iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61851-24:2014/AC:2015

(Corrigendum)

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Konduktive Ladesysteme für Elektrofahrzeuge - Teil 24: Digitale Kommunikation zwischen einer Gleichstromladestation für Elektrofahrzeuge und dem Elektrofahrzeug zur Steuerung des Gleichstromladevorgangs

Système de charge conductive pour véhicules électriques - Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge à courant continu

Sistem kabelskega napajanja električnih vozil - 24. del: Digitalna komunikacija med enosmerno (d.c.) EV-napajalno postajo in električnim vozilom za krmiljenje enosmernega (d.c.) napajanja - Popravek AC

General Information

Status
Published
Publication Date
06-Aug-2015
ICS
43.120 - Electric road vehicles
Technical Committee
CEV - Electric passenger and commercial vehicles
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Jul-2015
Due Date
12-Sep-2015
Completion Date
07-Aug-2015
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/468 - Standardisation mandate addressed to CEN and CENELEC and ETSI concerning the charging of electric vehicles
Ref Project
EN 61851-24:2014/AC:2015 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Relations

Corrects
SIST EN 61851-24:2014 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
Effective Date
01-Sep-2015

Buy Standard

EN 61851-24:2014/AC:2015EN 61851-24:2014/AC:2015
PreviousNext
Corrigendum
EN 61851-24:2014/AC:2015
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UPLOMHQMHKonduktive Ladesysteme für Elektrofahrzeuge - Teil 24: Digitale Kommunikation zwischen einer Gleichstromladestation für Elektrofahrzeuge und dem Elektrofahrzeug zur Steuerung des GleichstromladevorgangsSystème de charge conductive pour véhicules électriques - Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge à courant continuElectric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging43.120Electric road vehiclesICS:Ta slovenski standard je istoveten z:EN 61851-24:2014/AC:2015SIST EN 61851-24:2014/AC:2015en01-september-2015SIST EN 61851-24:2014/AC:2015SLOVENSKI
STANDARD



SIST EN 61851-24:2014/AC:2015



IEC 61851-24:2014/COR1:2015 – 1 –
© IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
IEC 61851-24 Edition 1.0
2014-03
ELECTRIC VEHICLE CONDUCTIVE
CHARGING SYSTEM –
Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging IEC 61851-24 Édition 1.0
2014-03
SYSTÈME DE CHARGE CONDUCTIVE POUR VÉHICULES ÉLECTRIQUES –
Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge
à courant continu
CORRIGENDUM 1
Corrections to the French version appear after the English text. Les corrections à la version française sont données après le texte anglais.
2
Normative references Add the footnote "1
To be published.". 3.2
parameter This correction applies to the French text only. 5 Digital communication architecture This correction applies to the French text only.
Table A.1 – Communication actions and parameters during d.c. charging control process between system A station and vehicle This correction applies to the French text only. Figure A.1 – Sequence diagram of d.c. charging control communication for system A
Replace "less than 10 V" by "10 V or less". Replace "less than 20 V" by "20 V or less". Replace "less than 5 A" by "5 A or less". As follows:
IEC 61851-24:2014/COR1:2015(en-fr)
SIST EN 61851-24:2014/AC:2015



– 2 – IEC 61851-24:2014/COR1:2015
© IEC 2015Start request Transmit "Charging Start (CP)" signal
Process the information for charge control before charging (battery compatibility, charging time calculation etc.) Lock vehicle connector Check the termination of isolation test (Voltage of d.c. power line is 20 V or less) Transmit "Charging Start (CP2)" signal
Receive "Charging Start (CP)" signal
Process the information for charge control before charging (on-board battery information, maximum charging time etc.) Transmit the signal and parameter of vehicle setup completion Transmit "Charging Current Request" Charging completed
Transmit the signal and parameter of charging stop request Stop charging Close EV contactors 'c'
Open EV contactors 'c' Start charging current output Check that voltage of d.c. power line is
10 V or less Unlock vehicle connector Terminate digital communication Terminate digital communicatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61980-2:2023(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities (IEC 61980-2:2023)
EN IEC 61980-2:2023

This Part of IEC 61980 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems.
The requirements in this document are intended to be applied for MF-WPT systems accordin to IEC 61980-3 and ISO 19363.
The aspects covered in this document include:
- operational and functional characteristics of the MF-WPT communication system and related activities
- operational and functional characteristics of the positioning system
The following aspects are under consideration for future documents:
- requirements for two- and three-wheel vehicles,
- requirements for MF-WPT systems supplying power to EVs in motion, and
- requirements for bidirectional power transfer
Note: Any internal communication at Supply device or EV device is not in the scope of this document

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61980-3:2023(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems (IEC 61980-3:2022)
EN IEC 61980-3:2022

This part of IEC 61980 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary.
Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363.
The aspects covered in this document include
- the characteristics and operating conditions,
- the required level of electrical safety,
- requirements for basic communication for safety and process matters if required by a MF111 WPT system,
- requirements for positioning to assure efficient and safe MF-WPT power transfer, and
- specific EMC requirements for MF-WPT systems.
The following aspects are under consideration for future documents:
- requirements for MF-WPT systems for two- and three-wheel vehicles,
- requirements for MF-WPT systems supplying power to EVs in motion, and
- requirements for bidirectional power transfer.
- requirements for flush mounted primary devices
- requirements for MF-WPT systems for heavy duty vehicles
- requirements for MF-WPT systems with inputs greater than 11,1 kVA
This standard does not apply to
- safety aspects related to maintenance, and
- trolley buses, rail vehicles and vehicles designed primarily for use off-road.
NOTE The terms used in this document are specifically for MF-WPT.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63119-2:2023(Main)
Information exchange for electric vehicle charging roaming service - Part 2: Use cases (IEC 63119-2:2022)
EN IEC 63119-2:2022

The Standard specifies roaming use cases of information exchange between EV Charge Service Providers (CSP), Charging Station Operators (CSOs) and Clearing House platforms through roaming endpoints. The elementary use cases defined in this document of IEC 63119-2 are designed to support the user to have access to the EV supply equipment which doesn’t belong to the Home-CSP.
IEC 63119 series are applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and CSO with or without Clearing House platform through the roaming endpoint.
IEC 63119 series do not specify the communication either between Charging Station (CS) and Charging Station Operator (CSO) or between EV and CS.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63110-1:2022(Main)
Protocol for Management of Electric Vehicles charging and discharging infrastructures - Part 1: Basic Definitions, Use Cases and architecture
EN IEC 63110-1:2022

The scope of this document, as a basis for the other parts of IEC 63110, covers the definitions, use cases and architecture for the management of electric vehicles charging and discharging infrastructures.
It addresses the general requirements for the establishment of an e-mobility eco-system, therefore covering the communication flows between the different e-mobility actors as well as data flows with the electric power system.
This standard covers the following features:
- Management of energy transfer (e.g. charging session), reporting, including information exchanges related to the required energy, grid usage, contractual data, metering data;
- Asset management of EV supply equipment, including controlling, monitoring, maintenance, provisioning, firmware update, and configuration (profiles) of EV supply equipment;
- Authentication/authorisation/payment of charging and discharging sessions, incl. roaming, pricing and metering information;
- The provision of other e-mobility services;
- Cybersecurity.

  • Standard
    155 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61851-21-2:2021(Main)
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems
EN IEC 61851-21-2:2021

This part of IEC 61851 defines the EMC requirements for any off-board components or
equipment of such systems used to supply or charge electric vehicles with electric power by
conductive power transfer (CPT), with a rated input voltage, according to IEC 60038:2009, up
to 1 000 V AC or 1 500 V DC and an output voltage up to 1 000 V AC or 1 500 V DC.
This document covers off-board charging equipment for mode 1, mode 2, mode 3 and mode 4
charging as defined in IEC 61851-1:2017.
Cables where there is no electronics or no electric/electronic switching are considered as
passive (benign) and are deemed to comply with the emission and immunity requirements of
this document without any need for testing.
This document does not apply to any on-board components or equipment of charging or
power supply systems being part of the vehicles. The EMC requirements for such equipment
are covered by IEC 61851-21-1: 2017.
Compliance with the emission and immunity requirements of this document is verified where it
can be demonstrated that the equipment under test (EUT) meets the respective limits, during
type tests in the measuring arrangement of this document.
Requirements for electric vehicle wireless power transfer (WPT) systems are covered in
IEC 61980 (all parts).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61980-1:2021(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements
EN IEC 61980-1:2021

This part of IEC 61980 applies to the supply device for charging electric road vehicles using
wireless methods at standard supply voltages per IEC 60038 up to 1 000 V AC and up to
1 500 V DC.
Electric road vehicles (EV) covers road vehicles, including plug-in hybrid road vehicles (PHEV)
that derive all or part of their energy from on-board rechargeable energy storage systems
(RESS).
This document also applies to wireless power transfer (WPT) equipment supplied from on-site
storage systems (e.g. buffer batteries).
The aspects covered in this document include
• the characteristics and operating conditions of a supply device,
• the specification for required level of electrical safety of a supply device,
• communication between EV device and vehicle to enable and control WPT,
• efficiency, alignment and other activities to enable WPT, and
• specific EMC requirements for a supply device.
The following aspects are under consideration for future documents:
• requirements for MF-WPT systems supplying power to EVs in motion;
• requirements for bidirectional power transfer.
This document does not apply to:
• safety aspects related to maintenance,
• WPT system for trolley buses, rail vehicles and vehicles designed primarily for use off‑road,
and
• any safety or EMC requirements for the vehicle side.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61851-25:2021(Main)
Electric vehicle conductive charging system - Part 23-2: DC EV supply equipment where protection relies on electrical separation
EN IEC 61851-25:2021

This document applies to the DC EV supply equipment for charging electric road vehicles with
a rated supply voltage of up to 480 V AC or up to 600 V DC, with rated output voltage not
exceeding 120 V DC and output currents not exceeding 100 A DC.
This document provides the requirements for the DC EV supply equipment where the secondary
circuit is protected from the primary circuit by electrical separation.
Requirements for bi-directional power flow are not covered in this document.
This document also provides the requirements for the control and the communication between
DC EV supply equipment and an EV.
This document also applies to DC EV supply equipment supplied from on-site storage systems.
The aspects covered in this document include:
• characteristics and operating conditions of the DC EV supply equipment;
• specification of the connection between the DC EV supply equipment and the EV;
• requirements for electrical safety for the DC EV supply equipment.
Additional requirements can apply to equipment designed for specific environments or
conditions, for example:
• DC EV supply equipment located in hazardous areas where flammable gas or vapour and/or
combustible materials, fuels or other combustible, or explosive materials are present;
• DC EV supply equipment designed to be installed at an altitude of more than 2 000 m;
• DC EV supply equipment intended to be used on-board ships.
Requirements for electrical devices and components used in DC EV supply equipment are not
included in this document and are covered by their specific product standards.
This document does not apply to:
• safety aspects related to maintenance;
• charging of trolley buses, rail vehicles, industrial trucks and vehicles designed primarily for
use off-road;
• equipment on the EV;
• EMC requirements for equipment on the EV while connected, which are covered in
IEC 61851-21-1;
• charging the RESS off-board the EV.
NOTE In the following countries electrical separation can only be handled by skilled people: CH

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61980-3:2020(Main)
Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems
CLC IEC/TS 61980-3:2020

This part of IEC 61980 series, (in a first step as Technical Specification for three-year period) applies to the equipment for the magnetic field-wireless power transfer (MF-WPT) of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in an operational state when connected to the supply network, at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.This standard also applies to MF-WPT equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.

  • Technical specification
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61980-2:2020(Main)
Electric vehicle wireless power transfer (wpt) systems - Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure with respect to wireless power transfer (WPT) systems
CLC IEC/TS 61980-2:2020

This Part of IEC 61980, (in a first step as Technical Specification for three-year period) applies to communication between electric road vehicle (EV) and wireless power transfer (WPT) systems when connected to the supply network, at standard supply voltages per IEC 60038 up to 1000V a.c. and up to 1500 V d.c..This standard also applies to Wireless Power Transfer (WPT) equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages per IEC 60038 up to 1000V a.c. and up to 1500 V d.c..

  • Technical specification
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63119-1:2019(Main)
Information exchange for Electric Vehicle charging roaming service - Part 1:General
EN IEC 63119-1:2019

This European Standard establishes a basis for the other parts of IEC 63119, specifying the terms and definitions, general description of the system model, classification, information exchange and security mechanisms for roaming between EV charge service providers (CSPs), charging station operators (CSOs) and clearing house platforms through roaming endpoints. It provides an overview and describes the general requirements of the EV roaming service system. IEC 63119 (all parts) is applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and a CSO with or without a clearing house platform through the roaming endpoint. IEC 63119 (all parts) does not specify the information exchange, either between the charging station (CS) and the charging station operator (CSO), or between the EV and the CS.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day