kSIST FprEN 16285:2021

Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)

This document specifies a method to measure the deformation of the aluminium tube body.
It is applicable to cylindrical aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

Packmittel - Aluminiumtuben - Prüfverfahren zur Messung der Verformung des Mantels von Aluminiumtuben (Guillotine-Prüfung)

Dieses Dokument legt ein Verfahren zur Messung der Verformung des Mantels von Aluminiumtuben fest.
Es gilt für zylindrische Aluminiumtuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie von Lebensmitteln und anderen Haushalts- und Industrieprodukten.

Emballage - Tubes souples en aluminium - Méthode d'essai pour mesurer la déformation du corps du tube en aluminium (test Guillotine)

Le présent document spécifie une méthode pour mesurer la déformation du corps d'un tube en aluminium.
Il s'applique aux tubes en aluminium utilisés pour l'emballage des produits pharmaceutiques, cosmétiques, hygiéniques, alimentaires et autres produits domestiques et industriels.

Embalaža - Prožne aluminijaste tube - Preskusne metode za merjenje deformacije telesa aluminijaste tube (preskus z giljotino)

General Information

• Status: Not Published
• Public Enquiry End Date: 01-Oct-2020
• ICS: 55.120 - Cans. Tins. Tubes
• ICS: 77.150.10 - Aluminium products
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 10-Jun-2021
• Due Date: 29-Jul-2021
• Completion Date: 24-Jun-2021
• Ref Project: EN 16285:2021 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)

RELATIONS

• Revised: SIST EN 16285:2013 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
• Effective Date: 01-Sep-2020
• Replaces: SIST EN 16285:2013 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
• Effective Date: 10-Nov-2021

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 16285:2020
01-september-2020
Embalaža - Prožne aluminijaste tube - Preskusne metode za merjenje deformacije
telesa aluminijaste tube (preskus z giljotino)

Packaging - Flexible aluminium tubes - Test method to measure the deformation of the

aluminium tube body (Guillotine test)

Packmittel - Aluminiumtuben - Prüfverfahren zur Messung der Verformung des Mantels

von Aluminiumtuben (Guillotine-Prüfung)

Emballage - Tubes souples en aluminium - Méthode d'essai pour mesurer la déformation

du corps du tube en aluminium (test Guillotine)
Ta slovenski standard je istoveten z: prEN 16285
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 16285:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16285:2020
---------------------- Page: 2 ----------------------
oSIST prEN 16285:2020
DRAFT
EUROPEAN STANDARD
prEN 16285
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 55.120 Will supersede EN 16285:2013
English Version
Packaging - Flexible aluminium tubes - Test method to
measure the deformation of the aluminium tube body
(Guillotine test)

Emballage - Tubes souples en aluminium - Méthode Packmittel - Aluminiumtuben - Prüfverfahren zur

d'essai pour mesurer la déformation du corps du tube Messung der Verformung des Mantels von

en aluminium (test Guillotine) Aluminiumtuben (Guillotine-Prüfung)

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 261.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16285:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16285:2020
prEN 16285:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope ......................................................................................................................................................................... 4

2 Normative references ......................................................................................................................................... 4

3 Terms and definitions ......................................................................................................................................... 4

4 Testing equipment ............................................................................................................................................... 4

5 Requirements ........................................................................................................................................................ 6

6 Procedure ................................................................................................................................................................ 6

7 Test report ...........................
...