SIST EN 319 142-1 V1.2.1:2024
(Main)Electronic Signatures and Infrastructures (ESI) - PAdES digital signatures - Part 1: Building blocks and PAdES baseline signatures
Electronic Signatures and Infrastructures (ESI) - PAdES digital signatures - Part 1: Building blocks and PAdES baseline signatures
The present document specifies PAdES digital signatures. PAdES signatures build on PDF signatures specified in
ISO 32000-1 [1] with an alternative signature encoding to support digital signature formats equivalent to the signature
format CAdES as specified in ETSI EN 319 122-1 [2], by incorporation of signed and unsigned attributes, which fulfil
certain common requirements (such as the long term validity of digital signatures) in a number of use cases.
The present document specifies formats for PAdES baseline signatures, which provide the basic features necessary for a
wide range of business and governmental use cases for electronic procedures and communications to be applicable to a
wide range of communities when there is a clear need for interoperability of digital signatures used in electronic
documents.
The present document defines four levels of PAdES baseline signatures addressing incremental requirements to
maintain the validity of the signatures over the long term, in a way that a certain level always addresses all the
requirements addressed at levels that are below it. Each level requires the presence of certain PAdES attributes, suitably
profiled for reducing the optionality as much as possible.
Procedures for creation, augmentation, and validation of PAdES digital signatures are out of scope and specified in
ETSI EN 319 102-1 [i.5]. Guidance on creation, augmentation and validation of PAdES digital signatures including the
usage of the different attributes defined in the present document is provided in ETSI TR 119 100 [i.4]. The present
document aims at supporting electronic signatures in different regulatory frameworks.
NOTE: Specifically but not exclusively, PAdES digital signatures specified in the present document aim at
supporting electronic signatures, advanced electronic signatures, qualified electronic signatures,
electronic seals, advanced electronic seals, and qualified electronic seals as per Regulation (EU)
No 910/2014 [i.2].
Elektronski podpisi in infrastruktura (ESI) - Digitalni podpisi PAdES - 1. del: Gradniki in izhodiščni podpisi PAdES
Ta dokument določa digitalne podpise PAdES. Podpisi PAdES temeljijo na podpisih PDF, določenih v standardu ISO 32000-1 [1], z nadomestnim kodiranjem za podporo formatov digitalnih podpisov, ki so enakovredni formatu podpisa CAdES, kot je določeno v standardu ETSI EN 319 122-1 [2], ter z vključitvijo podpisanih in nepodpisanih atributov, ki izpolnjujejo določene splošne zahteve (kot je dolgoročna veljavnost digitalnih podpisov) v številnih primerih uporabe.
Ta dokument določa specifične formate za izhodiščne podpise PAdES, ki zagotavljajo osnovne funkcije, zaradi katerih se lahko različni poslovni in vladni primeri uporabe za elektronske postopke in komunikacijo uporabijo za širok nabor skupnosti, kadar obstaja jasna potreba po interoperabilnosti digitalnih podpisov, uporabljenih v elektronskih dokumentih.
V tem dokumentu so določene štiri ravni izhodiščnih podpisov PAdES, ki obravnavajo naraščajoče zahteve po dolgoročnem ohranjanju veljavnosti podpisov, pri čemer določena raven vedno obravnava vse zahteve, obravnavane na njenih podravneh. Vsaka raven zahteva prisotnost določenih atributov PAdES, ki ustrezno zmanjšujejo možnost izbire.
Postopki izdelave, razširitve in potrjevanja digitalnih podpisov PAdES v tem dokumentu niso zajeti ter so določeni v standardu ETSI EN 319 102-1 [i.5]. Smernice glede izdelave, razširitve in potrjevanja digitalnih podpisov PAdES, vključno z uporabo različnih atributov, določenih v tem dokumentu, so podane v standardu ETSI TR 119 100 [i.4]. Namen tega dokumenta je zagotavljanje podpore za elektronske podpise v različnih regulativnih okvirjih.
OPOMBA: Namen digitalnih podpisov PAdES, določenih v tem dokumentu, je zlasti (vendar ne izključno) zagotavljanje podpore za elektronske podpise, napredne elektronske podpise, kvalificirane elektronske podpise, elektronske žige, napredne elektronske žige in kvalificirane elektronske žige skladno z Uredbo (EU) št. 910/2014 [i.2].
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 319 142-1 V1.2.0 (2023-10)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
PAdES digital signatures;
Part 1: Building blocks and PAdES baseline signatures
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 319 142-1 V1.2.0 (2023-10)
Reference
REN/ESI-0019142-1v121
Keywords
electronic signature, PAdES, profile, security
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 319 142-1 V1.2.0 (2023-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms .
...
ETSI EN 319 142-1 V1.2.1 (2024-01)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
PAdES digital signatures;
Part 1: Building blocks and PAdES baseline signatures
---------------------- Page: 1 ----------------------
2 ETSI EN 319 142-1 V1.2.1 (2024-01)
Reference
REN/ESI-0019142-1v121
Keywords
electronic signature, PAdES, profile, security
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 319 142-1 V1.2.1 (2024-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms .
...
SLOVENSKI STANDARD
SIST EN 319 142-1 V1.2.1:2024
01-marec-2024
Elektronski podpisi in infrastruktura (ESI) - Digitalni podpisi PAdES - 1. del:
Gradniki in izhodiščni podpisi PAdES
Electronic Signatures and Infrastructures (ESI) - PAdES digital signatures - Part 1:
Building blocks and PAdES baseline signatures
Ta slovenski standard je istoveten z: ETSI EN 319 142-1 V1.2.1 (2024-01)
ICS:
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST EN 319 142-1 V1.2.1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 319 142-1 V1.2.1:2024
---------------------- Page: 2 ----------------------
SIST EN 319 142-1 V1.2.1:2024
ETSI EN 319 142-1 V1.2.1 (2024-01)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
PAdES digital signatures;
Part 1: Building blocks and PAdES baseline signatures
---------------------- Page: 3 ----------------------
SIST EN 319 142-1 V1.2.1:2024
2 ETSI EN 319 142-1 V1.2.1 (2024-01)
Reference
REN/ESI-0019142-1v121
Keywords
electronic signature, PAdES, profile, security
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 319 142-1 V1.2.1:2024
3 ETSI EN 319 142-1 V1.2.1 (2024-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.