SIST EN ISO 22074-3:2024
(Main)Railway infrastructure - Rail fastening systems - Part 3: Proof load test method for pull-out resistance (ISO 22074-3:2021)
Railway infrastructure - Rail fastening systems - Part 3: Proof load test method for pull-out resistance (ISO 22074-3:2021)
This document specifies a test procedure to confirm that the force necessary to pull the anchorage of a rail fastening assembly out of the sleeper or other supporting element is greater than a prescribed value (i.e. it is a "proof load" test).
This test is for components of the fastening system which are:
a) cast into concrete during the manufacture of sleepers or other supporting elements;
b) glued into the cast or drilled holes in concrete; or
c) screwed or otherwise attached to wood, polymeric composite or steel sleepers or other supporting elements.
This test is not applicable to embedded rails.
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 3: Belastungsprüfung für den Auszugswiderstand (ISO 22074-3:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 3: Méthode d'essai de charge d'épreuve pour la résistance à l'arrachement (ISO 22074-3:2021)
Ce document spécifie une procédure d'essai pour confirmer que la force nécessaire pour arracher l'ancrage d'un système de fixation de rail de la traverse ou d'un autre élément de support est supérieure à une valeur spécifiée (c'est-à-dire qu'il s'agit d'un essai de " charge de preuve ").
Cet essai concerne les composants des systèmes de fixation suivants:
a) coulée dans le béton lors de la fabrication des traverses ou d'autres éléments de support;
b) collés dans les trous coulés ou percés dans le béton; ou
c) vissés ou autrement fixés à des traverses en bois, en composite polymère ou en acier ou à d'autres éléments de support.
Le présent essai ne s'applique pas aux rails enrobés.
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 3. del: Metoda preskušanja izvlečne odpornosti z določenim obremenjevanjem (ISO 22074-3:2021)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22074-3:2024
01-maj-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 3. del: Metoda
preskušanja izvlečne odpornosti z določenim obremenjevanjem (ISO 22074-
3:2021)
Railway infrastructure - Rail fastening systems - Part 3: Proof load test method for pull-
out resistance (ISO 22074-3:2021)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 3: Belastungsprüfung für den
Auszugswiderstand (ISO 22074-3:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 3: Méthode d'essai de
charge d'épreuve pour la résistance à l'arrachement (ISO 22074-3:2021)
Ta slovenski standard je istoveten z: EN ISO 22074-3:2024
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN ISO 22074-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22074-3:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 22074-3:2024
EN ISO 22074-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 45.080
English Version
Railway infrastructure - Rail fastening systems - Part 3:
Proof load test method for pull-out resistance (ISO 22074-
3:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail Bahninfrastruktur - Schienenbefestigungssysteme -
- Partie 3: Méthode d'essai de charge d'épreuve pour la Teil 3: Belastungsprüfung für den Auszugswiderstand
résistance à l'arrachement (ISO 22074-3:2021) (ISO 22074-3:2021)
This European Standard was approved by CEN on 23 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22074-3:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22074-3:2024
EN ISO 22074-3:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22074-3:2024
EN ISO 22074-3:2024 (E)
European foreword
The text of ISO 22074-3:2021 has been prepared by Technical Committee ISO/TC 269 “Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22074-3:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of
...
SLOVENSKI STANDARD
oSIST prEN ISO 22074-3:2024
01-februar-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 3. del: Metoda
preskušanja izvlečne odpornosti z določenim obremenjevanjem (ISO 22074-
3:2021)
Railway infrastructure - Rail fastening systems - Part 3: Proof load test method for pull-
out resistance (ISO 22074-3:2021)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 3: Belastungsprüfung für den
Auszugswiderstand (ISO 22074-3:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 3: Méthode d'essai de
charge d'épreuve pour la résistance à l'arrachement (ISO 22074-3:2021)
Ta slovenski standard je istoveten z: prEN ISO 22074-3
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN ISO 22074-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22074-3:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22074-3:2024
INTERNATIONAL ISO
STANDARD 22074-3
First edition
2021-03
Railway infrastructure — Rail
fastening systems —
Part 3:
Proof load test method for pull-out
resistance
Infrastructure ferroviaire — Systèmes de fixation du rail —
Partie 3: Méthode d'essai de charge d'épreuve pour la résistance à
l'arrachement
Reference number
ISO 22074-3:2021(E)
©
ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22074-3:2024
ISO 22074-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22074-3:2024
ISO 22074-3:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Test specimens. 2
6.1 Rail support . 2
6.2 Fastening components . 2
7 Procedure. 3
7.1 Preparation for test . 3
7.2 Loading and measurement of force. 3
7.3 Inspection .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.