EN 62025-2:2005

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

Specifies a test method for the non-electrical characteristics of the surface mounted device inductors to be used for electronic and telecommunication equipment. Defines methods for measuring mechanical performance only. To be used in conjunction with EN 62211.

Induktive Hochfrequenzbauelemente - Nichtelektrische Eigenschaften und Messmethoden - Teil 2: Messverfahren für nichtelektrische Eigenschaften

Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes de mesure - Partie 2: Méthodes d'éssai pour caractéristiques non électriques

Spécifie une méthode d'essai pour les caractéristiques non électriques pour inductances à montage en surface utilisées pour les équipements électroniques et de télécommunications. Concerne uniquement les méthodes de mesure de la performance mécanique. Est à utiliser conjointement avec la EN 62211.

Visokofrekvenčne induktivne komponente – Neelektrične karakteristike in merilne metode – 2. del: Preskusne metode za neelektrične karakteristike (IEC 62025-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 27-Feb-2005
• Withdrawal Date: 31-Jan-2008
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Parallel Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Oct-2022
• Completion Date: 25-Oct-2022
• Ref Project: SIST EN 62025-2:2005 - High frequency inductive components - Non-electrical characteristics and measuring methods -- Part 2: Test methods for non-electrical characteristics

Relations

• Replaced By: EN IEC 62025-2:2019 - High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 62025-2:2005

STANDARD
december 2005
Visokofrekvenčne induktivne komponente – Neelektrične karakteristike in
merilne metode – 2. del: Preskusne metode za neelektrične karakteristike (IEC
62025-2:2005)
High frequency inductive components – Non-electrical characteristics and
measuring methods – Part 2: Test methods for non-electrical characteristics (IEC
62025-2:2005)
ICS 29.100.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 62025-2
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005

ICS 29.100.10
English version
High frequency inductive components –
Non-electrical characteristics and measuring methods
Part 2: Test methods for non-electrical characteristics
(IEC 62025-2:2005)
Composants inductifs à haute fréquence - Induktive Hochfrequenzbauelemente -
Caractéristiques non électriques Nichtelektrische Eigenschaften
et méthodes de mesure und Messmethoden
Partie 2: Méthodes d'éssai pour Teil 2: Messverfahren für nichtelektrische
caractéristiques non électriques Eigenschaften
(CEI 62025-2:2005) (IEC 62025-2:2005)

This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62025-2:2005 E
Foreword
The text of document 51/797/FDIS, future edition 1 of IEC 62025-2, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62025-2 on 2005-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62025-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62025-2:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration
+ corr. March 1995 (sinusoidal) EN 60068-2-6 1995

2)
IEC 60068-2-20 1979 Part 2: Tests - Test T: Soldering HD 323.2.20 S3 1988

IEC 60068-2-21 1999 Part 2-21: Tests - Test U: Robustness of EN 60068-2-21 1999
terminations and integral mounting
devices
IEC 60068-2-27 1987 Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock
IEC 60068-2-45 1980 Part 2: Tests - Test Xa and guidance: EN 60068-2-45 1992
Immersion in cleaning solvents

IEC 60068-2-58 2004 Part 2-58: Tests - Test Td: Test methods EN 60068-2-58 2004
for solderability, resistance to dissolution + corr. December 2004
of metallization and to soldering heat of
surface mounting devices (SMD)

3) 4)
IEC 60068-2-69 - Part 2: Tests - Test Te: Solderability EN 60068-2-69 1996
testing of electronic components for
surface mount technology by the wetting
balance method
IEC 60068-2-77 1999 Part 2-77: Tests - Test 77: Body strength EN 60068-2-77 1999
and impact shock
IEC 61188-5-2 2003 Printed boards and printed board EN 61188-5-2 2003
assemblies - Design and use
Part 5-2: Attachment (land/joint)
considerations - Discrete components

1)
EN 60068-1 includes corrigendum October 1988 + A1:1992 to IEC 60068-1.
2)
HD 323.2.20 S3 includes A2:1987 to IEC 60068-2-20.
3)
Undated reference.
4)
Valid edition at date of issue.

Publication Year Title EN/HD Year
IEC 61190-1-2 2002 Attachment materials for electronic EN 61190-1-2 2002
assembly
Part 1-2: Requirements for solder pastes
for high-quality interconnections in
electronics assembly
IEC 61190-1-3 2002 Attachment materials for electronic EN 61190-1-3 2002
assembly
Part 1-3: Requirements for electronic
grade solder alloys and fluxed and non-
fluxed solid solders for electronic
soldering applications
IEC 62211 2003 Inductive components - Reliability EN 62211 2004
management
NORME CEI
INTERNATIONALE IEC
62025-2
INTERNATIONAL
Première édition
STANDARD
First edition
2005-01
Composants inductifs à haute fréquence –
Caractéristiques non électriques
et méthodes de mesure –
Partie 2:
Méthodes d'essai pour caractéristiques
non électriques
High frequency inductive components –
Non-electrical characteristics and
measuring methods –
Part 2:
Test methods for non-electrical characteristics
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale PRICE CODE T
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62025-2  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope .9
2 Normative references .9
3 Terms and definitions .11
4 Test conditions .11
4.1 Standard atmospheric conditions for test.11
4.2 Referee conditions.11
5 Mechanical characteristics test .13
5.1 Body strength test .13
5.2 Robustness of termination (electrode) .15
5.3 Solderability.27
5.4 Resistance to soldering heat.33
5.5 Resistance to dissolution of metallization .37
5.6 Vibration.39
5.7 Resistance to shock.41

Annex A (normative) Mounting of surface mounting inductor to test printed-circuit board .45

Figure 1 – Method for pressurizing body.13
Figure 2 – Pressurizing jig .15
Figure 3 – Example of printed-circuit board .17
Figure 4 – Layout.21
Figure 5 – Pressurizing jig .21
Figure 6 – Pressurizing .21
Figure 7 – Pressurizing and shape of jig.25
Figure 8 – Reflow temperature profile.31

Table 1 – Size of soldering lands by the code of multi-layer chip inductors.17
Table 2 – Thickness of solder paste by the size code of inductors.19
Table 3 – Conditions of immersion into solder .29
Table 4 – Reflow temperature .29
Table 5 – Severity.33
Table 6 – Reflow temperature .35
Table 7 – Conditions of vibration .41

62025-2  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH FREQUENCY INDUCTIVE COMPONENTS –
NON-ELECTRICAL CHARACTERISTICS AND
MEASURING METHODS –
Part 2: Test methods for non-electrical characteristics

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the
...