prEN IEC 82474-1:2023
(Main)Material declaration - Part 1: General requirements
Material declaration - Part 1: General requirements
Déclaration de matières - Partie 1: Exigences générales
Deklaracija materialov - 1. del: Splošne zahteve
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 82474-1:2023
01-september-2023
Deklaracija materialov - 1. del: Splošne zahteve
Material declaration – Part 1: General requirements
Ta slovenski standard je istoveten z: prEN IEC 82474-1:2023
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
oSIST prEN IEC 82474-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 82474-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 82474-1:2023
111/706/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 82474-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-14 2023-10-06
SUPERSEDES DOCUMENTS:
111/670/CD, 111/704/CC
IEC TC 111 : ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
SECRETARIAT: SECRETARY:
Italy Mr Alfonso Sturchio
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 2,TC 9,TC 18,TC 20,TC 21,TC 23,TC 34,SC
34D,TC 59,TC 62,SC 65B,TC 80,TC 82,TC 88,TC
Other TC/SCs are requested to indicate their interest, if any,
100,TC 110,TC 121,TC 124,TC 125,ACEA
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Material declaration – Part 1: General requirements
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 82474-1:2023
1 CONTENTS
2
3 FOREWORD . 5
4 INTRODUCTION . 7
5 1 Scope . 9
6 2 Normative references . 9
7 3 Terms, definitions and abbreviations . 9
8 4 Requirements for material declarations . 18
9 4.1 General . 18
10 4.1.1 Overview . 18
11 4.1.2 Conformity to the ISO/IEC 82474-1 standard . 22
12 4.1.3 General requirements . 22
13 4.1.4 Sector-specific requirements . 22
14 4.2 Business information . 22
15 4.3 Product information . 23
16 4.4 Declaration for compliance requirements . 24
17 4.4.1 General information . 24
18 4.4.2 DSs and DSGs with mandatory reporting requirements . 24
19 4.4.3 DSs and DSGs with optional reporting requirements . 25
20 4.4.4 Product part Information . 25
21 4.5 Composition declaration requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.