SIST EN 1338:2003/AC:2006
(Amendment)Concrete paving blocks - Requirements and test methods
Concrete paving blocks - Requirements and test methods
This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard.
Pflastersteine aus Beton - Anforderungen und Prüfverfahren
Pavés en béton - Prescriptions et méthodes d'essai
Betonski tlakovci - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Betonski tlakovci - Zahteve in preskusne metodePflastersteine aus Beton - Anforderungen und PrüfverfahrenPavés en béton - Prescriptions et méthodes d'essaiConcrete paving blocks - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 1338:2003/AC:2006SIST EN 1338:2003/AC:2006en01-december-2006SIST EN 1338:2003/AC:2006SLOVENSKI
STANDARD
SIST EN 1338:2003/AC:2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1338:2003/ACMay 2006Mai 2006Mai 2006ICS 93.080.20English versionVersion FrançaiseDeutsche FassungConcrete paving blocks - Requirements and test methodsPavés en béton - Prescriptions et méthodesd'essaiPflastersteine aus Beton - Anforderungenund PrüfverfahrenThis corrigendum becomes effective on 17 May 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 17 mai 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 17.Mai 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 1338:2003/AC:2006 D/E/FSIST EN 1338:2003/AC:2006
EN 1338:2003/AC:2006 (E/F/D) 2
English version
Contents
Insert the sub-clause number and indent the title for clause G.8.
Insert the numbers and headings for sub-clauses ZA.1, ZA.2 and ZA.3.
Foreword
In the third paragraph, first line, replace 'a mandate' with 'Mandates M/119 and M/122'.
Clause 2 – Normative references
EN ISO 6506-1 – replace '(ISO 6506-1: 1999)' by ’(ISO 6506-1:2005)’
EN ISO 6506-2 – replace '(ISO 6506-2: 1999)' by (ISO 6506-2:2005)’
EN ISO 6506-3 – replace '(ISO 6506-3: 1999)' by ’(ISO 6506-3:2005)’
Table 1
In the heading 'Block thickness', replace 'Mm' with 'mm'.
Table 3
In the heading 'Length of gauge', replace 'Mm' with 'mm'.
Ta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.