CEN/TC 256/WG 33 - Coupling devices

This document specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability Locomotives and Passenger rolling stock (TSI Loc & Pas).
This document defines the rescue coupler foreseen to connect rescue vehicle equipped with draw hook, according to EN 15566 together with the train to be rescued equipped with Type 10 automatic coupler according to EN 16019.

This document specifies the requirements for the draw gear and screw coupling for the end of rolling stock that is bound to couple with other rolling stock (freight wagons, locomotives, passenger vehicles, etc.).
This document covers the functionality, construction, interfaces and testing including pass/fail criteria for draw gear and screw coupling.
The document describes three categories of classification of draw gear and screw coupling, (1 MN, 1,2 MN and 1,5 MN).
Coupling systems between permanently coupled vehicle units are not in the scope of this document.

This document defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling. It covers the functionality, interfaces and testing procedures, including pass fail criteria, for buffers.
NOTE 1   Typically, buffers with a stroke of 105 mm are used on freight wagons and locomotives, buffers with a stroke of 110 mm are used on coaches and locomotives and buffers with a stroke of 150 mm are used on freight wagons.
It defines the different categories of buffers, the space envelope, static and dynamic characteristics and energy absorption.
It defines the static and dynamic characteristics of the elastic systems.
It also defines the requirements for buffers with integrated crash elements (crashworthy buffers) for tank wagons for dangerous goods.
The requirements of this document also apply to buffers of locomotives and passenger coaches which are bound to meet the crashworthiness requirements of EN 15227 for normal service only. The properties for the energy absorbing function are defined in EN 15227 and the requirements specified in Clause 7 for tank wagons for dangerous goods are not applicable to the buffers of these locomotives and passenger coaches.
Diagonal buffers are excluded from this document.
For the crashworthy buffers of locomotives, cab cars or passenger coaches according to EN 15227, and tank wagons for dangerous goods or buffers which form part of a combined system consisting of a special buffer and a deformation element, interchangeability with freight wagon buffers is not required, and therefore the requirements of 5.3 (Buffer dimensions) do not apply, those of 5.4 (Mechanical characteristics of buffers) and 5.6 (Marking) apply with restrictions.
NOTE 2   For tank wagons subjected to dangerous goods regulation see [35].

This document is applicable to vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this document specifies the
defined free space for the shunter called the "Berne rectangle" and the necessary free space for
the installation of the rescue coupler.
This document specifies the location, fixing and free spaces on the headstock of:
- buffers;
- screw coupling systems;
- end cocks;
- pneumatic half couplings;
- connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this document are nominal values.

The purpose of this document is to analyse the conducted investigation and evaluation of lateral displacement and buffer overlap between each two specified vehicles of different train sets for defined running cases in curves.
For this purpose, the types of vehicles defining the train sets and different operating conditions are specified. Position of the vehicles on the track at the moment of maximum lateral displacement (minimum buffer overlap) is recorded during the calculation.
The worst cases of lateral displacement and buffer overlap between two coupled vehicles as well as relation to formulae in EN 15551:2009 are analysed.

This European Standard specifies the requirements for Type 10 automatic couplers for railway applications.
It defines the minimum interface requirements in order to allow automatic coupling (mechanical and pneumatic) of two Type 10 automatic couplers.
The interfaces of the end coupler specified in this European Standard:
-   enable the rescue of a train set in an event of a breakdown by another trainset of different type, without the need to use an intermediate coupler adapter, accessories or component;
-   are the reference interfaces to which the rescue coupler defined by EN 15020 will comply.
It does not define:
-   interface requirements concerning electrical connections;
-   clearance requirements around the coupler head;
-   the height above top of rail for the coupler;
-   the position of the pivot point of the coupler.

This document is applicable to vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this document specifies the
defined free space for the shunter called the "Berne rectangle" and the necessary free space for
the installation of the rescue coupler.
This document specifies the location, fixing and free spaces on the headstock of:
- buffers;
- screw coupling systems;
- end cocks;
- pneumatic half couplings;
- connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this document are nominal values.

The European standard specifies the requirements for the end coupler for train sets compliant with the technical specification for Interoperability High Speed Rolling stock.
It defines the minimum interface requirements in order to allow automatic coupling (mechanical and pneumatical) of two interoperable train sets of different types.
The herein specified interfaces of the end coupler enable the rescue of a train set in an event of a breakdown by another interoperable train set of different type, without the need to use an intermediate coupler adapter, accessories or component.

This European Standard defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling at the coupling interface with other interoperable rolling stock. It covers the functionality, interfaces and testing procedures, including pass fail criteria, for buffers.

This standard specifies the requirement of the draw gear and screw coupling for the end rolling stock which have to couple with other interoperable rolling stock (freight wagons, locomotives, passenger vehicles ...). This standard covers the functionality construction, interfaces, testing including pass fail criteria for draw gear and screw coupling.

This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations.

This European Standard is valid for vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this European Standard specifies the defined free space for the shunter called the "Berne rectangle" and the necessary free space for the installation of the rescue coupler.
This European Standard specifies the location, fixing and free spaces on the headstock of:
-   buffers;
-   screw coupling systems;
-   end cocks;
-   pneumatic half couplings;
-   connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this European Standard are nominal values.
NOTE   Some parts of this EN are copied from EN 16116-1, EN 16116-2, EN 15551 and EN 15566. These parts are meant to be deleted from these ENs during their next revision.

This European Standard defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling. It covers the functionality, interfaces and testing procedures, including pass fail criteria, for buffers.
NOTE 1   Typically, buffers with a stroke of 105 mm are used on freight wagons and locomotives, buffers with a stroke of 110 mm are used on coaches and locomotives and buffers with a stroke of 150 mm are used on freight wagons.
It defines the different categories of buffers, the space envelope, static and dynamic characteristics and energy absorption.
It includes a calculation method to determine the minimum size of the buffer head to avoid override between buffers.
It defines the static and dynamic characteristics of the elastic systems.
It also defines the requirements for buffers with integrated crash elements (crashworthy buffers) for tank wagons for dangerous goods.
The requirements of this European Standard also apply to buffers of locomotives and passenger coaches which need to meet the crashworthiness requirements of EN 15227 for normal service only. The properties for the energy absorbing function are defined in EN 15227 and the requirements specified in Clause 7 for tank wagons for dangerous goods are not applicable to the buffers of these locomotives and passenger coaches.
Diagonal buffers are excluded from this European Standard.
For the crashworthy buffers of locomotives, cab cars or passenger coaches according to EN 15227, and tank wagons for dangerous goods or buffers which form part of a combined system consisting of a special buffer and a deformation element, interchangeability with freight wagon buffers is not required, and therefore the requirements of 5.2 (Fixing on vehicle and interchangeability), 5.3 (Buffer dimensions) do not apply, those of 5.4 (Mechanical characteristics of buffers) and 5.6 (Marking) apply with restrictions.
NOTE 2   For tank wagon subjected to dangerous goods regulation, see [35].

This standard specifies the requirements for the draw gear and screw coupling for the end of rolling stock that has to couple with other rolling stock (freight wagons, locomotives, passenger vehicles ...).
This standard covers the functionality, construction, interfaces and testing including pass/fail criteria for draw gear and screw coupling.
The standard describes three categories of classification of draw gear and screw coupling, (1 MN, 1,2 MN and 1,5 MN).
Permanent coupling systems are not in the scope of this standard.

This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading. )
Provisions going beyond the scope of this European Standard need to be agreed upon by the contracting parties involved.

This European Standard defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling at the coupling interface with other interoperable rolling stock. It covers the functionality, interfaces and testing procedures, including pass fail criteria, for buffers.
NOTE   Typically, buffers with a stroke of 105 mm are used on freight wagons and locomotives, buffers with a stroke of 110 mm are used on coaches and locomotives and buffers with a stroke of 150 mm are used on freight wagons.
It defines the different categories of buffers, the space envelope, static and dynamic characteristics and energy absorption.
It includes a calculation method to determine the minimum size of the buffer head to avoid override between buffers.
It defines the static and dynamic characteristics of the elastic systems.
It also defines the requirements for buffers with integrated crash elements (crashworthy buffers) for tank wagons only according to RID.
The requirements of this European Standard also apply to locomotives and passenger coaches which have to meet the crashworthiness requirements of EN 15227 for buffers in normal service only. The properties for the energy absorbing function are defined in EN 15227 and the requirements specified in Clause 7 for tank wagons according to RID are not applicable to locomotives and passenger coaches.
Diagonal buffers are excluded from this European Standard.
For vehicles which have to comply with crashworthiness requirements (locomotives, cab cars or passenger coaches according to EN 15227, tank wagons according to RID), typically crashworthy buffers (buffers with a deformable housing and/or the need for an opening in their mounting flange) or buffers which form part of a combined system consisting of a special buffer (e.g. middle flange buffer) and a deformation element are used.

This standard specifies the requirement of the draw gear and screw coupling for the end rolling stock which have to couple with other interoperable rolling stock (freight wagons, locomotives, passenger vehicles ...).
This standard covers the functionality construction, interfaces, testing including pass fail criteria for draw gear and screw coupling.
The standard describes three categories of classification of draw gear and screw coupling, (1 MN, 1,2 MN and 1,5 MN).

This European Standard defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling at the coupling interface with other interoperable rolling stock. It covers the functionality, interfaces and testing procedures, including pass fail criteria, for buffers.
NOTE   Typically, buffers with a stroke of 105 mm are used on freight wagons and locomotives, buffers with a stroke of 110 mm are used on coaches and locomotives and buffers with a stroke of 150 mm are used on freight wagons.
It defines the different categories of buffers, the space envelope, static and dynamic characteristics and energy absorption.
It includes a calculation method to determine the minimum size of the buffer head to avoid override between buffers.
It defines the static and dynamic characteristics of the elastic systems.
It also defines the requirements for buffers with integrated crash elements (crashworthy buffers) for tank wagons only according to RID.
The requirements of this European Standard also apply to locomotives and passenger coaches which have to meet the crashworthiness requirements of EN 15227 for buffers in normal service only. The properties for the energy absorbing function are defined in EN 15227 and the requirements specified in Clause 7 for tank wagons according to RID are not applicable to locomotives and passenger coaches.
Diagonal buffers are excluded from this European Standard.
For vehicles which have to comply with crashworthiness requirements (locomotives, cab cars or passenger coaches according to EN 15227, tank wagons according to RID), typically crashworthy buffers (buffers with a deformable housing and/or the need for an opening in their mounting flange) or buffers which form part of a combined system consisting of a special buffer (e.g. middle flange buffer) and a deformation element are used. For these types of buffers, interoperability is possible, but interchangeability with freight wag

This standard specifies the requirement of the draw gear and screw coupling for the end rolling stock which have to couple with other interoperable rolling stock (freight wagons, locomotives, passenger vehicles ...).
This standard covers the functionality construction, interfaces, testing including pass fail criteria for draw gear and screw coupling.
The standard describes three categories of classification of draw gear and screw coupling, (1 MN, 1,2 MN and 1,5 MN).

This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading. )
Provisions going beyond the scope of this European Standard need to be agreed upon by the contracting parties involved.