SIST EN IEC 60749-17:2019
(Main)Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation (IEC 60749-17:2019)
Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation (IEC 60749-17:2019)
The neutron irradiation test is performed to determine the susceptibility of semiconductor
devices to non-ionizing energy loss (NIEL) degradation. The test described herein is
applicable to integrated circuits and discrete semiconductor devices and is intended for
military- and aerospace-related applications. It is a destructive test.
The objectives of the test are as follows:
a) to detect and measure the degradation of critical semiconductor device parameters as
a function of neutron fluence, and
b) to determine if specified semiconductor device parameters are within specified limits after
exposure to a specified level of neutron fluence (see Clause 6).
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 17: Neutronenbestrahlung (IEC 60749-17:2019)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 17: Irradiation aux neutrons (IEC 60749-17:2019)
L’essai d’irradiation aux neutrons est réalisé pour déterminer la sensibilité des dispositifs à semiconducteurs à la dégradation par perte d’énergie non ionisante (NIEL, Non-Ionizing
Energy Loss). L’essai décrit dans le présent document s’applique aux circuits intégrés et aux dispositifs discrets à semiconducteurs, et est destiné aux applications des domaines militaire et aérospatial. Il s’agit d’un essai destructif.
Les objectifs de l’essai sont les suivants:
a) détecter et mesurer la dégradation des paramètres critiques des dispositifs à semiconducteurs en fonction de la fluence des neutrons; et
b) déterminer si des paramètres spécifiés des dispositifs à semiconducteurs sont dans les limites spécifiées après exposition à un niveau spécifié de fluence de neutrons (voir Article 6).
Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 17. del: Obsevanje z nevtroni (IEC 60749-17:2019)
Preskus obsevanja z nevtroni se izvaja za določanje dovzetnosti polprevodniških elementov za degradacijo zaradi neionizacijske izgube energije (NIEL). Tukaj opisan preskus se uporablja za integrirana vezja in diskretne polprevodniške elemente in je namenjen za vojaško in aeronavtično uporabo. To je porušitveni preskus.
Cilji tega preskusa so naslednji:
a) zaznavanje in merjenje degradacije kritičnih parametrov polprevodniških elementov kot funkcije fluence nevtronov, in
b) ugotavljanje, ali so določeni parametri polprevodniških elementov znotraj določenih omejitev po izpostavitvi določeni ravni fluence nevtronov (glej 6. točko).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60749-17:2019
01-julij-2019
Nadomešča:
SIST EN 60749-17:2004
Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 17. del:
Obsevanje z nevtroni (IEC 60749-17:2019)
Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron
irradiation (IEC 60749-17:2019)
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 17:
Neutronenbestrahlung (IEC 60749-17:2019)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie
17: Irradiation aux neutrons (IEC 60749-17:2019)
Ta slovenski standard je istoveten z: EN IEC 60749-17:2019
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 60749-17:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60749-17:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 60749-17:2019
EUROPEAN STANDARD EN IEC 60749-17
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2019
ICS 31.080.01 Supersedes EN 60749-17:2003
English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 17: Neutron irradiation
(IEC 60749-17:2019)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 17: Irradiation aux Prüfverfahren - Teil 17: Neutronenbestrahlung
neutrons (IEC 60749-17:2019)
(IEC 60749-17:2019)
This European Standard was approved by CENELEC on 2019-05-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60749-17:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60749-17:2019
EN IEC 60749-17:2019 (E)
European foreword
The text of document 47/2538/FDIS, future edition 2 of IEC 60749-17, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60749-17:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-02
document have to be withdrawn
This document supersedes EN 60749-17:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60749-17:2019 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60749-17:2019
IEC 60749-17
®
Edition 2.0 2019-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Semiconductor devices – Mechanical and climatic test methods –
Part 17: Neutron irradiation
Dispositifs à semiconducteurs – Méthodes d’essais mécaniques et climatiques –
Partie 17: Irradiation aux neutrons
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.080.01 ISBN 978-2-8322-6702-8
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN IEC 60749-17:2019
– 2 – IEC 60749-17:2019 © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test apparatus . 5
4.1 Test instruments . 5
4.2 Radiation source . 5
4.3 Dosimetry equipment . 6
4.4 Dosimetry measurements . 6
4.4.1 Neutron fluences . 6
4.4.2 Dose measurements . 6
5 Procedure . 6
5.1 Safety requirements . 6
5.2 Test samples . 6
5.3 Pre-exposure . 7
5.3.1 Electrical tests . 7
5.3.2 Exposure set-up . 7
5.4 Exposure . 7
5.5 Post-exposure . 7
5.5.1 Electrical tests . 7
5.5.2 Anomaly investigation . 7
5.6 Reporting . 7
6 Summary . 8
Bibliography . 9
---------------------- Page: 6 ----------------------
SIST EN IEC 60749-17:2019
IEC 60749-17:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –
Part 17: Neutron irradiation
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60749-17 has been prepared by IEC technical committee 47:
Semiconductor devices.
This second edition cancels and replaces the first edition published in 2003. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with res
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.