EN 60191-4:1999/A2:2002
(Amendment)Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages
Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages
EN following parallel vote
Mechanische Normung von Halbleiterbauelementen - Teil 4: Codierungssystem für Gehäuse und Eingruppierung der Gehäuse nach der Gehäuseform für Halbleiterbauelemente
Normalisation mécanique des dispositifs à semiconducteurs - Partie 4: Système de codification et classification en formes des boîtiers pour dispositifs à semiconducteurs
Standardizacija mehanskih lastnosti polprevodniških elementov – 6-4. del: Kodirni sistem in klasifikacija oblik okrovov polprevodniških elementov - Dopolnilo A2 (IEC 60191- 4:1999/A2:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60191-4:2002/A2:2005
STANDARD
marec 2005
Standardizacija mehanskih lastnosti polprevodniških elementov – 6-4. del:
Kodirni sistem in klasifikacija oblik okrovov polprevodniških elementov -
Dopolnilo A2 (IEC 60191- 4:1999/A2:2002)
Mechanical standardization of semiconductor devices - Part 4: Coding system and
classification into forms of package outlines for semiconductor device packages -
Amendment A2 (IEC 60191- 4:1999/A2:2002)
ICS 31.080.01; 31.240 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60191-4/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2002
ICS 31.080
English version
Mechanical standardization of semiconductor devices
Part 4: Coding system and classification into forms of package outlines
for semiconductor device packages
(IEC 60191-4:1999/A2:2002)
Normalisation mécanique des dispositifs Mechanische Normung
à semiconducteurs von Halbleiterbauelementen
Partie 4: Système de codification Teil 4: Codierungssystem für Gehäuse
et classification en formes des boîtiers und Eingruppierung der Gehäuse
pour dispositifs à semiconducteurs nach der Gehäuseform
(CEI 60191-4:1999/A2:2002) für Halbleiterbauelemente
(IEC 60191-4:1999/A2:2002)
This amendment A2 modifies the European Standard EN 60191-4:1999; it was approved by CENELEC
on 2002-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60191-4:1999/A2:2002 E
Foreword
The text of document 47D/505/FDIS, future amendment 2 to IEC 60191-4:1999, prepared by SC 47D,
Mechanical standardization of semiconductor devices, of IEC TC 47, Semiconductor devices, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to
EN 60191-4:1999 on 2002-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2005-10-01
Annexes designated "informative" are given for information only.
In this standard, annex B is informative.
__________
Endorsement notice
The text of amendment 2:2002 to the International Standard IEC 60191-4:1999 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
60191-4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.