SIST EN 60081:1999/A3:2006

Double-capped fluorescent lamps - Performance specifications

Zweiseitig gesockelte Leuchtstofflampen - Anforderungen an die Arbeitsweise

Lampes à fluorescence à deux culots - Prescriptions de performance

Fluorescenčne sijalke z dvema vznožkoma – Zahteve glede tehničnih karakteristik (IEC 60081:1997/A3:2005)

General Information

• Status: Published
• Publication Date: 31-Dec-2005
• ICS: 29.140.30 - Fluorescent lamps. Discharge lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2006
• Due Date: 01-Jan-2006
• Completion Date: 01-Jan-2006
• Ref Project: EN 60081:1998/A3:2005 - Double-capped fluorescent lamps - Performance specifications

Relations

• Amends: SIST EN 60081:1999 - Double-capped fluorescent lamps - Performance specifications
• Effective Date: 01-Jan-2006
• Amends: SIST EN 60081:1999 - Double-capped fluorescent lamps - Performance specifications
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60081:1999/A3:2006

STANDARD
januar 2006
Fluorescenčne sijalke z dvema vznožkoma – Zahteve glede tehničnih
karakteristik (IEC 60081:1997/A3:2005)
(istoveten EN 60081:1998/A3:2005)
Double-capped fluorescent lamps – Performance specifications (IEC
60081:1997/A3:2005)
ICS 29.140.30 Referenčna številka
SIST EN 60081:1999/A3:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60081/A3
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2005

ICS 29.140.30


English version


Double-capped fluorescent lamps –
Performance specifications
(IEC 60081:1997/A3:2005)


Lampes à fluorescence à deux culots - Zweiseitig gesockelte Leuchtstofflampen -
Prescriptions de performance Anforderungen an die Arbeitsweise
(CEI 60081:1997/A3:2005) (IEC 60081:1997/A3:2005)


This amendment A3 modifies the European Standard EN 60081:1998; it was approved by CENELEC on
2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60081:1998/A3:2005 E

---------------------- Page: 2 ----------------------

EN 60081:1998/A3:2005 - 2 -
Foreword
The text of document 34A/1143/FDIS, future amendment 3 to IEC 60081:1997, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as amendment A3 to EN 60081:1998 on 2005-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-10-01
__________
Endorsement notice
The text of amendment 3:2005 to the International Standard IEC 60081:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI



INTERNATIONALE IEC


60081

INTERNATIONAL

AMENDEMENT 3

STANDARD
AMENDMENT 3

2005-09

Amendement 3
Lampes à fluorescence à deux culots –
Prescriptions de performance
Amendment 3
Double-capped fluorescent lamps –
Performance specifications
Les feuilles de cet amendement sont à insérer dans la
CEI 60081 (1997)
The sheets contained in this amendment are to be
inserted in IEC 60081 (1997)
 CEI 2005 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
K
International Electrotechnical Commission
PRICE CODE
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

INSTRUCTIONS POUR L’INSERTION INSTRUCTIONS FOR THE INSERTION
DES NOUVELLES FEUILLES OF NEW STANDARD SHEETS
DE NORMES DANS LA CEI 60081 (1997) IN IEC 60081 (1997)
__________ __________
1. Retirer les pages 2 des feuilles 1. Remove page 2 of sheets
60081-IEC-6520  60081-IEC-6520
60081-IEC-6530 60081-IEC-6530
60081-IEC-6620 60081-IEC-6620
60081-IEC-6640 60081-IEC-6640
60081-IEC-6650 60081-IEC-6650
60081-IEC-6730 60081-IEC-6730
60081-IEC-6750 60081-IEC-6750
60081-IEC-6840 60081-IEC-6840
60081-IEC-6850 60081-IEC-6850
et insérer les nouvelles pages 2 des and insert the following new page 2 of
feuilles suivantes: sheets:
60081-IEC-6520  60081-IEC-6520
60081-IEC-6530 60081-IEC-6530
60081-IEC-6620 60081-IEC-6620
60081-IEC-6640 60081-IEC-6640
60081-IEC-6650 60081-IEC-6650
60081-IEC-6730 60081-IEC-6730
60081-IEC-6750 60081-IEC-6750
60081-IEC-6840 60081-IEC-6840
60081-IEC-6850 60081-IEC-6850

___________

---------------------- Page: 5 ----------------------

60081 Amend. 3 © CEI/IEC:2005

AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34A : Lampes, du comité d'études 34
de la CEI: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
34A/1143/FDIS 34A/1147/RVD

Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote
ayant abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de cet amendement et de la publication de base ne sera
pas modifié avant la date de maintenance indiquée sur le site web de la CEI sous
"http://webstore.iec.ch" dans les données relatives à la publication recherchée. A cette date,
la publication sera
• reconduite,
• supprimée,
• remplacée par une édition révisée, ou
• amendée.
_____________
FOREWORD
This amendment has been prepared by subcommittee 34A Lamps, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/1143/FDIS 34A/1147/RVD

Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________

---------------------- Page: 6 ----------------------

NORME CEI

INTERNATIONALE IEC



60081
INTERNATIONAL

Edition 5.3
STANDARD



2005-10



Edition 5, modifiée selon les amendements 1 (2000), 2 (2003) et 3 (2005)

Edition 5, amended in accordance with amendments 1 (2000), 2 (2003) and 3 (2005)


Lampes à fluorescence à deux culots –
Prescriptions de performance

Double-capped fluorescent lamps –
Performance specifications

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия

---------------------- Page: 7 ----------------------

60081  IEC:1997        – 3 –
CONTENTS
FOREWORD. 5
1 General . I-2
1.1 Scope. I-2
1.2 Statement. I-2
1.3 Normative references . I-2
1.4 Definitions . I-4
1.5 Lamp requirements. I-6
1.6 Information for ballast and starter design . I-10
1.7 Information for luminaire design. I-10
Annexes
A Method of test for starting characteristics . A-2
B Method of test for electrical, photometric and cathode characteristics. B-2
C Method of test for lumen maintenance and life . . C-2
D Chromaticity co-ordinates . D-2
E Information for ballast and starter design. . E-2
F Information for luminaire design . F-2
2 Data sheets . II-2
2.1 General principles of numbering of data sheets. II-2
2.2 Diagrammatic data sheets for location of lamp dimensions. II-2
2.3 Lamp data sheets . II-4

---------------------- Page: 8 ----------------------

60081 © IEC:1997+A1:2000+A2:2003 – 5 –
+A3:2005

INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

DOUBLE-CAPPED FLUORESCENT LAMPS –
PERFORMANCE SPECIFICATIONS



FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60081 has been prepared by subcommittee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
This consolidated version of IEC 60081 is based on the fifth edition (1997) [documents
34A/759/FDIS and 34A/778/RVD], its amendment 1 (2000) [documents 34A/896/FDIS and
34A/907/RVD], its amendment 2 (2003) [documents 34A/1020/FDIS and 34A/1028/RVD] and
its amendment 3 (2005) [documents 34A/1143/FDIS and 34A/1147/RVD].
It bears the edition number 5.3.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 9 ----------------------

60081 Amend. 3 © IEC:2005



DOUBLE-CAPPED FLUORESCENT LAMP


Page 2


DATA SHEET




 ILCOS: FDH-14-L/P-G5-16/550
Reference ballast characteristics
Frequency Nominal wattage Rated voltage Calibration current Resistance
kHz W V A Ω
20 - 26 14 167 0,170 500

Information for high frequency ballast design
Frequency kHz kHz
≥ 20
Current in any lead to cathodes A Max. 0,220
Lamp operating current A Min. 0,130
Max. 0,205

Starting requirements with cathode preheating, for starting times 0,4 s < t < 3,0 s
s
Minimum cathode preheat energy (J) : E = Q + P t Q (J) 0,9
min s
P (W) 0,75
Maximum cathode preheat energy (J) : E = F x E F 1,75
max min
Voltage across each cathode for E(t) < E V Max.(r.m.s.) 10
min
30
Substitution resistor for each cathode, for testing cathode preheat requirements Ω
Op
...