SIST EN 50109-2-3:1996
(Main)Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications -- Part 2-3: Particular requirements for contacts of electrical connectors
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications -- Part 2-3: Particular requirements for contacts of electrical connectors
Part 2-3 of this European Standard specifies detail requirements for hand crimping tools incorporating a system of multiple indentors for use with removable male and female contacts of electrical connectors and similar components. Two sizes of tool are covered, as follows: a tool for contacts with crimp barrel size 12 to 20 inclusive (tool reference EN 50109-2-3-100), see clause 5; a tool for contacts with crimp barrel size 20 and smaller (tool reference EN 50109-2-3-300), see clause 5. It includes requirements for crimped joints made with the tools
Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen -- Teil 2-3: Spezielle Anforderungen für Kontakte von elektrischen Steckverbindern
Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse fréquence et radio-fréquence -- Partie 2-3: Contacts des connecteurs électriques
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50109-2-3:1996
01-maj-1996
Hand crimping tools - Tools for the crimp termination of electric cables and wires
for low frequency and radio frequency applications - Part 2-3: Particular
requirements for contacts of electrical connectors
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low
frequency and radio frequency applications -- Part 2-3: Particular requirements for
contacts of electrical connectors
Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen
und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen -- Teil 2-3:
Spezielle Anforderungen für Kontakte von elektrischen Steckverbindern
Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse
fréquence et radio-fréquence -- Partie 2-3: Contacts des connecteurs électriques
Ta slovenski standard je istoveten z: EN 50109-2-3:1995
ICS:
25.140.30 2URGMD]DURþQRXSRUDER Hand-operated tools
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST EN 50109-2-3:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 2 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 3 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 4 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 5 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 6 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 7 ----------------------
SIST EN 50109-2-3:1996
---------------------- Page: 8 ----------------------
SIST EN 5010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.