EN 62343-3-1:2016
(Main)Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
IEC 62343-3-1:2010 provides a performance specification template for the dynamic channel equalizer (DCE). The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of dynamic channel equalizers. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this standard should not be removed from the detail product specifications or performance specifications.
Dynamische Module - Teil 3-1: Vorlagen für Leistungsspezifikationen - Dynamische Kanal-Equalizer
Modules dynamiques - Partie 3-1: Modèles de spécification de performance - Egaliseurs de canaux de transmission dynamiques
IEC 62343-3-1:2016 fournit un modèle de spécification de performance pour les égaliseurs de canaux de transmission dynamiques. Ce modèle de spécification de performance est destiné à donner un cadre pour l’établissement des spécifications particulières concernant le produit ou les performances des égaliseurs de canaux de transmission dynamiques. Des paramètres de spécification supplémentaires peuvent être inclus pour les spécifications de produit ou les spécifications de performance. Toutefois, il convient de ne pas retirer les paramètres de spécification stipulés dans la présente norme des spécifications de produit ou des spécifications de performance. Les informations techniques concernant les égaliseurs de canaux de transmission dynamiques et leurs applications dans des systèmes DWDM sont décrites dans l'IEC TR 62343-6-1. Cette deuxième édition annule et remplace la première édition parue en 2010 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: modifications des termes et définitions et des références. Mots clés: égaliseur de canaux de transmission dynamique (DCE)
Dinamični moduli - 3-1. del: Predloge za tehnične specifikacije - Dinamični kanalski stabilizatorji (IEC 62343-3-1:2016)
Standard IEC 62343-3-1:2010 zagotavlja predlogo za tehnično specifikacijo za dinamične kanalske stabilizatorje (DCE). Cilj te predloge za tehnično specifikacijo je zagotoviti okvir za pripravo podrobnih specifikacij za delovanje dinamičnih kanalskih stabilizatorjev. Vključeni so lahko dodatni tehnični parametri za podrobne specifikacije proizvodov ali tehnične specifikacije. Tehničnih parametrov iz tega standarda se ne sme odstraniti iz podrobnih specifikacij proizvodov ali tehničnih specifikacij.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2016
1DGRPHãþD
SIST EN 62343-3-1:2010
'LQDPLþQLPRGXOLGHO3UHGORJH]DWHKQLþQHVSHFLILNDFLMH'LQDPLþQLNDQDOVNL
VWDELOL]DWRUML,(&
Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel
equalizers (IEC 62343-3-1:2016)
Ta slovenski standard je istoveten z: EN 62343-3-1:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62343-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2016
ICS 33.180.20 Supersedes EN 62343-3-1:2010
English Version
Dynamic modules - Part 3-1: Performance specification
templates - Dynamic channel equalizers
(IEC 62343-3-1:2016)
Modules dynamiques - Partie 3-1: Modèles de spécification Dynamische Module - Teil 3-1: Vorlagen für
de performance - Egaliseurs de canaux de transmission Leistungsspezifikationen - Dynamische Kanal-Equalizer
dynamiques (IEC 62343-3-1:2016)
(IEC 62343-3-1:2016)
This European Standard was approved by CENELEC on 2016-05-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62343-3-1:2016 E
European foreword
The text of document 86C/1370/FDIS, future edition 2 of IEC 62343-3-1, prepared by
SC 86C “Fibre optic systems and active devices” of IEC/TC 86 “Fibre optics” was submitted
to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62343-3-1:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-02-26
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-05-26
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62343-3-1:2010.
It constitutes a technical revision and includes the following significant technical change with respect
to the previous edition:
– modification of terms and definitions and references.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62343-3-1:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 61300 (series) NOTE Harmonized in EN 61300 (series).
IEC 61753-1 NOTE Harmonized as EN 61753-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -- Part 2-14:
Tests - High optical power
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -- Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures -- Part 3-29:
Examinations and measurements -
Spectral transfer characteristics of DWDM
devices
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -- Part 3-32:
Examinations and measurements -
Polarization mode dispersion
measurement for passive optical
components
IEC 61300-3-38 - Fibre optic interconnecting devices and EN 61300-3-38 -
passive components - Basic test and
measurement procedures - Part 3-
38:Examinations and measurements -
Group delay, chromatic dispersion and
phase ripple
IEC 61753-021-2 - Fibre optic interconnecting devices and EN 61753-021-2 -
passive components performance standard
-- Part 021-2: Grade C/3 single-mode fibre
optic connectors for category C -
Controlled environment
IEC 62343 - Dynamic modules - General and guidance EN 62343 -
ITU-T - Spectral grids for WDM applications: - -
Recommendation DWDM frequency grid
G.694.1
IEC 62343-3-1 ®
Edition 2.0 2016-04
INTERNATIONAL
STANDARD
Dynamic modules –
Part 3-1: Performance specification templates – Dynamic channel equalizers
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-3321-4
– 2 – IEC 62343-3-1:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 7
4 Test report. 7
5 Reference components . 7
6 Performance requirements . 7
6.1 Dimensions . 7
6.2 Sample size . 7
6.3 Test details and requirements . 7
Bibliography . 10
Table 1 – Tests and requirements . 8
IEC 62343-3-1:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 3-1: Performance specification templates –
Dynamic channel equalizers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.