Health informatics - Business requirements for a syntax to exchange structured dose information for medicinal products (ISO/TS 17251:2023)

This document specifies the business requirements for the structured content of structured or semi-
structured dose instructions for recording dose instructions in the electronic health record (EHR),
supporting clinical decision support, and in exchanging medication orders, as applicable to primary,
secondary and tertiary care.
This document is focused on the dose instructions as will be presented to the individual subject of care
or caregiver. Comprehension of dose instructions by the subject of care or caregiver is an overarching
consideration for subject of care safety and the best outcomes. Related factors are discussed but are not
part of the primary scope.
This document does not define an information model, except to the extent that those information model
concepts are necessary to define business requirements.
Outside the scope of this document are:
— The implementation of dose instructions, i.e. assembling the structured elements into a form
appropriate for the patient or caregiver;
— The content of a medication order (see ISO 17523) beyond content related to dose instructions;
— The content of a record of dispense of a medicinal product (see ISO/TS 19293);
— The functionality of health, clinical and/or pharmacy systems;
— Other kinds of content of health, clinical or pharmacy systems that are needed to support the whole
process of health care providers, such as:
— A drug knowledge database (see ISO/TS 22756);
— A decision support system (see ISO/TS 22756 and ISO/TS 22703);
— A complete medical record (EHR);
— A medicinal product dictionary (see ISO/TS 19256);
— Verification of the medicinal product and dose being administered.
— Some concepts from Identification of Medicinal Products are referenced, but not defined, in this
document. See Clause 4 for discussion of the relationship of this document with IDMP.

Medizinische Informatik - Geschäftsanforderungen an eine Syntax zum Austausch von Dosierungsinformationen für Arzneimittel (ISO/TS 17251:2023)

Informatique de santé - Exigences d'affaire pour une syntaxe d'échange d'informations de dose structurée pour les produits médicaux (ISO/TS 17251:2023)

Zdravstvena informatika - Poslovne zahteve za sintakso za izmenjavo strukturiranih podatkov o odmerkih za zdravila (ISO/TS 17251:2023)

Ta dokument določa poslovne zahteve za strukturirano vsebino strukturiranih ali polstrukturiranih navodil za odmerke za shranjevanje navodil za odmerke v elektronski zdravstveni zapis (EHR), zagotavljanje podpore za klinično odločanje ter uporabo v izmenjavi naročil zdravil, kot se uporabljajo v primarni, sekundarni in terciarni oskrbi.
Ta dokument se osredotoča na navodila za odmerke in bo predstavljen posameznemu oskrbovancu ali negovalcu. Oskrbovančevo oziroma negovalčevo razumevanje navodil za odmerke je najpomembnejši vidik za zagotavljanje oskrbovančeve varnosti in najboljših rezultatov zdravljenja. Obravnavani so povezani dejavniki, ki pa niso del primarnega področja uporabe.
Ta dokument ne določa informacijskega modela, razen v obsegu, v katerem so ti koncepti informacijskega modela potrebni za opredelitev poslovnih zahtev.
Področje uporabe tega dokumenta ne vključuje:
– Izvajanje navodil za odmerke, tj. sestavljanje strukturiranih elementov v obliki, ki ustreza bolniku ali negovalcu;
– Vsebina naročila zdravila (glej standard ISO 17523) zunaj vsebine v zvezi z navodili za odmerke;
– Vsebina zapisov o izdaji zdravila (glej standard ISO/TS 19293);
– Funkcionalnost zdravstvenih, kliničnih in/ali lekarniških sistemov;
– Druge vrste vsebin zdravstvenih, kliničnih ali lekarniških sistemov, ki so potrebne za zagotavljanje podpore za celoten postopek ponudnikov zdravstvenih storitev, kot so:
– Podatkovna zbirka znanja o zdravilih (glej standard ISO/TS 22756);
– Sistem za zagotavljanje podpore za sprejemanje odločitev (glej standarda ISO/TS 22756 in ISO/TS 22703);
– Celovit elektronski zdravstveni zapis;
– Slovar zdravil (glej ISO/TS 19256);
– Preverjanje količine uporabljenega zdravila in odmerka.
– V tem dokumentu so referenčno navedeni nekateri koncepti iz identifikacije medicinskih izdelkov, vendar niso opredeljeni. Glej točko 4 za obravnavo razmerja med tem dokumentom in standardom za identifikacijo medicinskih izdelkov.

General Information

Status
Published
Publication Date
14-Mar-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Mar-2023
Completion Date
15-Mar-2023

Relations

Buy Standard

Technical specification
TS CEN ISO/TS 17251:2023
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2023
Nadomešča:
SIST-TS CEN ISO/TS 17251:2017
Zdravstvena informatika - Poslovne zahteve za sintakso za izmenjavo
strukturiranih podatkov o odmerkih za zdravila (ISO/TS 17251:2023)
Health informatics - Business requirements for a syntax to exchange structured dose
information for medicinal products (ISO/TS 17251:2023)
Medizinische Informatik - Geschäftsanforderungen an eine Syntax zum Austausch von
Dosierungsinformationen für Arzneimittel (ISO/TS 17251:2023)
Informatique de santé - Exigences d'affaire pour une syntaxe d'échange d'informations
de dose structurée pour les produits médicaux (ISO/TS 17251:2023)
Ta slovenski standard je istoveten z: CEN ISO/TS 17251:2023
ICS:
11.120.10 Zdravila Medicaments
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 17251
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
March 2023
TECHNISCHE SPEZIFIKATION
ICS 35.240.80 Supersedes CEN ISO/TS 17251:2016
English Version
Health informatics - Business requirements for a syntax to
exchange structured dose information for medicinal
products (ISO/TS 17251:2023)
Informatique de santé - Exigences d'affaire pour une Medizinische Informatik - Geschäftsanforderungen an
syntaxe d'échange d'informations de dose structurée eine Syntax zum Austausch von
pour les produits médicaux (ISO/TS 17251:2023) Dosierungsinformationen für Arzneimittel (ISO/TS
17251:2023)
This Technical Specification (CEN/TS) was approved by CEN on 24 February 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 17251:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (CEN ISO/TS 17251:2023) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 17251:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 17251:2023 has been approved by CEN as CEN ISO/TS 17251:2023 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 17251
Second edition
2023-02
Health informatics — Business
requirements for a syntax to exchange
structured dose information for
medicinal products
Informatique de santé — Exigences d'affaire pour une syntaxe
d'échange d'informations de dose structurée pour les produits
médicaux
Reference number
ISO/TS 17251:2023(E)
ISO/TS 17251:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 17251:2023(E)
Contents Page
Foreword .iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Relationship to other ISO deliverables . 4
5 Conformance . 5
6 Business requirements for structured dose instructions . 5
6.1 General . 5
6.2 Use cases . 5
6.3 Elements of a dose instruction . 5
6.4 Information requirements . 7
6.4.1 General . 7
6.4.2 Terminologies and Code Systems . 7
6.4.3 Information model . 7
6.4.4 Text representation. 8
6.4.5 Administration amount . 8
6.4.6 Route/site of administration . 9
6.4.7 Timing of dose event(s). 9
6.4.8 Conditional administration . 11
6.4.9 Subject of care-specific information . 11
6.4.10 Ancillary information .12
Bibliography .14
iii
ISO/TS 17251:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 215, Health informatics, in collaboration
with the European Committee for Standardization (CEN) Technical Committee CEN/TC 251, Health
informatics, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This second edition cancels and replaces the first edition (ISO/TS 17251:2016), which has been
technically revised.
The main changes are as follows:
— editorial corrections and clarifications;
— added Clause 4 on the relationship to other standards;
— updated Clause 3;
— Clause 4 includes discussion on the relationship to the IDMP standards and clarifies the use of IDMP
terms;
— Subclause 6.4.9: removed height, added optional laboratory observations;
— Subclause 6.4.5 and 6.4.7.1 for elements described as a range (e.g. max/min dose, range for interval
or frequency) added discussion of 2-term and 3-term representations;
— Subclause 6.4.1: added discussion on complex instructions (e.g. multiple schedules, multiple dose
amounts);
— Subclause 6.4.5: clarified language around selection of unit of measurement versus unit of
presentation;
— Subclause 6.4.8: clarified that conditional administration is not necessarily the indication for the
medication order;
iv
ISO/TS 17251:2023(E)
— Subclause 6.4.9.4: added capability to provide date and/or time for subject of care characteristics;
— Subclause 6.4.4.1: added description and conformance for administration method;
— Subclause 6.4.7.1: added the option to have frequency based upon a period of time, such as “2 times
over 3 days”.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.