SIST EN ISO 11111-1:2017
(Main)Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
ISO 11111-1:2016 specifies safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111‑2 to ISO 11111‑7. The standard series is complemented by the type C standards ISO 9902 (all parts) with respect to noise emission measurement and ISO 23771 with respect to measures for the reduction of noise emissions.
ISO 11111-1:2016 is applicable to machinery plant and related equipment intended to be used in the textile industry for the following purposes:
- opening, cleaning, blending, carding, preparation subsequent to carding, spinning and other processing of fibres (staple and filament) and other materials to form yarn or nonwoven material (including felts);
- winding, doubling, twisting, texturing, etc., of yarns and the processing of yarns preparatory to weaving and knitting;
- weaving, knitting, lace-making and similar utilization of yarn, etc., to form fabric;
- forming of braid, cord, strand, rope, twine, net, etc., except take-up reels of stranding and laying machinery;
- processing, including the pretreatment, bleaching, dyeing, printing and finishing of fibre, yarn, fabric, braid, cord, etc., and final assembly for dispatch;
- piece-dyeing of made-up goods;
- finishing of warp and weft knitting, including hosiery, other than assembly of the finished product (e.g. sewing);
- manufacturing of carpets by weaving, tufting and other processes.
ISO 11111-1:2016 applies to all machinery, plant and equipment used during the processes listed above, including equipment to enable automated operation of the machines and processes in either free-standing or complex installations, such as pneumatic fibre transportation, but excluding other transportation between the interfaces of the machines.
NOTE 1 The standard for a specific textile machine will normally consist of two parts: this part of ISO 11111 and the specific part of ISO 11111 relevant to that machine. However, in the case of nonwoven lines, which are covered by ISO 11111‑3, ISO 11111‑2, ISO 11111‑6 and ISO 11111‑7 are also to be taken into account.
ISO 11111-1:2016 does not deal with specific requirements for pressure containment.
NOTE 2 In the EU and EFTA, specific directives for pressure vessels and electromagnetic compatibility, among others, exist.
ISO 11111 (all parts) addresses hazards arising from the transport, assembly and commissioning of the machinery, its adjustment, use, maintenance, decommissioning, dismantling and disposal. Manual loading/unloading is considered to be part of the normal operation of the machinery.
ISO 11111-1:2016 and the other parts of ISO 11111 are not applicable to machinery, plant and related equipment used for
- manufacturing continuous filaments and man-made fibres up to and including the formation of the first textile package (e.g. continuous filament cheese, staple fibre bale),
- hackling and carding of flax and similar,
- manufacturing of spun-bonded and melt-blown nonwovens,
- forming and making up of garments, household and industrial textile goods, and the pressing and die cutting of nonwoven fabric,
- laundering and dry cleaning of made-up textile goods,
- servicing of textile machines (e.g. machines for card wire mounting, cleaning machines for components of printing machines), and
- certain cutting devices, e.g. log-slitting device, laser cutting, high pressure water jets, ultrasonic device.
NOTE 3 The machines and equipmen
Textilmaschinen - Sicherheitsanforderungen - Teil 1: Gemeinsame Anforderungen (ISO 11111-1:2016)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 1: Exigences communes (ISO 11111-1:2016)
ISO 11111-1:2016 spécifie les exigences de sécurité contre des phénomènes dangereux fréquents communs aux types de machines textiles et contre des phénomènes dangereux de certains éléments de machine couverts par les normes ISO 11111‑2 à ISO 11111‑7. La série de normes est complétée par les normes de type C ISO 9902 (toutes les parties) en ce qui concerne les mesures de bruit et l'ISO 23771 en ce qui concerne les mesures de réduction de l'émission sonore.
ISO 11111-1:2016 est applicable aux installations de machines ainsi qu'au matériel associé destinés à être utilisés dans l'industrie textile à des fins suivantes:
- l'ouverture, le nettoyage, le mélange, le cardage, la préparation après cardage, la filature et autres traitements des fibres (brins et fils) et autres matériaux servant à fabriquer des fils ou des nontissés (y compris les feutres);
- le bobinage, le doublage, le retordage, la texturation, etc. des fils et le traitement préliminaire des fils avant le tissage ou le tricotage;
- le tissage, le tricotage, la fabrication de dentelle et autres utilisations similaires des fils, etc. pour fabriquer de l'étoffe;
- la fabrication de galon, corde, brin, cordage, ficelle, filet, etc., à l'exception de la reprise des bobines des machines de toronnage et de câblage;
- les traitements incluant le prétraitement, le blanchiment, la teinture, l'impression et le finissage des fibres, des fils, des tissus, des galons, des cordes, etc., et l'assemblage final avant expédition;
- la teinture en pièce des articles de confection;
- le finissage de tricot à mailles jetées et à mailles cueillies, y compris la bonneterie, autre que l'assemblage du produit fini, par exemple la couture;
- la fabrication de tapis, par tissage, touffetage et autres procédés.
ISO 11111-1:2016 s'applique à l'ensemble des machines, installations et équipements qui sont utilisés pendant les processus énumérés ci-dessus, y compris aux équipements permettant le fonctionnement automatisé des machines et des processus dans des installations autonomes ou complexes, comme le transport pneumatique de fibres à l'exclusion du transport entre les interfaces des machines.
NOTE 1 La norme pour une machine textile spécifique sera constituée logiquement de deux parties: la présente partie de l'ISO 11111 et la partie spécifique de l'ISO 11111 relative à cette machine. Cependant, dans le cas des lignes de nontissé, couverts par l'ISO 11111‑3, l'ISO 11111‑2, l'ISO 11111‑6 et l'ISO 11111‑7 sont également à prendre en compte.
ISO 11111-1:2016 ne donne pas d'exigences particulières relatives à la maîtrise de la pression.
NOTE 2 En Europe et dans les pays de l'Association européenne de libre-échange, il existe, parmi d'autres, des directives spécifiques pour les récipients sous pression et la compatibilité électromagnétique.
L'ISO 11111 (toutes les parties) concerne les phénomènes dangereux résultant du transport, de l'assemblage et de la mise en service du matériel, de son ajustement, utilisation, maintenance, arrêt, démontage et destruction. Le chargement/déchargement manuel est considéré comme faisant partie du fonctionnement normal du matériel.
ISO 11111-1:2016 et les autres parties de l'ISO 11111 ne s'appliquent pas aux machines, installations et matériel associé utilisés pour
- la fabrication de fils continus et de fibres synthétiques, y compris le premier mode d'enroulement textile formé (par exemple, bobine de fil continu, balle de fibre synthétique, en bourre ou en ruban
Tekstilni stroji - Varnostne zahteve - 1. del: Splošne zahteve (ISO 11111-1:2016)
Standard ISO 11111-1:2016 določa varnostne zahteve za pogoste nevarnosti, ki so skupne vrstam tekstilnih strojev, zajetih v standardih ISO 11111-2 do ISO 11111-7, ter nevarnosti določenih elementov strojev, ki so zajeti v omenjenih standardih. Skupino standardov dopolnjujejo standardi ISO 9902 tipa C (vsi deli) v povezavi z merjenjem emisij hrupa in ISO 23771 v povezavi z ukrepi za zmanjšanje emisij hrupa.
Standard ISO 11111-1:2016 se uporablja za strojne obrate in povezano opremo, ki je namenjena uporabi v tekstilni industriji za:
– odpenjanje, čiščenje, mešanje, mikanje, pripravo po mikanju, predenje ter druge načine obdelave vlaken (prediva ali filamentov) ter drugih materialov za tvorjenje preje ali drugega netkanega materiala (vključno s filcem);
– navijanje, mešanje, sukanje, teksturiranje itd. preje in obdelavo preje pred tkanjem in pletenjem;
– tkanje, pletenje, klekljanje ali podobne načine uporabe preje itd. za izdelavo blaga;
– izdelavo kite, vrvice, pramena, vrvi, sukanca, mreže itd., razen prevzemnega položaja koluta strojev za sukanje in poravnavo blaga;
– obdelavo, vključno s predobdelavo, beljenje, barvanje, tiskanje in končno obdelavo vlaken, preje, blaga, kite, vrvice itd. ter končno pakiranje pred odpošiljanjem;
– barvanje končnih izdelkov;
– pletenje osnovnih in votkovnih niti, vključno z nogavicami, razen oblikovanja končnega izdelka (npr. šivanje);
– izdelavo tapet s pletenjem, všivanjem ali drugimi postopki.
Standard ISO 11111-1:2016 se uporablja za vse stroje, obrate in opremo, ki se uporabljajo med zgoraj navedenimi postopki, vključno z opremo za omogočanje samodejnega delovanja strojev in postopkov v samostojnih ali kompleksnih inštalacijah, kot so stroji za pnevmatski prenos vlaken, pri čemer so stroji za druge vrste prenosa vlaken med vmesniki strojev izključeni.
OPOMBA 1: standard za določen tekstilni stroj je navadno sestavljen iz dveh delov: tega dela standarda ISO 11111 in drugega njegovega dela, ki ustreza posameznemu stroju. Vendar v primeru netkanih materialov, ki so zajeti v standardu ISO 11111-3, je treba upoštevati tudi standarde ISO 11111-2, ISO 11111-6 in ISO 11111-7.
Standard ISO 11111-1:2016 ne zajema posebnih zahtev za tlačno skladiščenje.
OPOMBA 2: v območjih EU in EFTA obstajajo med drugim posebne direktive za tlačne posode in elektromagnetno združljivost.
ISO 11111 (vsi deli) obravnava nevarnosti, ki izhajajo iz transporta, sestavljanja, usposabljanja za zagon, prilagajanja, uporabe, vzdrževanja, izločitvi iz uporabe, razstavljanja in odstranjevanja stroja. Ročno nalaganje/praznjenje je del običajnega delovanja stroja.
Standard ISO 11111-1:2016 in drugi deli standarda ISO 11111 se ne uporabljajo za stroje, obrate in z njimi povezano opremo, ki se uporablja za:
– izdelavo brezkončnih filamentov in umetnih vlaken do vključno oblikovanja prvega tekstilnega paketa (npr. koluta brezkončnih filamentov, bale prediva),
– rezanje in mikanje lanu ali podobnih materialov,
– izdelavo netkanih materialov z združevanjem in pihanjem,
– oblikovanje in izdelavo oblek, gospodinjskih in industrijskih tekstilnih izdelkov ter stiskanje in rezanje netkanega blaga z modelom,
– pranje in suho čiščenje končnih izdelkov iz tekstila,
– servisiranje tekstilnih strojev (npr. stroji za nameščanje žice za mikanje, stroji za čiščenje komponent tiskalnih strojev) in – določene naprave za rezanje (npr. cepivci, naprave za rezanje z laserjem, naprave z visokotlačnimi vodnimi curki, ultrazvočne naprave).
OPOMBA 3: stroji in oprema
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11111-1:2017
01-januar-2017
1DGRPHãþD
SIST EN ISO 11111-1:2016
Tekstilni stroji - Varnostne zahteve - 1. del: Splošne zahteve (ISO 11111-1:2016)
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-
1:2016)
Textilmaschinen - Sicherheitsanforderungen - Teil 1: Gemeinsame Anforderungen (ISO
11111-1:2016)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 1: Exigences communes
(ISO 11111-1:2016)
Ta slovenski standard je istoveten z: EN ISO 11111-1:2016
ICS:
59.120.01 Tekstilni stroji na splošno Textile machinery in general
SIST EN ISO 11111-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11111-1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11111-1:2017
EN ISO 11111-1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2016
EUROPÄISCHE NORM
ICS 59.120.01 Supersedes EN ISO 11111-1:2016
English Version
Textile machinery - Safety requirements - Part 1: Common
requirements (ISO 11111-1:2016)
Matériel pour l'industrie textile - Exigences de sécurité Textilmaschinen - Sicherheitsanforderungen - Teil 1:
- Partie 1: Exigences communes (ISO 11111-1:2016) Gemeinsame Anforderungen (ISO 11111-1:2016)
This European Standard was approved by CEN on 14 September 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-1:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11111-1:2017
EN ISO 11111-1:2016 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
requirements of EU Directive 2006/42/EC aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11111-1:2017
EN ISO 11111-1:2016 (E)
European foreword
This document (EN ISO 11111-1:2016) has been prepared by Technical Committee ISO/TC 72 "Textile
machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile machinery
and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 11111-1:2016.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11111-1:2016 has been approved by CEN as EN ISO 11111-1:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11111-1:2017
EN ISO 11111-1:2016 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
requirements of EU Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M 396
(Machinery) to provide a means of conforming to essential requirements of the New Approach Directive
2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2006/42/EC this EN
All essential requirements of All clauses are covered IMPORTANT — Compliance with the
Annex I are covered requirements of ISO 11111-1 and all
relevant machine specific parts of the
ISO 11111- series is necessary to
achieve presumption of conformity
with the relevant essential
requirements.
WARNING 1 Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this
standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 11111-1:2017
INTERNATIONAL ISO
STANDARD 11111-1
Third edition
2016-05-15
Textile machinery — Safety
requirements —
Part 1:
Common requirements
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 1: Exigences communes
Reference number
ISO 11111-1:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 11111-1:2017
ISO 11111-1:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11111-1:2017
ISO 11111-1:2016(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 4
4 List of significant hazards . 5
5 Safety requirements and/or measures for frequently occurring hazards .6
5.1 General . 6
5.2 Safety requirements for the different phases of “life” of a machine . 6
5.3 Risk reduction by design and safeguarding . 6
5.3.1 Inherently safe design measures . 6
5.3.2 Consideration of geometrical factors and physical aspects . 6
5.3.3 Reduction of risks by safeguarding . 6
5.4 Safety requirements for various hazards . 8
5.4.1 General. 8
5.4.2 Electrical hazards . 8
5.4.3 Mechanical hazards .11
5.4.4 Static electricity .14
5.4.5 Fluid power systems and components .15
5.4.6 Extreme temperatures .15
5.4.7 Noise reduction .16
5.4.8 Lasers . .16
5.4.9 Radiation . .16
5.4.10 Materials and substances .17
5.4.11 Fire .17
5.4.12 Explosion .18
5.4.13 Ergonomics .18
5.5 Devices for special operation .19
5.6 Access to elevated operating positions and servicing points .20
5.7 Measures for the escape and rescue of trapped persons .20
5.8 Fitting of parts .20
6 Significant hazards and corresponding safety requirements and/or measures for
certain machine elements and their combinations .21
6.1 General .21
6.2 Drive and transmission enclosures .21
6.3 Particularly dangerous machine elements .21
6.4 Machine elements which normally do not require safeguarding .23
6.4.1 Low risk machine elements .23
6.4.2 Machine elements out of reach .23
6.5 Rollers .24
6.6 Rotating shafts .30
6.7 Wheels .30
6.7.1 Running wheels . .30
6.7.2 Hand wheels .31
6.8 Doors and lids .32
6.8.1 General.32
6.8.2 Opening and closing .32
6.8.3 Locking and unlocking of doors or lids under pressure .32
6.8.4 Entry into machines, vessels or items of plant .33
6.9 Observation windows .34
6.10 Conveyors .34
6.11 Fans .35
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11111-1:2017
ISO 11111-1:2016(E)
6.12 Cutting devices .35
6.13 Working platforms and walkways on machines, work areas adjacent to tanks and pits .36
6.14 Radiators or burners for the direct heat treatment of yarn and fabric .37
6.15 Devices for steam heating of liquors .37
6.16 Liquor preparatory machinery incorporating stirrers .38
6.17 Dancing rollers .39
6.18 Batching devices .39
6.18.1 General Information . . .39
6.18.2 Surface-driven batcher .40
6.18.3 Centre batcher . .42
6.18.4 Ascending batch winder .45
6.18.5 Equipment for automatic process material change on batching devices .46
6.19 Mangles .48
6.20 Pilers and plaiters.49
6.21 Automatic machines and equipment .49
6.21.1 General.49
6.21.2 Automatic guards .49
6.21.3 Mobile machines, handling devices, operational parts .50
6.21.4 Mobile machines and handling devices which could leave their defined path .51
6.21.5 Floor-mounted and overhead rails (tracks) .51
6.21.6 Overhead transport of process material .52
6.22 Complex installations .52
7 Verification of the compliance with the safety requirements and/or measures .53
8 Information concerning machine use .53
8.1 Signals and warning devices .53
8.2 Accompanying documents (in particular: instruction handbook).53
8.3 Marking .54
Annex A (normative) Specifications .55
Annex B (normative) Hot surfaces .57
Annex C (normative) Verification methods .59
Annex D (normative) Nip between roller and fabric .70
Annex E (informative) List of machines and equipment used in the textile industry but not
within the scope of this part of ISO 11111 .71
Bibliography .72
iv © ISO 2016 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 11111-1:2017
ISO 11111-1:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (http://www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT), see the following URL: Foreword ‑ Supplementary information.
The committee responsible for this document is ISO/TC 72, Textile machinery and accessories,
Subcommittee SC 8, Safety requirements for textile machinery.
This third edition cancels and replaces the second edition (ISO 11111-1:2009), which has been
technically revised.
ISO 11111 consists of the following parts, under the general title Textile machinery — Safety requirements:
— Part 1: Common requirements
— Part 2: Spinning preparatory and spinning machines
— Part 3: Nonwoven machinery
— Part 4: Yarn processing, cordage and rope manufacturing machinery
— Part 5: Preparatory machinery to weaving and knitting
— Part 6: Fabric manufacturing machinery
— Part 7: Dyeing and finishing machinery
© ISO 2016 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 11111-1:2017
ISO 11111-1:2016(E)
Introduction
ISO 11111‑1 to ISO 11111‑7 were prepared simultaneously by ISO/TC 72 and CEN/TC 214, and adopted
under the Vienna Agreement in order to obtain identical standards on technical safety requirements
for the design and construction of textile machinery.
ISO 11111 as a whole is intended for use by any person concerned with the safety of textile machinery,
for example, textile machinery designers, manufacturers and systems integrators. It is also of interest
to users of textile machines and safety experts.
This part of ISO 11111 is a type C standard as stated in ISO 12100. The various parts of ISO 11111 deal
with significant hazards generated by machines used in the textile industry. The machinery concerned
and the extent to which hazards are covered are indicated in the scope of this part of ISO 11111.
When provisions of this type C standard are different from those which are stated in type A or B
standards, the provisions of this type C standard take precedence.
For machines or machine equipment not dealt with in the relevant parts of ISO 11111, the
designer performs a risk assessment according to ISO 12100 and provides means for reducing
the risk from significant hazards. These risk reduction measures that need to be identified by the
designer/manufacturer of the machinery by risk assessment are outside the scope of this standard.
This part of ISO 11111 contains a summary of safety requirements and/or measures for frequently
occurring hazards of textile machinery (see Clause 5) which apply whenever referred to in this, or the
other parts of ISO 11111.
Significant hazards and corresponding safety requirements and/or measures for certain machine
elements (e.g. rollers) and their combination of textile machines are also described (see Clause 6).
The various parts of ISO 11111 address significant hazards and corresponding safety requirements
and/or measures for specific types of textile machines. As far as possible, these are treated by way
of reference to Clauses 5 and 6 and other cross‑references (see general safety requirements), thus
reducing considerably the volume by avoiding many repetitions. The standard for a specific textile
machine will normally consist of this part of ISO 11111 and the specific part relevant to that machine.
ISO 11111‑2 to ISO 11111‑7 may also contain exceptions or additions to the requirements given in this
part of ISO 11111 (see specific safety requirements).
vi © ISO 2016 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 11111-1:2017
INTERNATIONAL STANDARD ISO 11111-1:2016(E)
Textile machinery — Safety requirements —
Part 1:
Common requirements
1 Scope
This part of ISO 11111 specifies safety requirements for frequently occurring hazards common to the
types of textile machinery and the hazards of certain machine elements covered by ISO 11111‑2 to
ISO 11111‑7. The standard series is complemented by the type C standards ISO 9902 (all parts) with
respect to noise emission measurement and ISO 23771 with respect to measures for the reduction of
noise emissions.
This part of ISO 11111 is applicable to machinery plant and related equipment intended to be used in
the textile industry for the following purposes:
— opening, cleaning, blending, carding, preparation subsequent to carding, spinning and other
processing of fibres (staple and filament) and other materials to form yarn or nonwoven material
(including felts);
— winding, doubling, twisting, texturing, etc., of yarns and the processing of yarns preparatory to
weaving and knitting;
— weaving, knitting, lace‑making and similar utilization of yarn, etc., to form fabric;
— forming of braid, cord, strand, rope, twine, net, etc., except take‑up reels of stranding an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.