11.060.25 - Dental instruments
Dental instruments
Dentalinstrumente
Instruments dentaires
Zobotehnični instrumenti
General Information
This document specifies requirements and test methods for hand-held and mechanically operated
instruments used for shaping and cleaning root canals, and which are not specified in other parts of the
ISO 3630 series.
This document specifies requirements for size, marking, product designation, safety considerations,
labelling and packaging.
- Standard15 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft12 pagesEnglish language
sale 10% off- e-Library read for1 day
This document is one of a series of standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange.
This document specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card and encoding technique. It takes into consideration both human and machine aspects and states minimum requirements.
Coercivity influences many of the quantities speci...view more
- Standard27 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft23 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements and their test methods for stainless steels used in
dental instruments.
It is applicable to single-use and reusable instruments, regardless of whether they are connected to a
power-driven system or not.
It contains a current selection of stainless steels suitable for use in the manufacture of dental
instruments.
- Standard24 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft21 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements, test methods, instructions for use and marking for multifunction handpieces (colloquially called "syringes") intended to be used in the oral cavity of the patient. This document does not apply to dental handpieces and motors, intraoral cameras, dental polymerisation lamps, powered scalers, powder jet handpieces, prophy handpieces, suction cannulas and saliva ejectors.
- Standard18 pagesEnglish language
sale 15% off- Standard19 pagesFrench language
sale 15% off
EN-ISO 7782-2 specifies dimensional and other requirements for the 11 most commonly used carbide cutters which are predominantly used in the dental laboratory.
- Standard17 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft15 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies general requirements and test methods for metallic dental tweezers of the Meriam type and for College type.
This document is not applicable to anatomical tweezers and surgical tweezers.
- Standard18 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies general requirements and test methods for endodontic instruments used for endodontic purposes, e.g. enlargers, compactors, accessory instruments, shaping and cleaning instruments, and a numeric coding system. In addition, it covers general size designations, color-coding, packaging, and identification symbols.
- Standard29 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft26 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies general requirements and test methods for endodontic instruments used for endodontic purposes, e.g. enlargers, compactors, accessory instruments, shaping and cleaning instruments, and a numeric coding system. In addition, it covers general size designations, color-coding, packaging, and identification symbols.
- Standard29 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft26 pagesEnglish language
sale 10% off- e-Library read for1 day
2019-01-21: Parallel process missed, so adoption of published ISO
- Amendment11 pagesEnglish language
sale 10% off- e-Library read for1 day
- Amendment8 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements and test methods for reusable intra-oral mirrors with a coated
glass reflecting surface used for dental purposes in the oral cavity.
In addition, specific requirements for metallic casing and metallic handles are given.
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 9687:2015 specifies graphical symbols for dental equipment. It is intended that the symbols are to be used on the appropriate piece of dental equipment and in documents pertaining to dental equipment, for example in instructions for use, marking, labelling, and technical product documentation.
- Amendment7 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 21533:2018 specifies requirements and test methods for reprocessable cartridge syringes intended for intraligamentary injections.
ISO 21533:2018 specifies requirements for cartridge syringes with ISO metric thread sizes, and only intended for intraligamentary injections. However, attention is drawn to the existence of a variety of syringes with imperial thread sizes (see Annex A).
- Standard15 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements and test methods for handpieces and motors used in dentistry
for treatment of patients and having patient contact, regardless of their construction. It also specifies
requirements for manufacturer’s information, marking and packaging.
This document is applicable to the following:
a) straight and angle handpieces;
b) high-speed air turbine handpieces;
c) air motors;
d) electrical motors;
e) prophy handpieces.
This document is not applicable to the fol...view more
- Standard43 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 14457:2017 specifies requirements and test methods for handpieces and motors used in dentistry for treatment of patients and having patient contact, regardless of their construction. It also specifies requirements for manufacturer's information, marking and packaging.
ISO 14457:2017 is applicable to the following:
a) straight and angle handpieces;
b) high-speed air turbine handpieces;
c) air motors;
d) electrical motors;
e) prophy handpieces.
ISO 14457:2017 is not applicable to the fo...view more
- Standard43 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 14457:2017 specifies requirements and test methods for handpieces and motors used in dentistry for treatment of patients and having patient contact, regardless of their construction. It also specifies requirements for manufacturer's information, marking and packaging. ISO 14457:2017 is applicable to the following: a) straight and angle handpieces; b) high-speed air turbine handpieces; c) air motors; d) electrical motors; e) prophy handpieces. ISO 14457:2017 is not applicable to the following...view more
- Standard35 pagesFrench language
sale 15% off- Standard34 pagesEnglish language
sale 15% off
This document specifies dimensional and other requirements for the three most commonly used
carbide cutters for milling machines which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters (for example, spiralled blades or cross-cut) are not covered
by this document.
Cutters intended for use with CAD/CAM systems are excluded from the scope of this document.
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This International Standard specifies requirements and their test methods for sinus elevator used in dentistry especially for lateral approach of sinus floor elevation. It also specifies the requirements for their marking and labelling.
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
This International Standard specifies requirements and test methods for filling instruments with working ends with contra set, used for the restoration of teeth with plastic filling materials. It also specifies requirements for their design, dimensions and marking.
- Standard17 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies the requirements for dimensions and material properties of shanks used
in dentistry for rotary or oscillating instruments. It describes the measurement methods for the
verification of the requirements.
This document is not applicable to tips fixed to the handpiece with a screw, e.g. scaler tips.
Information about the location of marking is also given. Annex A on quality control is included in order
to ensure a high quality level.
- Standard18 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 19490:2017 specifies requirements and their test methods for sinus membrane elevators used during the placement of dental implants for sinus floor lifting. It also specifies the requirements for their marking and labelling.
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day