SIST EN 16836-3:2017

Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer

This European Standard specifies the application layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network. This European Standard makes reference to a number of documents whereby core requirements are specified. This referencing is in compliance with the Bridge Consortium and additionally the Memorandum of Understanding between the ZigBee Alliance and CEN/CENELEC.
The EN 16836 series represents a feature subset of a larger standard and as such not all of the features specified in the referenced documents are specified in this standard, due to some features being outside the scope of CEN/TC 294. Where this is the case the out of scope feature has either been omitted or specified as excluded.

Kommunikationssysteme für Zähler - Drahtloses Mesh-Netzwerk für den Zählerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen Anwendungsschicht

Diese Europäische Norm legt die Anwendungsschicht eines Kommunikationsprotokolls für den Datenaustausch zwischen Zählern und anderen Geräten in einem Mesh Netzwerk fest. Diese Europäische Norm verweist auf eine Reihe von Dokumenten, in denen Kernanforderungen festgelegt sind. Diese Verweisung steht in Übereinstimmung mit dem Bridge Consortium sowie der Absichtserklärung zwischen der ZigBee Alliance und CEN/CENELEC.
Die Normenreihe EN 16836 stellt eine Teilmenge von Merkmalen eines umfassenderen Standards dar; da einige Merkmale außerhalb des Anwendungsbereichs von CEN/TC 294 liegen, sind daher nicht alle in den entsprechenden Dokumenten festgelegten Merkmale auch in dieser Norm festgelegt. Wo dies der Fall ist, wurde das entsprechende Merkmal entweder weggelassen oder als ausgeschlossen gekennzeichnet.

Systèmes de communication des compteurs - Réseau maillé sans fil pour l’échange de données de compteurs - Partie 3 : Spécifications de la couche application spéciale <profil énergie>

La présente Norme européenne spécifie la couche d’application d'un protocole de communication pour l'échange de données entre des dispositifs de comptage et d'autres dispositifs dans un réseau maillé. La présente norme fait référence à un certain nombre de documents dans lesquels sont spécifiées les exigences essentielles. La référence à ces documents est conforme à la procédure « lien avec les consortiums » (Consortium Bridge) ainsi qu'au protocole d'accord (MoU) entre l'Alliance ZigBee et le CEN/CENELEC.
La série EN XXXX représente un sous-ensemble de caractéristiques d'une norme plus étendue. De ce fait, les caractéristiques spécifiées dans les documents de référence ne sont pas toutes mentionnées dans la présente norme car certaines d'entre elles ne relèvent pas du domaine d'application du CEN/TC 294. Si c'est le cas, la caractéristique ne relevant pas du domaine d'application est soit omise, soit mentionnée comme exclue.

Komunikacijski sistemi za merilnike - Brezžična zankasta omrežja za izmenjavo podatkov merilnikov - 3. del: Specifikacija energijskega profila namenske aplikacijske plasti

Ta evropski standard določa aplikacijsko plast komunikacijskega protokola za izmenjavo podatkov od merilnih do drugih naprav znotraj zankastega omrežja. Ta evropski standard se sklicuje na številne dokumente, v katerih so določene glavne zahteve. To sklicevanje je skladno z združenjem Bridge Consortium in z Memorandumom o razumevanju med združenjem ZigBee Alliance in CEN/CENELEC.
Skupina standardov EN 16836 je podskupina večjega standarda, tako da vse funkcije, ki so opredeljene v sklicevanih dokumentih, niso opredeljene v tem standardu, saj nekatere ne spadajo na področje uporabe standarda CEN/TC 294. V teh primerih je funkcija, ki ne spada na področje uporabe standarda, izpuščena ali označena kot izključena.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 29-Apr-2015
• Publication Date: 29-Nov-2016
• Withdrawal Date: 22-May-2024
• ICS: 33.200 - Telecontrol. Telemetering
• ICS: 35.100.70 - Application layer
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-May-2024
• Due Date: 15-Jun-2024
• Completion Date: 23-May-2024
• Mandate: M/441 - Standardisation mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility meters involving communication protocols enabling interoperability
• Mandate: M/462 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of ICT to enable efficient energy use in fixed and mobile information and communication networks
• Ref Project: EN 16836-3:2016 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QDPHQVNHKommunikationssysteme für Zähler - Drahtloses Mesh-Netzwerk für den Zählerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen AnwendungsschichtSystèmes de communication des compteurs - Réseau maillé sans fil pour l’échange de données de compteurs - Partie 3 : Spécifications de la couche application spéciale Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer35.100.70Uporabniški slojApplication layer33.200Daljinsko krmiljenje, daljinske meritve (telemetrija)Telecontrol. TelemeteringICS:Ta slovenski standard je istoveten z:EN 16836-3:2016SIST EN 16836-3:2017en,fr,de01-januar-2017SIST EN 16836-3:2017SLOVENSKI
STANDARD



SIST EN 16836-3:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16836-3
November
t r s x ICS
u uä t r râ
u wä s r rä y r English Version
Communication systems for meters æ Wireless mesh networking for meter data exchange æ Part
uã Energy profile specification dedicated application layer Systèmes de communication des compteurs æ Réseau maillé sans fil pour l 5échange de données de compteurs æ Partie
u ã Spécifications de la couche application spéciale
´profil énergie µ
Kommunikationssysteme für Zähler æ Drahtloses MeshæNetzwerk für den Zählerdatenaustausch æ Teil
uã EnergieæProfilspezifikation der speziellen Anwendungsschicht This European Standard was approved by CEN on
u September
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z u xæ uã t r s x ESIST EN 16836-3:2017



EN 16836-3:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Requirements . 5 4.1 General . 5 4.2 Cluster library . 6 Table 1 — Reference to ZigBee Cluster Library – 07–5123 Rev 04 . 6 4.3 Smart energy profile . 7 Table 2 — ZigBee Smart Energy Profile Specification 07–5356 Rev 19 Reference . 7 4.4 Over the air upgrade . 16
SIST EN 16836-3:2017



EN 16836-3:2016 (E) 3 European foreword This document (EN 16836-3:2016) has been prepared by Technical Committee CEN/TC 294 “Communication systems for meters”, the secretariat of which is held by DIN. This European Standard
...

SLOVENSKI STANDARD
oSIST prEN 16836-3:2015
01-april-2015
.RPXQLNDFLMVNLVLVWHPL]DPHULOQLNH%UH]åLþQD]DQNDVWDRPUHåMD]DL]PHQMDYR
SRGDWNRYPHULOQLNRYGHO6SHFLILNDFLMDHQHUJLMVNHJDSURILODQDPHQVNH
DSOLNDFLMVNHSODVWL
Communication systems for meters - Wireless mesh networking for meter data exchange
- Part 3: Energy profile specification dedicated application layer
Kommunikationssysteme für Zähler - Drahtloses Mesh-Netzwerk für den
Zählerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen
Anwendungsschicht
Systèmes de communication des compteurs - Réseau maillé sans fil pour l’échange de
données de compteurs - Partie 3 : Spécifications de la couche application spéciale

Ta slovenski standard je istoveten z: prEN 16836-3
ICS:
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
35.100.70 Uporabniški sloj Application layer
oSIST prEN 16836-3:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16836-3:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16836-3:2015

EUROPEAN STANDARD
DRAFT
prEN 16836-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2015
ICS 33.200; 35.100.70
English Version
Communication systems for meters - Wireless mesh networking
for meter data exchange - Part 3: Energy profile specification
dedicated application layer
Systèmes de communication des compteurs - Réseau Kommunikationssysteme für Zähler - Drahtloses Mesh-
maillé sans fil pour l'échange de données de compteurs - Netzwerk für den Zählerdatenaustausch - Teil 3: Energie-
Partie 3 : Spécifications de la couche application spéciale Profilspezifikation der speziellen Anwendungsschicht

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 294.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16836-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16836-3:2015
prEN 16836-3:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Requirements .5
4.1 General .5
4.2 Cluster library .
...