SIST EN 60384-26:2010

Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2010)

This part of IEC 60384 is applicable to aluminium electrolytic capacitors with conductive polymer solid electrolyte primarily intended for d.c. applications for use in electronic equipment.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 26: Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem Polymerfestkörper- Elektrolyten (IEC 60384-26:2010)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 26: Spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium à electrolyte solide en polymère conducteur (CEI 60384-26:2010)

La CEI 60384-26:2010 s'applique aux condensateurs électrolytiques en aluminium à électrolyte solide en polymère conducteur destinés principalement aux applications en courant continu dans des équipements électroniques. NOTE?Les condensateurs électrolytiques en aluminium à électrolyte solide (MnO2) sont couverts par la CEI 60384-4 et la CEI 60384-4-2. Les condensateurs électrolytiques en aluminium pour montage en surface à électrolyte solide en polymère conducteur sont couverts par la CEI 60384-25 et la CEI 60384-25-1. La présente norme a pour objet de prescrire les valeurs assignées et caractéristiques préférentielles, de sélectionner, en se référant à la CEI 60384-1, les procédures d'assurance qualité appropriées, les essais et les méthodes de mesure et de donner les exigences de performances générales pour ce type de condensateur. Les sévérités et les exigences d'essai prescrites dans les spécifications particulières se rapportant à cette spécification intermédiaire doivent présenter des niveaux de performances supérieurs ou égaux, les niveaux de performance inférieurs n'étant pas autorisés.

Fiksni kondenzatorji za elektronsko opremo - 26. del: Področna specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdnim elektrolitom iz prevodnega polimera (IEC 60384-26:2010)

Ta del IEC 60384 velja za aluminijske elektrolitske kondenzatorje s trdnim elektrolitom iz prevodnega polimera, predvsem namenjene za naprave z enosmernim tokom za elektronsko opremo.

General Information

• Status: Withdrawn
• Publication Date: 07-Nov-2010
• Withdrawal Date: 15-Aug-2021
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Jul-2021
• Due Date: 22-Aug-2021
• Completion Date: 16-Aug-2021
• Ref Project: EN 60384-26:2010 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

Relations

• Replaced By: SIST EN IEC 60384-26:2018 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018)
• Effective Date: 21-Aug-2018
• Replaced By: SIST EN IEC 60384-26:2018 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018)
• Effective Date: 07-Jun-2022
• Revised: SIST EN IEC 60384-26:2018 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018)
• Effective Date: 11-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60384-26:2010
01-december-2010
)LNVQLNRQGHQ]DWRUML]DHOHNWURQVNRRSUHPRGHO3RGURþQDVSHFLILNDFLMD
)LNVQLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGQLPHOHNWUROLWRPL]SUHYRGQHJD
SROLPHUD,(&
Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed
aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-
26:2010)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 26:
Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem
Polymerfestkörper- Elektrolyten (IEC 60384-26:2010)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 26:
Spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium à
electrolyte solide en polymère conducteur (CEI 60384-26:2010)
Ta slovenski standard je istoveten z: EN 60384-26:2010
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
SIST EN 60384-26:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60384-26:2010

---------------------- Page: 2 ----------------------

SIST EN 60384-26:2010

EUROPEAN STANDARD
EN 60384-26

NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM

ICS 31.060.50


English version


Fixed capacitors for use in electronic equipment -
Part 26: Sectional specification -
Fixed aluminium electrolytic capacitors with conductive polymer solid
electrolyte
(IEC 60384-26:2010)


Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 26: Spécification intermédiaire - Teil 26: Rahmenspezifikation -
Condensateurs fixes électrolytiques Aluminium-Elektrolyt-Kondensatoren
en aluminium à electrolyte solide mit leitfähigem Polymerfestkörper-
en polymère conducteur Elektrolyten
(CEI 60384-26:2010) (IEC 60384-26:2010)




This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-26:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60384-26:2010
EN 60384-26:2010 - 2 -
Foreword
The text of document 40/2052/FDIS, future edition 1 of IEC 60384-26, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-26 on 2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-26:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60062:2004 NOTE  Harmonized as EN 60062:2004 (not modified).
IEC 60384-4:2007 NOTE  Harmonized as EN 60384-4:2007 (not modified).
IEC 60384-4-2:2007 NOTE  Harmonized as EN 60384-4-2:2007 (not modified).
IEC 60384-25:2006 NOTE  Harmonized as EN 60384-25:2006 (not modified).
IEC 60384-25-1:2006 NOTE  Harmonized as EN 60384-25-1:2006 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60384-26:2010
- 3 - EN 60384-26:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60063 1963 Preferred number series for resistors and - -
+ A1 1967 capacitors
+ A2 1977


1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance


IEC 60068-2-14 2009 Environmental testing - EN 60068-2-14 2009
Part 2-14: Tests - Test N: Change of
temperature


IEC 60068-2-20 2008 Environmental testing - EN 60068-2-20 2008
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads


IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
equipment -
Part 1: Generic specification


IEC 60410 1973 Sampling plans and procedures - -
for inspection by attributes






1)
EN 60068-1 includes A1 to IEC 60068-1 + corr. October 1988.

---------------------- Page: 5 ----------------------

SIST EN 60384-26:2010

---------------------- Page: 6 ----------------------

SIST EN 60384-26:2010
IEC 60384-26
®
Edition1.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Fixed capacitors for use in electronic equipment –
Part 26: Sectional specification – Fixed aluminium electrolytic capacitors with
conductive polymer solid electrolyte

Condensateurs fixes utilisés dans les équipements électroniques –
Partie 26: Spécification intermédiaire – Condensateurs fixes électrolytiques en
aluminium à électrolyte solide en polymère conducteur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 31.060.50 ISBN 978-2-88912-165-6
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60384-26:2010
– 2 – 60384-26 © IEC:2010
CONTENTS
FOREWORD.5
1 General .7
1.1 Scope.7
1.2 Object .7
1.3 Normative references .7
1.4 Information to be given in a detail specification .8
1.4.1 Outline drawings and dimensions .8
1.4.2 Mounting .8
1.4.3 Rating and characteristics .8
1.4.4 Marking .9
1.5 Terms and definitions .9
1.6 Marking .9
1.6.1 General .9
1.6.2 Marking on capacitor .9
1.6.3 Marking on package .9
1.6.4 Additional markings .9
2 Preferred rating and characteristics .10
2.1 Preferred characteristics .10
2.1.1 Preferred climatic categories .10
2.2 Preferred values of ratings .10
2.2.1 Nominal capacitance (C ) .10
N
2.2.2 Tolerance on nominal capacitance.10
2.2.3 Rated voltage (U ).10
R
2.2.4 Surge voltage .10
2.2.5 Rated temperature.11
3 Quality assessment procedures.11
3.1 Primary stage of manufacture.11
3.2 Structurally similar components.11
3.3 Declaration of conformity (basic requirements) .11
3.4 Test schedule and requirement for initial assessment (mandatory and
optional tests) .11
3.4.1 Qualification approval on the basis of the fixed sample size
procedures sampling .11
3.4.2 Tests .12
3.5 Quality conformance inspection.19
3.5.1 Formation of inspection lots.19
3.5.2 The schedule.20
3.5.3 Delayed delivery.20
3.5.4 Assessment levels.20
4 Test and measurement procedures.22
4.1 Pre-conditioning (if required) .22
4.2 Measuring conditions .22
4.3 Visual examination and check of dimensions.23
4.3.1 Visual examination .23
4.3.2 Requirements .23
4.4 Electrical tests.23
4.4.1 Leakage current .23

---------------------- Page: 8 ----------------------

SIST EN 60384-26:2010
60384-26 © IEC:2010 – 3 –
4.4.2 Capacitance .23
4.4.3 Tangent of loss angle (tan δ) .24
4.4.4 Equivalent series resistance (ESR).24
4.5 Robustness of terminations .24
4.5.1 Initial measurement .24
4.6 Resistance to soldering heat .24
4.6.1 Initial measurement .24
4.6.2 Test conditions .24
4.6.3 Final inspection, measurements and requirements .25
4.7 Solderability .25
4.7.1 Test conditions .25
4.7.2 Final inspection, measurements and requirements .25
4.8 Rapid change of temperature .25
4.8.1 Initial measurement .25
4.8.2 Test conditions .25
4.8.3 Final inspection, measurements and requirements .25
4.9 Vibration.25
4.9.1 Test condition.26
4.9.2 Final inspection, measurements and requirements .26
4.10 Shock.26
4.10.1 Test conditions .26
4.10.2 Final inspection, measurements and requirements .26
4.11 Bump .26
4.11.1 Test conditions .26
4.11.2 Final examination, measurements and requirements .26
4.12 Climatic sequence .27
4.12.1 Initial measurement .27
4.12.2 Dry heat .27
4.12.3 Damp heat, cyclic, Test Db, first cycle .27
4.12.4 Cold .27
4.12.5 Damp heat, cyclic, Test Db, remaining cycles .27
4.12.6 Recovery .27
4.12.7 Final inspection, measurements and requirements .27
4.13 Damp heat, steady state.27
4.13.1 Initial measurement .27
4.13.2 Test conditions .27
4.13.3 Final inspection, measurements and requirements .27
4.14 Endurance.27
4.14.1 Initial measurement .28
4.14.2 Test conditions .28
4.14.3 Final inspection, measurements and requirements .28
4.15 Surge .28
4.15.1 Initial measurement .28
4.15.2 Test procedure .28
4.15.3 Final inspection, measurements and requirements .28
4.16 Reverse voltage (if required by the detail specification) .28
4.16.1 Initial measurement .28
4.16.2 Test procedure .28
4.16.3 Final inspection, measurements and requirements .29

---------------------- Page: 9 ----------------------

SIST EN 60384-26:2010
– 4 – 60384-26 © IEC:2010
4.17 Component solvent resistance (if required by the detail specification) .29
4.17.1 Test conditions .29
4.18 Solvent resistance of the marking (if required by the detail specification) .29
4.18.1 Test conditions .29
4.19 Storage at high temperature .29
4.19.1 Initial measurement .29
4.19.2 Test conditions .29
4.19.3 Final measurements and requirements .29
4.20 Characteristics at high and low temperature .29
4.20.1 Measurements and requirements.30
4.21 Charge and discharge (if required by the detail specification).30
4.21.1 Initial measurement .30
4.21.2 Test procedure .30
4.21.3 Final inspection, measurements and requirements .30
4.22 High surge current (if required by the detail specification) .30
4.22.1 Initial measurement .30
4.22.2 Final measurements and requirements .30
Bibliography.31

Table 1 − Surge voltage.10
Table 2 − Fixed sample size test plan for qualification approval, assessment level EZ .13
Table 3 – Test schedule for qualification approval.14
Table 4 – Test plan for lot-by-lot inspection (Assessment level EZ).21
Table 5 – Test plan for periodic inspection (Assessment level EZ) .22

---------------------- Page: 10 ----------------------

SIST EN 60384-26:2010
60384-26 © IEC:2010 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 26: Sectional specification – Fixed aluminium electrolytic
capacitors with conductive polymer solid electrolyte


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-26 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
40/2052/FDIS 40/2062/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60384 series can be found, under the general title Fixed
capacitors for use in the electronic equipment, on the IEC website.

---------------------- Page: 11 ----------------------

SIST EN 60384-26:2010
– 6 – 60384-26 © IEC:2010
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 12 ----------------------

SIST EN 60384-26:2010
60384-26 © IEC:2010 – 7 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 26: Sectional specification – Fixed aluminium electrolytic
capacitors with conductive polymer solid electrolyte



1 General
1.1 Scope
This part of IEC 60384 is applicable to aluminium electrolytic capacitors with conductive
polymer solid electrolyte primarily intended for d.c. applications for use in electronic
equipment.
NOTE Aluminium electrolytic capacitors with solid (MnO ) are covered by IEC 60384-4 and IEC 60384-4-2.
2
Surface mount aluminium electrolytic capacitors with conductive polymer solid electrolyte are covered by
IEC 60384-25 and IEC 60384-25-1.
1.2 Object
The object of this standard is to prescribe preferred ratings and characteristics and to select
from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring
methods and to give general performance requirements for this type of capacitor. Test
severities and requirements prescribed in detail specifications referring to this sectional
specification shall be of equal or higher performance level, lower performance levels are not
permitted.
1.3 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60063:1963, Preferred number series for resistors and capacitors
Amendment 1 (1967)
Amendment 2 (1977)
1
IEC 60068-1:1988, Environmental testing – Part 1: General and guidance
IEC 60068-2-14:2009, Environmental testing – Part 2-14: Tests – Test N: Change of
temperature
IEC 60068-2-20:2008, Environmental testing – Part 2-20: Tests – Test T – Test methods for
solderability and resistance to soldering heat of devices with leads
IEC 60384-1:2008, Fixed capacitors for use in electronic equipment – Part 1: Generic
specification
IEC 60410:1973, Sampling plans and procedures for inspection by attributes
—————————
1
 For the tests in the IEC 60068 series of publication, the editions referenced in the applicable test clauses of the
generic specification shall be used.

---------------------- Page: 13 ----------------------

SIST EN 60384-26:2010
– 8 – 60384-26 © IEC:2010
1.4 Information to be given in a detail specification
Detail specifications shall be derived from the relevant blank detail specification.
Detail specifications shall not specify requirements inferior to those of the generic, sectional
or blank detail specification. When more severe requirements are included, they shall be
listed in 1.9 of the detail specification and indicated in the test schedules, for example by an
asterisk.
NOTE The information given in 1.4.1 may for convenience, be presented in tabular form.
The following information shall be given in each detail specification and the values quoted
shall preferably be selected from those given in the appropriate clause of this sectional
specification.
1.4.1 Outline drawings and dimensions
There shall be an illustration of the capacitor as an aid to easy recognition and for comparison
of the capacitor with others. Dimensions and their associated tolerances, which affect
interchangeability and mounting, shall be given in the detail specification. All dimensions shall
preferably be stated in millimeters.
Normally the numerical values shall be given for cylindrical types, the body diameter, and the
length and diameter, and the spacing of the terminations. When necessary, for example when
a number of items (capacitance values/voltage ranges) are covered by a detail specification,
the dimensions and their associated tolerances shall be placed in a table below the drawing.
When the configuration is other than described above, the detail specification shall state such
dimensional infor
...