SIST EN 1829-2:2008/AC:2011

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

This European Standard applies to hoses, hose lines and connectors intended to be used with high-pressure water jet machines within the scope of EN 1829-1.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the equipment in the scope, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see clause 4).
This European Standard deals with safety requirements to minimise the significant hazards which can arise from assembling, operating and servicing of hoses, hose lines and connectors for use with high pressure water jet machines (see clause 5).
NOTE This European Standard does not cover leak shields since they are not part of a hose line.
The hazard due to scalding from hot liquid or from irritation / burning of any added chemicals is not covered in this European Standard.
This European Standard is not applicable to hoses, hose lines and their accessories, which are manufactured before the date of its publication as EN.
NOTE For products of similar application that are outside of the scope of this European Standard and for which there is no alternative document available the relevant Clauses of this European Standard may be used.

Hochdruckwasserstrahlmaschinen - Sicherheitstechnische Anforderungen - Teil 2: Schläuche, Schlauchleitungen und Verbindungselemente

Machines à jet d'eau à haute pression - Prescriptions de sécurité - Partie 2: Tuyaux flexibles, lignes de tuyauteries flexibles et éléments de raccordement

Visokotlačni stroji z vodnim curkom - Varnostne zahteve - 2. del: Cevi, cevne napeljave in cevni priključki

Ta evropski standard velja za cevi, cevne napeljave in cevne priključke za uporabo z visokotlačnimi stroji z vodnimi curkom v področju uporabe EN 1829-1.
Ta evropski standard obravnava vse velike nevarnosti, nevarne situacije in primere v zvezi z opremo, ki jih obravnava, kadar se uporabljajo, kot predvideno, in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej klavzulo 4).
Ta evropski standard obravnava varnostne zahteve za zmanjšanje velikih nevarnosti, ki lahko nastanejo zaradi sestave, delovanja in servisiranja cevi, cevne napeljave in cevnih priključkov za uporabo pri visokotlačnih strojih z vodnim curkom (glej klavzulo 5).
OPOMBA: Ta evropski standard ne zajema zaščit proti puščanju, ker niso del cevne napeljave.
Nevarnost opeklin zaradi vroče tekočine ali zaradi draženja/gorenja katerih koli dodatnih kemikalij ni zajeta v tem evropskem standardu.
Ta evropski standard se ne uporablja za cevi, cevne napeljave in njihove dodatke, ki so bili proizvedeni pred datumom, ko je bil objavljen kot EN.
OPOMBA: Za proizvode podobne uporabe, ki so zunaj področja uporabe tega evropskega standarda in za katere ni na voljo nobenega drugega dokumenta, se lahko uporabijo ustrezne klavzule tega evropskega standarda.

General Information

• Status: Published
• Publication Date: 11-Apr-2011
• ICS: 97.080 - Cleaning appliances
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Apr-2011
• Due Date: 11-Jun-2011
• Completion Date: 12-Apr-2011
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 1829-2:2008/AC:2011 - High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

Relations

• Corrects: SIST EN 1829-2:2008 - High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
• Effective Date: 18-Dec-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochdruckwasserstrahlmaschinen - Sicherheitstechnische Anforderungen - Teil 2: Schläuche, Schlauchleitungen und VerbindungselementeMachines à jet d'eau à haute pression - Prescriptions de sécurité - Partie 2: Tuyaux flexibles, lignes de tuyauteries flexibles et éléments de raccordementHigh-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors97.080Aparati za nego talFloor treatment appliancesICS:Ta slovenski standard je istoveten z:EN 1829-2:2008/AC:2011SIST EN 1829-2:2008/AC:2011en,fr,de01-maj-2011SIST EN 1829-2:2008/AC:2011SLOVENSKI
STANDARD



SIST EN 1829-2:2008/AC:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1829-2:2008/AC
February 2011
Février 2011
Februar 2011 ICS 97.080 English version Version Française Deutsche Fassung
High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
Machines à jet d'eau à haute pression - Prescriptions de sécurité - Partie 2: Tuyaux flexibles, lignes de tuyauteries flexibles et éléments de raccordement
Hochdruckwasserstrahlmaschinen - Sicherheitstechnische Anforderungen - Teil 2: Schläuche, Schlauchleitungen und Verbindungselemente This corrigendum becomes effecti
...