SIST ISO/TR 13387-6:2001

Fire safety engineering -- Part 6: Structural response and fire spread beyond the enclosure of origin

Ingénierie de la sécurité contre l'incendie -- Partie 6: Réponse structurelle et propagation du feu au delà de l'enceinte d'origine

Požarno inženirstvo - 6. del: Odziv konstrukcije in širjenje požara izven prostora nastanka požara

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2001
• Withdrawal Date: 16-Nov-2023
• ICS: 13.220.01 - Protection against fire in general
• Technical Committee: POZ - Požarna varnost
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 17-Nov-2023
• Due Date: 10-Dec-2023
• Completion Date: 17-Nov-2023
• Ref Project: ISO/TR 13387-6:1999 - Fire safety engineering — Part 6: Structural response and fire spread beyond the enclosure of origin

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO/TR 13387-6:2001
01-februar-2001
Požarno inženirstvo - 6. del: Odziv konstrukcije in širjenje požara izven prostora
nastanka požara
Fire safety engineering -- Part 6: Structural response and fire spread beyond the
enclosure of origin
Ingénierie de la sécurité contre l'incendie -- Partie 6: Réponse structurelle et propagation
du feu au delà de l'enceinte d'origine
Ta slovenski standard je istoveten z: ISO/TR 13387-6:1999
ICS:
13.220.01 Varstvo pred požarom na Protection against fire in
splošno general
SIST ISO/TR 13387-6:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/TR 13387-6:2001

---------------------- Page: 2 ----------------------

SIST ISO/TR 13387-6:2001
TECHNICAL ISO/TR
REPORT 13387-6
First edition
1999-10-15
Fire safety engineering —
Part 6:
Structural response and fire spread beyond the
enclosure of origin
Ingénierie de la sécurité contre l'incendie —
Partie 6: Réponse structurelle et propagation du feu au-delà de l'enceinte
d'origine
A
Reference number
ISO/TR 13387-6:1999(E)

---------------------- Page: 3 ----------------------

SIST ISO/TR 13387-6:2001
ISO/TR 13387-6:1999(E)
Contents
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 Symbols and abbreviated terms .3
5 Subsystem 3 of the total design system .3
6 Subsystem 3 evaluations.5
6.1 General.5
6.2 Thermal response.5
6.3 Mechanical response.7
6.4 Fire spread.9
7 Engineering methods .13
7.1 General.13
7.2 Estimation formulae .13
7.3 Computer models .13
7.4 Experimental methods .14
8 Guidance for setting criteria.14
Bibliography.16
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO/TR 13387-6:2001
© ISO
ISO/TR 13387-6:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the
...

TECHNICAL ISO/TR
REPORT 13387-6
First edition
1999-10-15
Fire safety engineering —
Part 6:
Structural response and fire spread beyond the
enclosure of origin
Ingénierie de la sécurité contre l'incendie —
Partie 6: Réponse structurelle et propagation du feu au-delà de l'enceinte
d'origine
A
Reference number
ISO/TR 13387-6:1999(E)

---------------------- Page: 1 ----------------------
ISO/TR 13387-6:1999(E)
Contents
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 Symbols and abbreviated terms .3
5 Subsystem 3 of the total design system .3
6 Subsystem 3 evaluations.5
6.1 General.5
6.2 Thermal response.5
6.3 Mechanical response.7
6.4 Fire spread.9
7 Engineering methods .13
7.1 General.13
7.2 Estimation formulae .13
7.3 Computer models .13
7.4 Experimental methods .14
8 Guidance for setting criteria.14
Bibliography.16
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
© ISO
ISO/TR 13387-6:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
The main task of ISO technical committees is to prepare International Standards, but in exceptional circumstances a
technical committee may propose the publication of a Technical Report of one of the following types:
 type 1, when the required support cannot be obtained for the publication of an International Standard, despite
repeated efforts;
 type 2, when the subject is still under technical development or where for any other reason there is the future
but not immediate possibility of an agreement on an International Standard;
 type 3, when a technical committee has collected data of a differen
...