SIST EN ISO 10052:2005/A1:2010
(Amendment)Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1 (ISO 10052:2004/Amd 1:2010)
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1 (ISO 10052:2004/Amd 1:2010)
This document specifies field survey methods for measuring: a) airborne sound insulation between rooms; b) impact sound insulation of floors; c) airborne sound insulation of façades; and d) sound pressure levels in rooms caused by service equipment. The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3. For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of EN ISO 717-1 and EN ISO 717-2. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.
Akustik - Messung der Luftschalldämmung und Trittschalldämmung und des Schalls von haustechnischen Anlagen in Gebäuden - Kurzverfahren - Änderung 1 (ISO 10052:2004/Amd 1:2010)
Acoustique - Mesurages in situ de l'isolement aux bruits aériens et de la transmission des bruits de choc ainsi que du bruit des équipements - Méthode de contrôle - Amendement 1 (ISO 10052:2004/Amd 1:2010)
Akustika - Terenska merjenja izolirnosti pred zvokom v zraku in udarnim zvokom - Informativna metoda - Dopolnilo 1 (ISO 10052:2004/Amd 1:2010)
Amandma A1:2010 je dodatek k standardu SIST EN ISO 10052:2005
Ta dokument določa terenske informativne metode za merjenje: a) izolirnosti pred zvokom v zraku med sobami; b) izolirnosti tal pred udarnim zvokom; c) izolirnosti fasad pred zvokom v zraku; in d) stopenj zvočnega tlaka v sobah, ki je povzročen s servisno opremo. Metode, opisane v tem dokumentu, veljajo za merjenje v sobah bivališč ali v sobah primerljive velikosti z maksimalno velikostjo 150 m3. Za izolirnost pred zvokom v zraku, izolirnost pred udarnim zvokom in zvočno izolirnost fasad metoda podaja vrednosti, ki so (oktavni pas) odvisne od frekvenc. Lahko se pretvorijo v eno število, ki označuje akustično delovanje z uporabo EN ISO 717-2 in EN ISO 717-2. Za zvok servisne opreme so rezultati podani naravnost v A ali C – ovrednotene stopnje zvočnega tlaka.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10052:2005/A1:2010
01-julij-2010
Akustika - Terenska merjenja izolirnosti pred zvokom v zraku in udarnim zvokom -
Informativna metoda - Dopolnilo 1 (ISO 10052:2004/Amd 1:2010)
Acoustics - Field measurements of airborne and impact sound insulation and of service
equipment sound - Survey method - Amendment 1 (ISO 10052:2004/Amd 1:2010)
Akustik - Messung der Luftschalldämmung und Trittschalldämmung und des Schalls von
haustechnischen Anlagen in Gebäuden - Kurzverfahren - Änderung 1 (ISO
10052:2004/Amd 1:2010)
Acoustique - Mesurages in situ de l'isolement aux bruits aériens et de la transmission
des bruits de choc ainsi que du bruit des équipements - Méthode de contrôle -
Amendement 1 (ISO 10052:2004/Amd 1:2010)
Ta slovenski standard je istoveten z: EN ISO 10052:2004/A1:2010
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10052:2005/A1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10052:2005/A1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 10052:2005/A1:2010
EUROPEAN STANDARD
EN ISO 10052:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2010
ICS 17.140.20; 91.120.20; 91.140.01
English Version
Acoustics - Field measurements of airborne and impact sound
insulation and of service equipment sound - Survey method -
Amendment 1 (ISO 10052:2004/Amd 1:2010)
Acoustique - Mesurages in situ de l'isolement aux bruits Akustik - Messung der Luftschalldämmung und
aériens et de la transmission des bruits de choc ainsi que Trittschalldämmung und des Schalls von haustechnischen
du bruit des équipements - Méthode de contrôle - Anlagen und Gebäuden - Kurzverfahren - Änderung 1 (ISO
Amendement 1 (ISO 10052:2004/Amd 1:2010) 10052:2004/Amd 1:2010)
This amendment A1 modifies the European Standard EN ISO 10052:2004; it was approved by CEN on 29 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10052:2004/A1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10052:2005/A1:2010
EN ISO 10052:2004/A1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10052:2005/A1:2010
EN ISO 10052:2004/A1:2010 (E)
Foreword
This document (EN ISO 10052:2004/A1:2010) has been prepared by Technical Committee CEN/TC 126
“Acoustic properties of building elements and of buildings”, the secretariat of which is held by AFNOR, in
collaboration with Technical Committee ISO/TC 43 "Acoustics".
This Amendment to the European Standard EN ISO 10052:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2010, and
conflicting national standards shall be withdrawn at the latest by November 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10052:2005/A1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 10052:2005/A1:2010
INTERNATIONAL ISO
STANDARD 10052
First edition
2004-12-15
AMENDMENT 1
2010-05-15
Acoustics — Field measurements of
airborne and impact sound insulation and
of service equipment sound — Survey
method
AMENDMENT 1
Acoustique — Mesurages in situ de l'isolement aux bruits aériens et de
la transmission des bruits de choc ainsi que du bruit des
équipements — Méthode de contrôle
AMENDEMENT 1
Reference number
ISO 10052:2004/Amd.1:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 10052:2005/A1:2010
ISO 10052:2004/Amd.1:2010(E)
PDF disclaimer
This PDF file may contain emb
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.