Hexagon nuts, style 2 - Product grades A and B (ISO 4033:2012)

This International Standard specifies the characteristics of hexagon high nuts (style 2), with threads from M5 up to and including M36, with product grade A for threads D ≤ M16 and product grade B for threads D > M16. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724, ISO 898-2, ISO 965-1 and ISO 4759-1.

Sechskantmuttern, Typ 2 - Produktklassen A und B (ISO 4033:2012)

Diese Internationale Norm legt Eigenschaften von hohen Sechskantmuttern (Typ 2) mit Gewinden von M5 bis M36, in Produktklasse A für Gewinde D  M16 und Produktklasse B für Gewinde D  M16, fest.
Falls in besonderen Fällen andere Festlegungen als die in dieser Internationalen Norm aufgeführten benötigt werden, können diese den entsprechenden Internationalen Normen entnommen werden, z. B. ISO 724, ISO 898 2, ISO 965 1 und ISO 4759 1.
ANMERKUNG   Für Sechskantmuttern mit normaler Höhe (Typ 1), siehe ISO 4032.

Écrous hexagonaux, style 2 - Grades A et B (ISO 4033:2012)

L'ISO 4033:2012 spécifie les caractéristiques des écrous hexagonaux hauts (style 2), de diamètres de filetage M5 à M36 inclus, de grade A pour les filetages de diamètre inférieur ou égal à M16 et de grade B pour les filetages de diamètre supérieur à M16.

Šestrobe matice, tip 2 - Razreda izdelave A in B (ISO 4033:2012)

Ta mednarodni standard določa značilnosti šestrobih matic (tip 2) z navoji od M5 do vključno M36, z razredom izdelave A za navoje D ≤ M16 in razredom izdelave B za navoje D > M16. Če so v posebnih primerih zahtevane specifikacije, ki niso navedene v tem mednarodnem standardu, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 724, ISO 898-2, ISO 965-1 in ISO 4759-1.

General Information

Status
Withdrawn
Publication Date
26-May-2014
Withdrawal Date
18-Sep-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-Sep-2023
Due Date
11-Oct-2023
Completion Date
19-Sep-2023

Relations

Buy Standard

Standard
EN ISO 4033:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4033:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 4033:2002
Šestrobe matice, tip 2 - Razreda izdelave A in B (ISO 4033:2012)
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:2012)
Sechskantmuttern, Typ 2 - Produktklassen A und B (ISO 4033:2012)
Écrous hexagonaux, style 2 - Grades A et B (ISO 4033:2012)
Ta slovenski standard je istoveten z: EN ISO 4033:2012
ICS:
21.060.20 Matice Nuts
SIST EN ISO 4033:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4033:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 4033:2014


EUROPEAN STANDARD
EN ISO 4033

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 4033:2000
English Version
Hexagon high nuts (style 2) - Product grades A and B (ISO
4033:2012)
Écrous hexagonaux hauts (style 2) - Grades A et B (ISO Sechskantmuttern, Typ 2 - Produktklassen A und B (ISO
4033:2012) 4033:2012)
This European Standard was approved by CEN on 13 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4033:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4033:2014
EN ISO 4033:2012 (E)
Contents Page
Foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4033:2014
EN ISO 4033:2012 (E)
Foreword
This document (EN ISO 4033:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4033:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4033:2012 has been approved by CEN as a EN ISO 4033:2012 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 4033:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 4033:2014
INTERNATIONAL ISO
STANDARD 4033
Third edition
2012-12-15
Hexagon high nuts (style 2) — Product
grades A and B
Écrous hexagonaux hauts (style 2) — Grades A et B
Reference number
ISO 4033:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 4033:2014
ISO 4033:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.