SIST EN ISO 16202-1:2020
(Main)Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral anomalies (ISO 16202-1:2019)
Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral anomalies (ISO 16202-1:2019)
This document provides a nomenclature of oral anomalies and a code for their representation to facilitate data entry and support interoperability at the semantic level.
This nomenclature covers the various anomalies that can be found in the oral cavity. When needed, information on the localization of the anomaly can be added through the use of other codes such as ISO 3950.
Zahnheilkunde - Nomenklatur der oralen Anomalien - Teil 1: Code für die Darstellung von oralen Anomalien (ISO 16202-1:2019)
Dieses Dokument beschreibt eine Nomenklatur für orale Anomalien von Zähnen und einen Code für ihre
Darstellung, um die Dateneingabe zu vereinfachen und die Interoperabilität auf semantischer Ebene zu
unterstützen.
Diese Nomenklatur umfasst die verschiedenen in der Mundhöhle vorhandenen Anomalien. Falls erforderlich,
können Angaben zur Lokalisierung der Anomalie durch die Anwendung weiterer Codes, wie etwa ISO 3950,
hinzugefügt werden.
Médecine bucco-dentaire - Nomenclature des anomalies bucco-dentaires - Partie 1: Code pour la représentation des anomalies bucco-dentaires (ISO 16202-1:2019)
Le présent document fournit une nomenclature des anomalies bucco-dentaires et un code pour leur représentation destinés à faciliter la saisie de données et à soutenir l'interopérabilité au niveau sémantique.
Cette nomenclature couvre les diverses anomalies qui peuvent être rencontrées dans la cavité buccale. Lorsque cela est nécessaire, il est possible d'ajouter des informations sur la localisation de l'anomalie en utilisant d'autres codes, tels que celui décrit dans l'ISO 3950.
Zobozdravstvo - Poimenovanje oralnih nepravilnosti - 1. del: Oznake za predstavitev oralnih nepravilnosti (ISO 16202-1:2019)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16202-1:2020
01-november-2020
Zobozdravstvo - Poimenovanje oralnih nepravilnosti - 1. del: Oznake za
predstavitev oralnih nepravilnosti (ISO 16202-1:2019)
Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral
anomalies (ISO 16202-1:2019)
Zahnheilkunde - Nomenklatur der oralen Anomalien - Teil 1: Code für die Darstellung
von oralen Anomalien (ISO 16202-1:2019)
Médecine bucco-dentaire - Nomenclature des anomalies bucco-dentaires - Partie 1:
Code pour la représentation des anomalies bucco-dentaires (ISO 16202-1:2019)
Ta slovenski standard je istoveten z: EN ISO 16202-1:2020
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
SIST EN ISO 16202-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16202-1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 16202-1:2020
EN ISO 16202-1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2020
EUROPÄISCHE NORM
ICS 11.060.01
English Version
Dentistry - Nomenclature of oral anomalies - Part 1: Code
for the representation of oral anomalies (ISO 16202-
1:2019)
Médecine bucco-dentaire - Nomenclature des Zahnheilkunde - Nomenklatur der oralen Anomalien -
anomalies bucco-dentaires - Partie 1: Code pour la Teil 1: Code für die Darstellung von oralen Anomalien
représentation des anomalies bucco-dentaires (ISO (ISO 16202-1:2019)
16202-1:2019)
This European Standard was approved by CEN on 10 August 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16202-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16202-1:2020
EN ISO 16202-1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16202-1:2020
EN ISO 16202-1:2020 (E)
European foreword
The text of ISO 16202-1:2019 has been prepared by Technical Committee ISO/TC 106 "Dentistry” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 16202-1:2020
by Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16202-1:2019 has been approved by CEN as EN ISO 16202-1:2020 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16202-1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 16202-1:2020
INTERNATIONAL ISO
STANDARD 16202-1
First edition
2019-05
Dentistry — Nomenclature of oral
anomalies —
Part 1:
Code for the representation of oral
anomalies
Médecine bucco-dentaire — Nomenclature des anomalies bucco-
dentaires —
Partie 1: Code pour la représentation des anomalies bucco-dentaires
Reference number
ISO 16202-1:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 16202-1:2020
ISO 16202-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16202-1:2020
ISO 16202-1:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Structure of the Code . 1
Bibliography .
...
SLOVENSKI STANDARD
oSIST prEN ISO 16202-1:2020
01-junij-2020
Zobozdravstvo - Poimenovanje oralnih nepravilnosti - 1. del: Oznake za
predstavitev oralnih nepravilnosti (ISO 16202-1:2019)
Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral
anomalies (ISO 16202-1:2019)
Zahnheilkunde - Nomenklatur der oralen Anomalien - Teil 1: Code für die Darstellung
von oralen Anomalien (ISO 16202-1:2019)
Médecine bucco-dentaire - Nomenclature des anomalies bucco-dentaires - Partie 1:
Code pour la représentation des anomalies bucco-dentaires (ISO 16202-1:2019)
Ta slovenski standard je istoveten z: prEN ISO 16202-1
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
oSIST prEN ISO 16202-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 16202-1:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 16202-1:2020
INTERNATIONAL ISO
STANDARD 16202-1
First edition
2019-05
Dentistry — Nomenclature of oral
anomalies —
Part 1:
Code for the representation of oral
anomalies
Médecine bucco-dentaire — Nomenclature des anomalies bucco-
dentaires —
Partie 1: Code pour la représentation des anomalies bucco-dentaires
Reference number
ISO 16202-1:2019(E)
©
ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 16202-1:2020
ISO 16202-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 16202-1:2020
ISO 16202-1:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Structure of the Code . 1
Bibliography . 3
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 16202-1:2020
ISO 16202-1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
ex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.