Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard

This document defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660-002
Temperature range,   Class N:   -65 °C to 200 °C
Class W:   -65 °C to 175 °C
Class K:   -65 °C to 260 °C
Class A:   -65 °C to 260 °C
Class T:   -65 °C to 175 °C (nickel PTFE plating)
Class Z:   -65 °C to 175 °C (black zinc nickel plating)

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm

No Scope available

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord, type A, coudé à 90°, non étanche, avec brides serre-câbles - Norme de produit

Le présent document définit une gamme de raccords de type A, coudés à 90°, non étanches, avec brides serre-câbles, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) :   EN 3660-002
Plage de températures,   Classe N   : -65 °C à 200 °C
Classe W   : -65 °C à 175 °C
Classe K   : -65 °C à 260 °C
Classe A   : -65 °C à 260 °C
Classe T   : -65 °C à 175 °C (nickelé PTFE)
Classe Z   : -65 °C à 175 °C (zinc nickelé noir)

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 005. del: Kabelska spojka, tip A, 90°, netesnjena, z razbremenilno sponko - Standard za proizvod

General Information

Status
Not Published
Public Enquiry End Date
09-Sep-2020
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
01-Jul-2020
Due Date
18-Nov-2020
Completion Date
09-Sep-2020

RELATIONS

Buy Standard

Draft
oSIST prEN 3660-005:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 3660-005:2020
01-september-2020

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -

005. del: Kabelska spojka, tip A, 90°, netesnjena, z razbremenilno sponko -
Standard za proizvod

Aerospace series - Cable outlet accessories for circular and rectangular electrical and

optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief

- Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht
abgedichtet, mit Zugentlastungsklemme - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires

électriques et optiques - Partie 005 : Raccord, type A, coudé à 90°, non étanche, avec

brides serre-câbles - Norme de produit
Ta slovenski standard je istoveten z: prEN 3660-005
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3660-005:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3660-005:2020
---------------------- Page: 2 ----------------------
oSIST prEN 3660-005:2020
DRAFT
EUROPEAN STANDARD
prEN 3660-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 49.060 Will supersede EN 3660-005:2018+AC:2019
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 005:
Cable outlet, style A, 90°, unsealed with clamp strain relief
- Product standard

Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und

connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 005:

optiques - Partie 005 : Raccord coudé à 90° non Endgehäuse, Bauform A, 90° Ausführung, nicht

étanche type A avec brides serre-câbles - Norme de abgedichtet, mit Zugentlastungsklemme -

produit Produktnorm

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3660-005:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3660-005:2020
prEN 3660-005:2020 (E)
Contents Page

European foreword ............................................................................................................................................ 3

1 Scope .......................................................................................................................................................... 4

2 Normative references .......................................................................................................................... 4

3 Terms and definitions ......................................................................................................................... 4

4 Characteristics ....................................................................................................................................... 4

4.1 Dimensions and mass .......................................................................................................................... 4

4.2 Interface dimensions ........................................................................................................................... 7

4.2.1 Associated connection ......................................................................................................................... 7

4.2.2 Front interface ....................................................................................................................................... 7

4.3 Material and finish ................................................................................................................................ 8

4.4 Assembly torque .................................................................................................................................... 8

4.5 Couple thread strength torque ......................................................................................................... 8

4.6 Tests ........................................................................................................................................................... 9

5 Designation ........................................................................................................................................... 12

6 Marking ................................................................................................................................................... 12

7 Technical specification ..................................................................................................................... 12

Bibliography ........................................................................................................................................................ 13

---------------------- Page: 4 ----------------------
oSIST prEN 3660-005:2020
prEN 3660-005:2020 (E)
European foreword

This document (prEN 3660-005:2020) has been prepared by the Aerospace and Defence Industries

Association of Europe – Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3660-005:2018+AC:2019.
---------------------- Page: 5 ----------------------
oSIST prEN 3660-005:2020
prEN 3660-005:2020 (E)
1 Scope

This document defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use

under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N: −65 °C to 200 °C
Class W: −65 °C to 175 °C
Class K: −65 °C to 260 °C
Class A: −65 °C to 260 °C
Class T: −65 °C to 175 °C (nickel PTFE plating)
Class Z: −65 °C to 175 °C (black zinc nickel plating)
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2591 (all parts), Aerospace series - Elements of electrical and optical connection - Test methods

EN 3660-001, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical

connectors - Part 001: Technical specification

EN 3660-002, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical

connectors - Part 002: Index of product standards
3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3660-001 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• ISO Online browsing platform: available at https://www.iso.org/obp/ui
• IEC Electropedia: available at http://www.electropedia.org/
4 Characteristics
4.1 Dimensions and mass
For dimensions and mass, see Figur
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.