardo Serafin
Laurie M. Kermes Trong-Nghia Nguyen-Dobinsky Sid Shaw
Ikuo Keshi Michael E. Nidd Frank Shen
Ahmad Kheirandish Jim Niswander Min Shih
Junhyung Kim Hongliang Niu Mazen Shihabi
Minho Kim Hiroaki Niwamoto Redmond Shouldice
Min-Joon Kim Sternly K. Simon
Thomas Norgall
Taekon Kim Marjorie Skubic
Anand Noubade
Tetsuya Kimura
Yoshiteru Nozoe Robert Smith
Alfred Kloos Abraham Ofek Ivan Soh
Jeongmee Koh Brett Olive Motoki Sone
Jean-Marc Koller Begonya Otal Emily Sopensky
John Koon Marco Paleari Rajagopalan Srinivasan
Patty Krantz Bud Panjwani Nicholas Steblay
Raymond Krasinski Carl Pantiskas Lars Steubesand
Alexander Kraus Harry P. Pappas John (Ivo) Stivoric
Ramesh Krishna Hanna Park Raymond A. Strickland
Geoffrey Kruse Jong-Tae Park Chandrasekaran Subramaniam
Falko Kuester Myungeun Park Hermanni Suominen
Rafael Lajara Soojun Park Lee Surprenant
Pierre Landau Phillip E. Pash Ravi Swami
Jaechul Lee TongBi Pei Ray Sweidan
JongMuk Lee Lucian Pestritu Yi Tang
Kyong Ho Lee Soren Petersen Haruyuyki Tatsumi
Rami Lee James Petisce
Isabel Tejero
Peter Piction
Sungkee Lee John W. Thomas
Michael Pliskin
Woojae Lee Tom Thompson
Yonghee Lee Varshney Prabodh Jonas Tirén
Joe Lenart Jeff Price Alexandra Todiruta
Kathryn A. Lesh Harald Prinzhorn Janet Traub
Qiong Li Harry Qiu Jesús Daniel Trigo
Xiangchen Li Arif Rahman Gary Tschautscher
Yingsong Li Tanzilur Rahman Masato Tsuchid
Zhuofang Li Steve Ray Ken Tubman
Patrick Lichter Phillip Raymond Yoshihiro Uchida
Jisoon Lim Terrie Reed Akib Uddin
Joon-Ho Lim Tim Reilly Sunil Unadkat
John Lin Barry Reinhold Fabio Urbani
Xiaoming Liu Brian Reinhold Philipp Urbauer
Wei-Jung Lo Melvin I. Reynolds Laura Vanzago
Charles Lowe John G. Rhoads
Alpo Värri
Jeffrey S. Robbins
Don Ludolph Andrei Vasilateanu
Chris Roberts
Christian Luszick Dalimar Velez
Bob MacWilliams Moskowitz Robert Martha Velezis
Srikkanth Madhurbootheswaran Scott M. Robertson Rudi Voon
Miriam L. Makhlouf Timothy Robertson Barry Vornbrock
Romain Marmot Patricia Order Isobel Walker
Sandra Martinez David Rosales David Wang
Miguel Martínez de Espronceda Fatemeh Saki Jerry P. Wang
Cámara Bill Saltzstein Yao Wang
Peter Mayhew Giovanna Sannino Yi Wang
7
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Steve Warren Jia-Rong Wu Zhi Yu
Fujio Watanabe Will Wykeham Jianchao Zeng
Toru Watsuji Ariton Xhafa Jason Zhang
Mike Weng Ricky Yang Zhiqiang Zhang
Yuefeng Weng Shaoqin Ye Thomas Zhao
Kathleen Wible Melanie S. Yeung Hongyuan Zhong
Paul Williamson Qiang Yin Miha Zoubek
Jan Wittenber Done-Sik Yoo Szymon Zyskoter
The following members of the individual Standards Association balloting group voted on this standard.
Balloters may have voted for approval, disapproval, or abstention.
Juan Carreon Werner Hoelzl Beth Pumo
Randy W. Carroll Noriyuki Ikeuchi Bartien Sayogo
Lawrence Catchpole Atsushi Ito Paul S. Schluter
Keith Chow Stefan Karl Carl Singer
Malcolm Clarke Piotr Karocki Walter Struppler
Russell Davis Stuart Kerry Lai King (Anna) Tee
David Fuschi Joerg-Uwe Meyer Jan Wittenber
Randall Groves Michael Newman Oren Yuen
Nathaniel Hamming Daidi Zhong
When the IEEE SA Standards Board approved this standard on 5 September 2019, it had the following
membership:
Gary Hoffman, Chair
Ted Burse, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Masayuki Ariyoshi
David J. Law Annette Reilly
Stephen D. Dukes Joseph Levy Dorothy Stanley
J. Travis Griffith Howard Li Sha Wei
Guido Hiertz Xiaohui Liu Phil Wennblom
Christel Hunter Kevin Lu Philip Winston
Joseph L. Koepfinger* Daleep Mohla Howard Wolfman
Thomas Koshy Andrew Myles Feng Wu
John D. Kulick Jingyi Zhou
*Member Emeritus
8
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 14 ----------------------
oSIST prEN ISO/IEEE 11073-20601:2022
ISO/IEEE 11073-20601:2022(E)
Introduction
This introduction is not part of IEEE Std 11073-20601-2019, Health informatics—Personal health device
communication—Part 20601: Application profile—Optimized Exchange Protocol.
ISO and IEEE 11073 standards enable communication between medical devices and external computer
systems. This standard and corresponding IEEE 11073-104zz standards address a need for a simplified and
optimized communication approach for personal health devices, which may or may not be regulated
devices. These standards align with, and draw upon, the existing clinically focused standards to provide
easy management of data from either a clinical or personal health device.
This document addresses a need for an openly defined, independent standard for converting the collected
information into an interoperable transmission format so the information can be exchanged between agents
and managers.
Other closely related standards include the following:
1
IEEE Std 11073-00103™ [B6] provides an overview of the personal health space and defines the
underlying use cases and usage models.
ISO/IEEE 110
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.