Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017)

The ISO 16410 series provides a suite of tests in order to assess compliance of the Front End and Back End behaviours in relation to the requirements in ISO 17575‑3. ISO 16410-1:2017 contains the definition of such tests in the form of test purposes, listing the required initial conditions, references and individual steps in a structured textual manner. ISO 16410‑2 contains the identical tests written in testing and test control notation version 3 (TTCN v3).
The test purposes defined in ISO 16410-1:2017 reflect the structural and semantic requirements stated in ISO 17575‑3.
-      Presence/absence of particular data elements (see ISO 17575‑3:2016, 8.5.5);
-      Semantics related to various data elements, e.g.:
-     Activation of context data and handling multiple contexts (see ISO 17575‑3:2016, 8.3);
-     Handling the precedence and priority levels (see ISO 17575‑3:2016, 8.5.2 to 8.5.4);
-     Uniqueness of relevant data elements (see ISO 17575‑3:2016, 8.5.2 to 8.5.4);
-     Correct definition of the charge objects (see ISO 17575‑3:2016, 8.5.4);
-      Fee calculation algorithm (see ISO 17575‑3:2016, 8.5.3.7);
-      Security (see ISO 17575‑3:2016, 7.2).
With regard to the individual data sets and EFC attributes defined in ISO 17575‑3, the test purposes have been organized into the test suite groups, designated for the Front End and Back End respectively.
In addition to the test purposes, ISO 16410-1:2017 also provides proforma conformance test report templates for both the Front End and Back End test purposes and an informative statement on the usage of ISO 16410-1:2017 for the European electronic toll service (EETS).
For more information regarding the requirements against which the conformance is evaluated in ISO 16410-1:2017, refer to ISO 17575‑3.
Testing of the following behaviours and functionalities is outside the scope of ISO 16410-1:2017:
-      dynamic behaviour, i.e. sequence of messages and triggering events that must be exchanged/happen to fulfil certain charging scenarios;
-      profiles and business logic built on top of particular pricing schemas;
-      behaviour invalid of Front End and Back End, BI test purposes are not applicable for any test purpose group (as ISO 17575‑3 does not specify behaviour invalid).

Elektronische Gebührenerhebung - Konformitätsbeurteilung von Geräten nach ISO 17575-3 - Teil 1: Struktur und Zweck des Prüfprogramms (ISO 16410-1:2017)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 - Partie 1: Structure de la suite d'essais et objectifs des essais (ISO 16410-1:2017)

Les normes ISO 16410 ont pour domaine d'application la fourniture d'une série d'essais ayant pour but d'évaluer la conformité des comportements du système frontal et du système central par rapport aux exigences énumérées dans l'ISO 17575‑3. Le présent document contient la définition de tels essais sous forme de buts d'essais, donnant la liste des conditions initiales requises, des références et des étapes individuelles, d'une manière textuelle structurée. La Partie 2 de l'ISO 16410 contient les essais identiques écrits dans la version 3 de Notation des essais et des contrôles d'essais (TTCN v3).
Les buts d'essais définis dans le présent document reflètent les exigences structurelles et sémantiques exprimées dans l'ISO 17575‑3:
-      Présence / absence d'éléments de données particuliers (voir ISO 17575‑3, paragraphe 8.5.5)
-      Sémantique relative à divers éléments de données, comme par exemple:
-     Activation de données de contexte et gestion de contextes multiples (voir ISO 17575‑3, paragraphe 8.3)
-     Gestion des niveaux de priorité (voir ISO 17575‑3, paragraphes 8.5.2 à 8.5.4)
-     Unicité des éléments de données importants (voir ISO 17575‑3, paragraphes 8.5.2 à 8.5.4)
-     Définition correcte des objets imputés (voir ISO 17575‑3, paragraphe 8.5.4)
-      Algorithme de calcul des redevances (voir ISO 17575‑3, paragraphe 8.5.3.7)
-      Sécurité (voir ISO 17575‑3, paragraphe 7.2)
En ce qui concerne les éléments de données individuels et les attributs EFC définis dans l'ISO 17575‑3, les buts d'essais ont été organisés dans les groupes de suites d'essais désignés, respectivement, pour le système frontal et le système central.
Outre les buts d'essais, le présent document donne également des formulaires de rapports d'essais de conformité à la fois pour le système frontal et le système central, ainsi qu'une déclaration à caractère informatif sur l'utilisation du présent document pour le SET.
Pour en savoir davantage sur les exigences par rapport auxquelles la conformité est évaluée dans le présent document, voir l'ISO 17575‑3.
Les essais des fonctionnalités et comportements suivants ne fait pas partie du domaine d'application de l'ISO 16410-1:2017:
-      comportement dynamique, c'est-à-dire séquence de messages et événements de déclenchement devant être échangés / pouvant parfois satisfaire certains scénarios d'imputation;
-      profils et logique d'entreprise construite au-dessus de schémas de tarification particuliers;
-      L'ISO 17575‑3 ne spécifiant aucun comportement invalide du système frontal et du système central, les buts d'essais BI (comportement invalide) ne s'appliquent à aucun groupe de buts d'essais.

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 - 1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO 16410-1:2017)

Skupina standardov ISO 16410 zagotavlja preskuševalni niz za ocenjevanje skladnosti obnašanj čelnega in zalednega
dela v zvezi z zahtevami iz standarda ISO 17575-3. Ta dokument vsebuje določitev takšnih preskusov v obliki namenov preskušanja in pri tem na strukturiran način v besedi navaja zahtevane začetne pogoje, reference in posamezne korake. Standard ISO 16410-2 vsebuje identične preskuse, zapisane v 3. različici zapisa preskušanja in krmilnih preskusov (TTCN v3).
Nameni preskušanja, ki so opredeljeni v tem dokumentu, odražajo strukturne in semantične zahteve, podane v standardu
ISO 17575-3:
– prisotnost/odsotnost posebnih podatkovnih elementov (glej ISO 17575-3:2016, 8.5.5);
– semantika, povezana z različnimi podatkovnimi elementi, npr.:
– aktivacija podatkov iz sobesedila in obravnava več sobesedil (glej ISO 17575-3:2016, 8.3);
– obravnava precedence in prednostnih ravni (glej ISO 17575-3:2016, 8.5.2 do 8.5.4);
– edinstvenost posebnih podatkovnih elementov (glej ISO 17575-3:2016, 8.5.2 do 8.5.4);
– pravilna opredelitev objektov zaračunavanja (glej ISO 17575-3:2016, 8.5.4);
– algoritem za izračun pristojbin (glej ISO 17575-3:2016, 8.5.3.7);
– varnost (glej ISO 17575-3:2016, 7.2).
Glede na posamezne nabore podatkov in atribute elektronskega pobiranja pristojbin (EFC), določene v standardu ISO 17575-3, so nameni preskušanja urejeni po skupinah preskuševalnih nizov, ki so zasnovani za čelni del ali za zaledni del.
Ta dokument poleg namenov preskušanja določa tudi predloge za poročila o proformnem preskušanju skladnosti za namene preskušanja čelnega in zalednega dela ter za informativne izjave o uporabi tega dokumenta za evropski sistem elektronskega cestninjenja (EETS).
Za več informacij glede zahtev, na podlagi katerih se vrednoti skladnost v tem dokumentu, glej standard ISO 17575-3.
Preskušanje obnašanj in funkcionalnosti v nadaljevanju ne spada na področje uporabe tega dokumenta:
– dinamično obnašanje, npr. zaporedje sporočil in sprožilnih dogodkov, ki se morajo izmenjati/zgoditi za uresničitev določenih scenarijev zaračunavanja;
– profili in poslovna logika, grajeni na posameznih cenovnih shemah;
– neveljavno obnašanje čelnega in zalednega dela, nameni preskušanja za neveljavna obnašanja se ne uporabljajo za nobeno skupino namenov preskušanj (ker standard ISO 17575-3 ne določa neveljavnega obnašanja).

General Information

Status
Withdrawn
Publication Date
12-Dec-2017
Withdrawal Date
08-Aug-2023
Current Stage

Relations

Buy Standard

Standard
EN ISO 16410-1:2018
English language
172 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 16410-1:2011
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 -
1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO 16410-1:2017)
Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1:
Test suite structure and test purposes (ISO 16410-1:2017)
Elektronische Gebührenerhebung - Konformitätsevaluierung von Geräten nach ISO
17575-3 - Teil 1: Struktur der Testfolge und Testabsichten (ISO 16410-1:2017)
Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 -
Partie 1: Structure de la suite d'essais et objectifs des essais (ISO 16410-1:2017)
Ta slovenski standard je istoveten z: EN ISO 16410-1:2017
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16410-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 16410-1:2011
English Version
Electronic fee collection - Evaluation of equipment for
conformity to ISO 17575-3 - Part 1: Test suite structure
and test purposes (ISO 16410-1:2017)
Perception du télépéage - Évaluation de la conformité Elektronische Gebührenerhebung -
de l'équipement à l'ISO 17575-3 - Partie 1: Structure de Konformitätsbeurteilung von Geräten nach ISO/TS
la suite d'essais et objectifs des essais (ISO 16410- 17575-3 - Teil 1: Struktur und Zweck des
1:2017) Prüfprogramms (ISO 16410-1:2017)
This European Standard was approved by CEN on 12 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16410-1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 16410-1:2017) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 16410-1:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16410-1:2017 has been approved by CEN as EN ISO 16410-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 16410-1
First edition
2017-11
Electronic fee collection — Evaluation
of equipment for conformity to ISO
17575-3 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation de la conformité de
l'équipement à l'ISO 17575-3 —
Partie 1: Structure de la suite d'essais et objectifs des essais
Reference number
ISO 16410-1:2017(E)
©
ISO 2017
ISO 16410-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 16410-1:2017(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Test suite structure . 5
5.1 Structure . 5
5.2 Reference to conformance test specifications . 6
5.3 Test purposes (TP) . 6
5.3.1 TP definition conventions . 6
5.3.2 TP naming conventions . 7
5.4 Conformance test report . 8
Annex A (normative) Test purposes (TP) for Front End . 9
Annex B (normative) Test purposes (TP) for Back End .96
Annex C (normative) Data structures .133
Annex D (normative) PCTR for Front End .154
Annex E (normative) PCTR for Back End .159
Bibliography .163
ISO 16410-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
The document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
This first edition of ISO 16410-1 cancels and replaces the first edition of ISO/TS 16410-1:2011, which
has been technically revised.
The following changes have been made:
— this document has been converted from a Technical Specification to an International Standard;
— amendments have been made to reflect changes to the underlying base standards, especially
ISO 17575 (all parts);
— major changes have been made regarding:
— data element changes introduced by ISO 17575-1 and ISO 17575-3;
— new test purposes related to:
— protocol version handling;
— toll context partitions;
— fee calculation algorithm;
— rounding rules;
— alternative currency;
— test purposes related to the following have been removed:
— communications services;
iv © ISO 2017 – All rights reserved

ISO 16410-1:2017(E)
— rules with respect to support of context data which are no longer required by ISO 17575-3;
— the terms and definitions have been revised;
— editorial and formal corrections, as well as changes to improve readability, have been made.
ISO 16410-1:2017(E)
Introduction
This document is part of a series of standards that supports interoperability of autonomous EFC-
systems. Autonomous systems use satellite positioning, often combined with additional sensor
technologies such as gyroscopes, odometers and accelerometers, to localize the vehicle and to find its
position on a map containing the charged geographic objects, such as charged roads or charged areas.
From the charged objects, the vehicle characteristics, the time of day and other data that are relevant
for describing road use, the tariff and ultimately, the road usage fee is determined.
Autonomous on-board equipment (OBE) operates without relying on dedicated road-side infrastructure
by employing wide-area technologies such as global navigation satellite systems (GNSS) and cellular
communications networks (CN). Therefore, autonomous systems may also be referred to as GNSS/CN
systems.
Within the series of EFC standards, this document defines tests for conformity evaluation of F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.