71.120 - Equipment for the chemical industry
Equipment for the chemical industry
Ausrustungen fur die chemische Industrie
Materiel pour l'industrie chimique
Oprema za kemijsko industrijo
General Information
This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. This document is applicable to hydrogen generators that use the following types of ion transport medium: — group of aqueous bases; — group of aqueous acids; — solid polymeric materials with acidic function group additions, such as acid prot...view more
- Standard48 pagesEnglish language
sale 15% off
This document specifies requirements and gives recommendations for the mechanical design,
material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat
exchangers for the petroleum, petrochemical and natural gas industries.
This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable
with the exceptions specified in this document.
This document is applicable to the following types of shell-and-tube heat exchan...view more
- Standard12 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines.
ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 k...view more
- Draft152 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard139 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10439-2:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-2:2015 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in ISO 10439-1. These machines do ...view more
- Draft69 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard83 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10439-4:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439‑4:2015 specifies requirements for expander-compressors, in addition to the general requirements specified in ISO 10439‑1:2015.
- Draft70 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard61 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10439-3:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-4:2015 specifies integrally geared centrifugal compressors in conjunction with ISO 10439‑1.
- Draft105 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard77 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines. ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kP...view more
- Standard141 pagesFrench language
sale 15% off- Standard129 pagesEnglish language
sale 15% off
ISO 10439-4:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439‑4:2015 specifies requirements for expander-compressors, in addition to the general requirements specified in ISO 10439‑1:2015.
- Standard52 pagesEnglish language
sale 15% off- Standard58 pagesFrench language
sale 15% off
ISO 10439-3:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-4:2015 specifies integrally geared centrifugal compressors in conjunction with ISO 10439‑1.
- Standard68 pagesEnglish language
sale 15% off- Standard67 pagesFrench language
sale 15% off
ISO 10439-2:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-2:2015 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in ISO 10439-1. These machines do ...view more
- Standard75 pagesFrench language
sale 15% off- Standard74 pagesEnglish language
sale 15% off
1.1 This document applies to centrifuges aiming at separation of liquid/liquid/solid/solid or at least two of these substances. It gives requirements to minimise the risks caused by the hazards specified in 1.2.
This document deals with the significant hazards associated with the operation of centrifuges.
1.2 This document gives requirements for minimising the risks caused by the following hazards:
- mechanical hazards common to all types of centrifuges, except those specified in 1.4;
- ergo...view more
- Draft63 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard66 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62703:2013 specifies the general aspects in the terminology and definitions related to the performance of fluorometric oxygen analyzers used for the continuous determination of dissolved oxygen partial pressure or concentration in liquid media; unifies methods used in making and verifying statements on the functional performance of such analyzers; specifies which tests should be performed in order to determine the functional performance and how such tests should be carried out and provides b...view more
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62703:2013 specifies the general aspects in the terminology and definitions related to the performance of fluorometric oxygen analyzers used for the continuous determination of dissolved oxygen partial pressure or concentration in liquid media; unifies methods used in making and verifying statements on the functional performance of such analyzers; specifies which tests should be performed in order to determine the functional performance and how such tests should be carried out and provides b...view more
- Standard85 pagesEnglish and French language
sale 15% off
This International Standard specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of spiral plate heat exchangers for the petroleum, petrochemical and natural gas industries. It is applicable to stand-alone spiral plate heat exchangers and those integral with a pressure vessel.
- Draft48 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
This International Standard specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of hairpin heat exchangers for use in the petroleum, petrochemical and natural gas industries. Hairpin heat exchangers include double-pipe and multi-tube type heat exchangers.
- Draft52 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard54 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 12212:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of hairpin heat exchangers for use in the petroleum, petrochemical and natural gas industries.
Hairpin heat exchangers include double-pipe and multi-tube type heat exchangers.
- Draft52 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard54 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 12211:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of spiral plate heat exchangers for the petroleum, petrochemical and natural gas industries.
ISO 12211:2012 is applicable to stand‑alone spiral plate heat exchangers and those integral with a pressure vessel.
- Draft48 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13706:2011 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries.
ISO 13706:2011 is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.
- Draft153 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard151 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13706:2011 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries.
ISO 13706:2011 is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.
- Draft153 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard151 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13709:2009 specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services.
ISO 13709:2009 is applicable to overhung pumps, between-bearings pumps and vertically-suspended pumps
- Standard193 pagesEnglish language
sale 10% off- e-Library read for1 day