SIST EN 60512-24-1:2013

Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to measure the residual magnetism of a connector after exposure to a specified magnetic field.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 24-1: Prüfungen im magnetischen Störfeld - Prüfung 24a: Restmagnetismus

Connecteurs pour équipements électroniques - Essais et mesures - Partie 24-1: Essais de perturbations magnétiques - Essai 24a: Magnétisme résiduel

La CEI 60512-24-1:2010 est utilisée pour les essais des connecteurs du domaine d'activité du comité d'études 48, lorsque la spécification particulière l'exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu'une spécification particulière le stipule. L'objet de cette norme est de définir une méthode normalisée pour mesurer le magnétisme résiduel d'un connecteur après son exposition à un champ magnétique spécifié.",PE

Konektorji za elektronsko opremo - Preskusi in meritve - 24-1. del: Preskušanje elektromagnetnega motenja - Preskus 24a: Preostali magnetizem

Ta del standarda IEC 60512 se uporablja, če tako zahteva podrobna specifikacija, za preskušanje konektorjev na področju uporabe tehničnega odbora 48. Lahko se uporablja tudi za podobne elemente, če je tako določeno v podrobni specifikaciji. Cilj tega standarda je opredeliti standardno metodo za merjenje preostalega magnetizma konektorja po izpostavljenosti določenemu magnetnemu polju.

General Information

• Status: Published
• Publication Date: 21-Jan-2013
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Jan-2013
• Due Date: 18-Mar-2013
• Completion Date: 22-Jan-2013
• Ref Project: EN 60512-24-1:2012 - Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-24-1:2013
01-marec-2013
Konektorji za elektronsko opremo - Preskusi in meritve - 24-1. del: Preskušanje
elektromagnetnega motenja - Preskus 24a: Preostali magnetizem
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic
interference tests - Test 24a: Residual magnetism
Ta slovenski standard je istoveten z: EN 60512-24-1:2012
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-24-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-24-1:2013

---------------------- Page: 2 ----------------------

SIST EN 60512-24-1:2013

EUROPEAN STANDARD
EN 60512-24-1

NORME EUROPÉENNE
November 2012
EUROPÄISCHE NORM

ICS 31.220.01


English version


Connectors for electronic equipment -
Tests and measurements -
Part 24-1: Magnetic interference tests -
Test 24a: Residual magnetism
(IEC 60512-24-1:2010)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Essais et mesures - Einrichtungen - Mess- und Prüfverfahren -
Partie 24-1: Essais de perturbations Teil 24-1: Prüfungen im magnetischen
magnétiques - Essai 24a: Magnétisme Störfeld - Prüfung 24a: Restmagnetismus
résiduel (IEC 60512-24-1:2010)
(CEI 60512-24-1:2010)




This European Standard was approved by CENELEC on 2010-04-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-24-1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60512-24-1:2013
EN 60512-24-1:2012 - 2 -
Foreword
The text of document 48B/2027/CDV, future edition 1 of IEC 60512-24-1, prepared by SC 48B
"Connectors" of IEC/TC 48 "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60512-24-1:2012.

The following dates are fixed:
(dop) 2013-05-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-04-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60512-24-1:2010 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60512-24-1:2013
IEC 60512-24-1
®
Edition 1.0 2010-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Connectors for electronic equipment – Tests and measurements –
Part 24-1: Magnetic interference tests – Test 24a: Residual magnetism

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 24-1: Essais de perturbations magnétiques – Essai 24a: Magnétisme
résiduel

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
D
CODE PRIX
ICS 31.220.01 ISBN 978-2-88910-205-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60512-24-1:2013
– 2 – 60512-24-1 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 24-1: Magnetic interference tests –
Test 24a: Residual magnetism


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entr
...