SIST EN ISO 9902-4:2002
(Main)Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
This Part 4 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: - yarn processing (e.g. doubling, twisting and texturing machines, reeling and winding machines, ball winding machines); etc.
Textilmaschinen - Geräuschmessverfahren - Teil 4: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen (ISO 9902-4:2001)
Dieser Teil 4 der Norm ergänzt Teil 1 und spezifiert mit ihm zusammen die Aufstellungs- und Befestigungsbedingungen, die Betriebßustände und Meßbedingungen für Messung, Angabe und Nachprüfung der Geräusche, die von verschiedenen Arten von Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen abgestrahlt werden. Er gilt für Methoden der Genauigkeitsklasse 2 und der Genauigkeitsklasse 3, die in den genannten Normen definiert sind.
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 4: Machines de transformation du fil et machines de production de cordages et articles de corderie (ISO 9902-4:2001)
La présente partie de l'ISO 9902, conjointement à l'ISO 9902-1, spécifie les conditions de montage, de fonctionnement et de mesurage nécessaires pour le mesurage, la déclaration et la vérification du bruit émis par différents types de machines de transformation du fil et de production de cordages et articles de corderie. La présente partie de l'ISO 9902 est applicable aux méthodes d'expertise (classe 2) et de contrôle (classe 3), conformément aux Normes internationales auxquelles il est fait référence, et à différents types de machines utilisées pour - la transformation du fil (par exemples doubleuse, retordeuse, machines de texturation, dévidoirs, bobinoirs, pelotonneuses), - la production de cordages et articles de corderie (par exemples machines d'étirage directionnel ou étaleurs, briseurs, bancs d'étirage et finisseurs), - le toronnage et le câblage combinés, la production de câblage avec dispositifs de toronnage intégrés, et - le tressage.
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 4. del: Stroji za predelavo preje in stroji za proizvodnjo sukanca in vlaken/niti (ISO 9902-4:2001)
4. del standarda dopolnjuje 1. del in skupaj z njim določa zahteve za priključitev, delovanje in merjenje, potrebne za merjenje, deklariranje in preverjanje hrupa, ki ga oddajajo različne vrste strojev za pripravo preje in predilnih strojev. Uporablja se za inženirske metode (razred 2) in raziskovalne metode (razred 3), opredeljene v navedenih standardih. Obravnava stroje za: – predelavo preje (npr. stroji za združevanje, sukanje in teksturiranje, stroji za odvijanje in navijanje preje, stroji za navijanje v klobčič) itd.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9902-4:2002
01-november-2002
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 4. del: Stroji za predelavo
preje in stroji za proizvodnjo sukanca in vlaken/niti (ISO 9902-4:2001)
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope
manufacturing machinery (ISO 9902-4:2001)
Textilmaschinen - Geräuschmessverfahren - Teil 4: Garnverarbeitungs-, Seilereiwaren-
und Seilereimaschinen (ISO 9902-4:2001)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 4: Machines de
transformation du fil et machines de production de cordages et articles de corderie (ISO
9902-4:2001)
Ta slovenski standard je istoveten z: EN ISO 9902-4:2001
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.01 Tekstilni stroji na splošno Textile machinery in general
SIST EN ISO 9902-4:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9902-4:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 9902-4:2002
EUROPEAN STANDARD
EN ISO 9902-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2001
ICS 17.140.20; 59.120.01
English version
Textile machinery - Noise test code - Part 4: Yarn processing,
cordage and rope manufacturing machinery (ISO 9902-4:2001)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 4:
Partie 4: Machines de transformation du fil et machines de Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen
production de cordages et articles de corderie (ISO (ISO 9902-4:2001)
9904:2001)
This European Standard was approved by CEN on 15 March 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-4:2001 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9902-4:2002
Page 2
EN ISO 9902-4:2001
Foreword
The text of the International Standard ISO 9902-4:2001 has been prepared by Technical Committee ISO/TC
72 "Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with
Technical Committee CEN/TC 214 "Textile machinery and machinery for dry-cleaning and industrial laundry",
the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2001, and conflicting national standards shall be
withdrawn at the latest by September 2001.
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 9902-4:2001 was approved by CEN as a European Standard
without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).
Attention is drawn to the possibility that some of the elements of this International Standard may be the
subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
This first edition of ISO 9902-4, together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-5,
ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised.
ISO 9902 consists of the following parts, under the general title Textile machinery - Noise test code:
- Part 1: Common requirements
- Part 2: Spinning preparatory and spinning machinery
- Part 3: Nonwoven machinery
- Part 4: Yarn processing, cordage and rope manufact
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.