ETSI TS 136 521-2 V19.1.0 (2026-04)

LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 2: Implementation Conformance Statement (ICS) (3GPP TS 36.521-2 version 19.1.0 Release 19)

RTS/TSGR-0536521-2vj10

General Information

• Status: Not Published
• Technical Committee: 3GPP RAN 5 - Mobile Terminal Conformance Testing (formely T1)
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Completion Date: 02-Apr-2026

Standards Content (Sample)

TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA);
User Equipment (UE) conformance specification;
Radio transmission and reception;
Part 2: Implementation Conformance Statement (ICS)
(3GPP TS 36.521-2 version 19.1.0 Release 19)


3GPP TS 36.521-2 version 19.1.0 Release 19 1 ETSI TS 136 521-2 V19.1.0 (2026-04)

Reference
RTS/TSGR-0536521-2vj10
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2026.
All rights reserved.
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 2 ETSI TS 136 521-2 V19.1.0 (2026-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™, LTE™ and 5G™ logo are trademarks of ETSI registered for the benefit of its Members and of the
3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of ®
the oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found at 3GPP to ETSI numbering cross-referencing.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 3 ETSI TS 136 521-2 V19.1.0 (2026-04)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Recommended test case applicability . 7
4.1 RF conformance test cases . 8
4.2 RRM conformance test cases . 232
4.3 RF and RRM conformance test cases for NB-IoT/eMTC NTN . 336
4.3.1 RF conformance test cases for NB-IoT/eMTC NTN . 336
4.3.2 Performance conformance test cases for NB-IoT/eMTC NTN. 340
4.3.3 RRM conformance test cases for NB-IoT/eMTC NTN . 342
Annex A (normative):ICS proforma for E-UTRA User Equipment . 349
A.1 Guidance for completing the ICS proforma . 349
A.1.1 Purposes and structure . 349
A.1.2 Abbreviations and conventions . 349
A.1.3 Instructions for completing the ICS proforma . 350
A.2 Identification of the User Equipment . 350
A.2.1 Date of the statement . 350
A.2.2 User Equipment Under Test (UEUT) identification . 350
A.2.3 Product supplier . 351
A.2.4 Client . 351
A.2.5 ICS contact person . 352
A.3 Identification of the protocol . 352
A.4 ICS proforma tables. 352
A.4.1 UE Implementation Types . 352
A.4.2 UE Service Capabilities . 353
A.4.3 Baseline Implementation Capabilities . 353
A.4.4 Feature group indicators . 371
A.4.5 Additional information . 420
A.4.6 CA Physical Layer Baseline Implementation Capabilities . 433
A.4.6.1 Intra-band contiguous CA Physical Layer Baseline Implementation Capabilities . 434
A.4.6.2 Intra-band non-contiguous CA Physical Layer Baseline Implementation Capabilities . 440
A.4.6.3 Inter-band CA Physical Layer Baseline Implementation Capabilities . 444
A.4.7 Category M1 UE Centre Frequency Implementation . 465
Annex B (informative): Status of CA configurations in 3GPP UE conformance test specifications . 466
Annex C (informative): Change history . 467
History . 487

ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 4 ETSI TS 136 521-2 V19.1.0 (2026-04)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
The present document is part 2 of a multi-parts TS:
3GPP TS 36.521-1 [1]: Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
conformance specification Radio transmission and reception Part 1: Conformance testing.
3GPP TS 36.521-2: Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
conformance specification Radio transmission and reception Part :2 Implementation Conformance
Statement (ICS).
3GPP TS 36.521-3 [2]: Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
conformance specification Radio transmission and reception Part 3: Radio Resource Management (RRM)
Conformance Testing.
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 5 ETSI TS 136 521-2 V19.1.0 (2026-04)
1 Scope
The present document provides the Implementation Conformance Statement (ICS) proforma for 3G Evolved Universal
Terrestrial Radio Access (E-UTRA) User Equipment (UE), in compliance with the relevant requirements, and in
accordance with the relevant guidance given in ISO/IEC 9646-1 [3] and ISO/IEC 9646-7 [4]
The present document specifies the recommended applicability statement for the test cases included in 3GPP TS
36.521-1 [1], 3GPP TS 36.521-3 [2] and 3GPP TS 36.521-4 [20]. These applicability statements are based on the
features implemented in the UE.
Special conformance testing functions can be found in 3GPP TS 36.509 [5] and the common test environments are
included in 3GPP TS 36.508 [6].
The present document is valid for UE implemented according to 3GPP releases starting from Release 8 up to the
Release indicated on the cover page of the present document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document unless the context in which the reference is made suggests a different Release is
relevant (information on the applicable release in a particular context can be found in e.g. test case title,
description or applicability, message description or content).
[1] 3GPP TS 36.521-1: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment
(UE) conformance specification Radio transmission and reception Part 1: Conformance testing ".
[2] 3GPP TS 36.521-3: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment
(UE) conformance specification Radio transmission and reception Part 3: Radio Resource
Management Conformance Testing ".
[3] ISO/IEC 9646-1: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[4] ISO/IEC 9646-7: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[5] 3GPP TS 36.509: " Evolved Universal Terrestrial Radio Access (E-UTRA); Special conformance
testing functions for User Equipment ".
[6] 3GPP TS 36.508: "Evolved Universal Terrestrial Radio Access (E-UTRA); Common Test
Environments for User Equipment (UE) Conformance Testing".
[7] Void
[8] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[9] 3GPP TS 36.201: " LTE Physical Layer - General Description"
[10] 3GPP TS 36.302: " Evolved Universal Terrestrial Radio Access (E-UTRA); Services provided by
the physical layer for E-UTRA".
[11] 3GPP TS 36.321: "Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access
Control (MAC) protocol specification".
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 6 ETSI TS 136 521-2 V19.1.0 (2026-04)
[12] 3GPP TS 36.322: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Link Control
(RLC) protocol specification".
[13] 3GPP TS 36.323: "Evolved Universal Terrestrial Radio Access (E-UTRA); Packet Data
Convergence Protocol (PDCP) specification".
[14] 3GPP TS 36.331: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource
Control (RRC) Protocol Specification".
[15] 3GPP TS 24.301: "Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage
3"
[16] 3GPP TS 36.307: "Requirements on User Equipments (UEs) Supporting a release-independent
frequency band".
[17] 3GPP TS 36.306: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio access capabilities".
[18] 3GPP TS 36.133: "Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for
support of radio resource management".
[19] 3GPP TS 36.101: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio transmission and reception".
[20] 3GPP TS 36.521-4: "Evolved Universal Terrestrial Radio Access (E-UTRA);User Equipment
(UE) conformance specification; Radio transmission and reception; Part 4: Satellite access Radio
Frequency (RF) and performance Conformance Testing"
[21] 3GPP TS 36.102: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio transmission and reception for satellite access".
3 Definitions, symbols and abbreviations
For the purposes of the present document, the following terms, definitions, symbols and abbreviations apply:
- such given in TR 21.905 [8]
- such given in ISO/IEC 9646-1 [3] and ISO/IEC 9646-7 [4]
NOTE: Some terms and abbreviations defined in [3] and [4] are explicitly included below with small
modification to reflect the terminology used in 3GPP.
3.1 Definitions
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system
claimed to conform to a given specification, stating which capabilities have been implemented
ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system
becomes an ICS
Protocol Implementation Conformance Statement (PICS): An ICS for an implementation or system claimed to
conform to a given protocol specification
static conformance review: A review of the extent to which the static conformance requirements are claimed to be
supported by the UEUT, by comparing the answers in the ICS(s) with the static conformance requirements expressed in
the relevant specification(s)
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 7 ETSI TS 136 521-2 V19.1.0 (2026-04)
3.2 Symbols
No specific symbols have been identified so far.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in TR 21.905 [1] and the following apply. An
abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in
TR 21.905 [8].
For the purposes of the present document, the following abbreviations apply:
ICS Implementation Conformance Statement
PICS Protocol Implementation Conformance Statement
RRM Radio Resource Management
SCS System Conformance Statement
TC Test Case
UEUT User Equipment Under Test
4 Recommended test case applicability
The applicability of each individual test is identified in the tables 4.1-1 or 4.2-1. This is just a recommendation based on
the purpose for which the test case was written.
The applicability of every test is formally expressed by the use of Boolean expression that are based on parameters
(ICS) included in annex A of the present document.
Selection criteria of tested bands / CA-Configurations for each applicable test is formally expressed using group theory
based on parameters (ICS) included in annex A of the present document.
Additional information related to the Test Case (TC), e.g. affecting its dynamic behaviour or its execution may be
provided as well
The columns in tables 4.1-1 / 4.2-1 have the following meaning:
Clause
The clause column indicates the clause number in TS 36.521-1 [1] or respectively TS 36.521-3 [2] that contains the test
body.
Title
The title column describes the name of the test and contains the clause title of the clause in TS 36.521-1 [1] or TS
36.521-3 [2] that contains the test body.
Release
The release column indicates the earliest release from which each test case is applicable. It may also indicate a range of
releases or a single release to which a test case is applicable.
Applicability - Condition
The following notations are used for the applicability column:
R recommended - the test case is recommended to all terminals supporting E-UTRA
O optional - the test case is optional
N/A not applicable - in the given context, the test case is not recommended.
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 8 ETSI TS 136 521-2 V19.1.0 (2026-04)
Ci conditional - the test is recommended ("R") or not ("N/A") depending on the support of other
items. "i" is an integer identifying an unique conditional status expression which is defined
immediately following the table. For nested conditional expressions, the syntax "IF . THEN (IF .
THEN . ELSE.) ELSE ." is used to avoid ambiguities.
Applicability - Comments
This comments column contains a verbal description of the condition included in the applicability column.
Tested Bands / CA-Configurations Selection
This column defines a set of bands / CA Configurations the test is to be run for, if the test is applicable. If the set is
empty, the test is considered as not applicable.
The following notations are used in the tested bands selection column:
Di Derive the set based on Band Selection Criteria Di defined in table 4.1-1b.
Ei Derive the set based on CA Configurations Selection Criteria Ei defined in table 4.1-1c.
TBD Band selection not defined at this time, in the meantime test all Bands / CA Configurations
Text For more complex selection criteria, or if the criteria are already specified somewhere else in the
spec, text reference to the section is given.
Branch
This column contains indication if the test case may perform differently depending on the UE capabilities.
NOTE 1: To meet the validation requirements from certification bodies then there is a need to uniquely reference
the FDD and TDD branch (i.e. different behaviour within one and the same TC) of common FDD and
TDD RF test cases in table 4.1-1. The FDD and TDD branches of common FDD and TDD test cases can
be referenced by amending a "FDD" or "TDD" suffix to the test case clause number. For example for test
case 6.2.2 the FDD and TDD branches can be identified by "6.2.2 FDD" and "6.2.2 TDD".
NOTE 2: To meet the validation requirements from certification bodies then there is a need to uniquely reference
the 2Rx (UE supports 2 Rx antenna ports in the tested band) and 4Rx (UE supports 4 Rx antenna ports in
the tested band) branch of common 2Rx and 4Rx RRM test cases in table 4.2-1. The 2Rx and 4Rx
branches of common 2Rx and 4Rx test cases can be referenced by amending a "2Rx" or "4Rx" suffix to
the test case clause number. For example for test case 4.2.1 the 2Rx and 4Rx branches can be identified
by "4.2.1_2Rx" and "4.2.1_4Rx". When the branch is “2RX, 4RX” or “xxx_2RX, xxx_4RX”,
requirements of 2RX are tested for 2RX capability UE and requirements of 4RX are tested for 4RX
capability UE.
NOTE 3: To meet the validation requirements from certification bodies then there is a need to uniquely reference
the PC3 (UE supports Power Class 3 in the tested band) and HPUE (UE supports Power Class 1 or Power
Class 2 in the tested band) branch of common PC3 and HPUE test cases in Table 4.1-1. The PC3 and
HPUE branches of common PC3 and HPUE test cases can be referenced by amending a "PC3" or
"HPUE" suffix to the test case clause number. For example for test case 6.6.2.1 the PC3 and HPUE
branches can be identified by "6.6.2.11_PC3" and "6.6.2.1_HPUE". When the branch is "PC3, HPUE" or
"xxx_PC3, xxx_HPUE", requirements of PC3 are tested for PC3 capability UE and requirements of
HPUE are tested for HPUE capability UE.
Additional Information
This column contains additional information
4.1 RF conformance test cases
NOTE: To determine applicability of a test case, FGI support in combined or fdd-Add-UE-EUTRA-Capabilities
or tdd-Add-UE-EUTRA-Capabilities is taken into account.
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 9 ETSI TS 136 521-2 V19.1.0 (2026-04)
Table 4.1-1: Applicability of RF conformance test cases, ref. TS 36.521-1 [1]
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 10 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
Transmitter Characteristics
6.2.2 UE Maximum Output Power Rel-8 C186 UE supporting E-UTRA D01 FDD, TDD Not required to be
Power Class 3 tested in Band 41
for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.2.2_1 UE Maximum Output Power for HPUE Rel-10 C39a UE supporting E-UTRA D16
Power Class 1
C39b UE supporting E-UTRA D17
Power Class 2
6.2.2A.1 UE Maximum Output Power for CA (intra- Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD Not required to be
band contiguous DL CA and UL CA) intra-band contiguous DL tested in Band 41
CA and UL CA for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.2.2A.1_3 UE Maximum Output Power for CA and Rel-10 C39b UE supporting intraband E01 TDD
HPUE (intra-band contiguous DL CA and UL contiguous CA and Power
CA) Class 2
6.2.2A.2 UE Maximum Output Power for CA (inter- Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
band DL CA and UL CA) inter-band DL CA and UL
CA
Rel-14 C305 UE supporting E-UTRA and
eLAA
6.2.2A.3 UE Maximum Output Power for CA (intra- Rel-11 C115 UE supporting E-UTRA and E02 FDD, TDD
band non-contiguous DL CA and UL CA) intra-band non-contiguous
DL CA and UL CA
6.2.2A.4 UE Maximum Output Power for CA (3UL CA) Rel-13 C19a UE supporting E-UTRA and E18 TDD
intra-band contiguous DL
CA and UL CA
C116a UE supporting E-UTRA and E18 FDD, TDD
inter-band DL CA and UL
CA
6.2.2B UE Maximum Output Power for UL-MIMO Rel-10 C07 UE supporting E-UTRA D05 FDD, TDD
Power Class 3 and UL-
MIMO
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 11 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.2.2B_1 HPUE Maximum Output Power for UL-MIMO Rel-10 C202 UE supporting E-UTRA D05 TDD
Power Class 2 and UL-
MIMO
6.2.2E UE Maximum Output Power for UE category Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
0 category 0) FDD, TDD
6.2.2EA UE Maximum Output Power for UE category Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
M1 UE category M1 FDD, TDD
6.2.2EB UE Maximum Output Power for UE category Rel-13 C112c UE supporting E-UTRA and D01
1bis UE category 1bis
6.2.2EC UE Maximum Output Power for UE category Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
M2 UE category M2 FDD, TDD
6.2.2F UE Maximum Output Power for category NB1 Rel-13 C112b UE supporting NB-IoT D11, D18 HD-FDD,
and NB2 TDD
6.2.2FA UE Maximum Output Power for category NB1 Rel-14 C325 UE supporting NB-IoT and D11, D18 HD-FDD,
and NB2/Power Class 6 Power Class 6 TDD
6.2.2G.2 UE Maximum Output Power for V2X Rel-14 C320 UE supporting E-UTRA and E16 FDD,TDD
Communication / Simultaneous E-UTRA V2X V2X Sidelink communication
sidelink and E-UTRA uplink transmission
6.2.2G.4.1 UE Maximum Output Power for V2X Rel14 C335 UE supporting V2X Sidelink D14 TDD
Communication / Power class 2 / Non- communication and Power
concurrent with E-UTRA uplink transmissions Class 2
6.2.2_s UE Maximum Output Power for subslot/slot Rel-15 C352 UE supporting E-UTRA FDD D02 FDD
TTI and Power Class 3 and
subslot/slot TTI
C352a UE supporting E-UTRA TDD D03 TDD Not required to be
and Power Class 3 and slot tested in Band 41
TTI for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.2.5 Configured UE transmitted Output Power Rel-8 C186 UE supporting E-UTRA D01 FDD, TDD Not required to be
Power Class 3 tested in Band 41
for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.2.5_s Configured UE transmitted Output Power for Rel-15 C352 UE supporting E-UTRA FDD D02 FDD
subslot/slot TTI and Power Class 3 and
subslot/slot TTI
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 12 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
C352a UE supporting E-UTRA TDD D03 TDD Not required to be
and Power Class 3 and slot tested in Band 41
TTI for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.2.5_1 Configured UE transmitted Output Power for Rel-10 C39a UE supporting E-UTRA D16
HPUE Power Class 1
C39b UE supporting E-UTRA D17
Power Class 2
6.2.5A.1 Configured UE transmitted Output Power for Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD
CA (intra-band contiguous DL CA and UL CA) intra-band contiguous DL
CA and UL CA
6.2.5A.3 Configured UE transmitted Output Power for Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
CA (inter-band DL CA and UL CA) inter-band DL CA and UL
CA
6.2.5A.4 Configured UE transmitted Output Power for Rel-11 C115 UE supporting E-UTRA and E02 FDD, TDD
CA (intra-band non-contiguous DL CA and UL intra-band non-contiguous
CA) DL CA and UL CA
6.2.5A.5 Configured UE transmitted Output Power for Rel-13 C19a UE supporting E-UTRA and E18 TDD
CA (3UL CA) intra-band contiguous DL
CA and UL CA
C116a UE supporting E-UTRA and E18 FDD, TDD
inter-band DL CA and UL
CA
6.2.5B Configured transmitted power for UL-MIMO Rel-10 C07 UE supporting E-UTRA and D05 FDD, TDD
UL_MIMO
6.2.5E Configured transmitted power for UE category Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
0 category 0) FDD, TDD
6.2.5EA Configured UE transmitted Power for UE Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
category M1 UE category M1 FDD, TDD
6.2.5EB Configured UE transmitted Power for UE Rel-13 C112c UE supporting E-UTRA and D01
category 1bis UE category 1bis
6.2.5EC Configured UE transmitted Power for UE Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
category M2 UE category M2 FDD, TDD
6.2.5F Configured UE transmitted Output Power for Rel-13 C112b UE supporting NB-IoT D12, D13, D18 HD-FDD,
category NB1 and NB2 TDD
6.2.5FA Configured UE transmitted Output Power for Rel-14 C325 UE supporting NB-IoT and D11, D18 HD-FDD,
category NB1 and NB2/Power Class 6 Power Class 6 TDD
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 13 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.2.5G.1 Configured UE transmitted Output Power for Rel-14 C313 UE supporting V2X Sidelink D14 TDD
V2X Communication / Non-concurrent with E- communication
UTRA uplink transmission
6.2.5G.2 Configured UE transmitted Output Power for Rel-14 C320 UE supporting E-UTRA and E16 FDD,TDD
V2X Communication / Simultaneous E-UTRA V2X Sidelink communication
V2X sidelink and E-UTRA uplink transmission
6.2.5G.3 Configured UE transmitted Output Power for Rel-14 C333 UE supporting V2X Sidelink E17 TDD
V2X Communication / Intra-band contiguous communication and multi-
multi-carrier operation carrier configurations
6.3.1 Void
6.3.2 Minimum Output Power Rel-8 C113 UE supporting E-UTRA D01 FDD, TDD
6.3.2A.1 Minimum Output Power for CA (intra-band Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD
contiguous DL CA and UL CA) intra-band contiguous DL
CA and UL CA
6.3.2A.2 Minimum Output Power for CA (inter-band DL Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
CA and UL CA) inter-band DL CA and UL
CA
6.3.2A.3 Minimum Output Power for CA (intra-band Rel-11 C115 UE supporting E-UTRA and E02 FDD
non-contiguous DL CA and UL CA) inter-band DL CA and UL
CA
6.3.2A.4 Minimum Output Power for CA (3UL CA) Rel-13 C19a UE supporting E-UTRA and E18 TDD
intra-band contiguous DL
CA and UL CA
C116a UE supporting E-UTRA and E18 FDD, TDD
inter-band DL CA and UL
CA
6.3.2B Minimum Output Power for UL-MIMO Rel-10 C07 UE supporting E-UTRA and D05 FDD, TDD
UL_MIMO
6.3.2E Minimum Output Power for UE category 0 Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
category 0 FDD, TDD
6.3.2EA Minimum Output Power for UE category M1 Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
UE category M1 FDD, TDD
6.3.2EB Minimum Output Power for UE category 1bis Rel-13 C112c UE supporting E-UTRA and D01
UE category 1bis
6.3.2EC Minimum Output Power for UE category M2 Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
UE category M2 FDD, TDD
6.3.2F Minimum Output Power for category NB1 and Rel-13 C112b UE supporting NB-IoT D12, D13, D18 HD-FDD,
NB2 TDD
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 14 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.3.2G.1 Minimum output power for V2X Rel-14 C313 UE supporting V2X Sidelink D14 TDD
Communication / Non-concurrent with E- communication
UTRA uplink transmissions
6.3.2G.2 Minimum output power for V2X Rel-14 C320 UE supporting E-UTRA and E16 FDD,TDD
Communication / Simultaneous E-UTRA V2X V2X Sidelink communication
sidelink and E-UTRA uplink transmissions
6.3.2G.3 Minimum output power for V2X Rel-14 C333 UE supporting V2X Sidelink E17 TDD
Communication / Intra-band contiguous multi- communication and multi-
carrier operation carrier configurations
6.3.3 Transmit OFF Power Rel-8 C113 UE supporting E-UTRA D01 FDD, TDD
6.3.3A.1 Transmit OFF Power for CA (intra-band Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD
contiguous DL CA and UL CA) intra-band contiguous DL
CA and UL CA
6.3.3A.2 UE Transmit OFF power for CA (inter-band Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
DL CA and UL CA) inter-band DL CA and UL
CA
6.3.3A.3 Transmit OFF Power for CA (intra-band non- Rel-11 C115 UE supporting E-UTRA and E02 FDD, TDD
contiguous DL CA and UL CA) intra-band non-contiguous
DL CA and UL CA
6.3.3B UE Transmit OFF power for UL-MIMO Rel-10 C07 UE supporting E-UTRA and D05 FDD, TDD
UL_MIMO
6.3.3E UE Transmit OFF power for UE category 0 Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
category 0 FDD, TDD
6.3.3EA UE Transmit OFF power for UE category M1 Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
UE category M1 FDD, TDD
6.3.3EB UE Transmit OFF power for UE category 1bis Rel-13 C112c UE supporting E-UTRA and D01
UE category 1bis
6.3.3EC UE Transmit OFF power for UE category M2 Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
UE category M2 FDD, TDD
6.3.3F Transmit OFF power for category NB1 and Rel-13 C112b UE supporting NB-IoT D12, D13, D18 HD-FDD,
NB2 TDD
6.3.3G.1 UE Transmit OFF power for V2X Rel-14 C313 UE supporting V2X Sidelink D14 TDD
Communication / Non-concurrent with E- communication
UTRA uplink transmissions
6.3.3G.2 UE Transmit OFF power for V2X Rel-14 C320 UE supporting E-UTRA and E16 FDD,TDD
Communication / Simultaneous E-UTRA V2X V2X Sidelink communication
sidelink and E-UTRA uplink transmissions
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 15 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.3.3G.3 UE Transmit OFF power for V2X Rel-14 C333 UE supporting V2X Sidelink E17 TDD
Communication / Intra-band contiguous multi- communication and multi-
carrier operation carrier configurations
6.3.4.1 General ON/OFF time mask Rel-8 C113 UE supporting E-UTRA D01 FDD, TDD
6.3.4.1_s General ON/OFF time mask for subslot/slot Rel-15 C353 UE supporting E-UTRA FDD D02 FDD
TTI and subslot/slot TTI
C353a UE supporting E-UTRA TDD D03 TDD
and slot TTI
6.3.4.2.1 PRACH time mask Rel-8 C113 UE supporting E-UTRA D01 FDD, TDD
6.3.4.2.2 SRS time mask Rel-8 C113 UE supporting E-UTRA D01 FDD, TDD
6.3.4A.1.1 General ON/OFF time mask for CA (intra- Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD
band contiguous DL CA and UL CA) intra-band contiguous DL
CA and UL CA
6.3.4A.1.2 General ON/OFF time mask for CA (inter- Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
band DL CA and UL CA) inter-band DL CA and UL
CA
6.3.4A.1.3 General ON/OFF time mask for CA (intra- Rel-11 C115 UE supporting E-UTRA and E02 FDD, TDD
band non-contiguous DL CA and UL CA) intra-band non-contiguous
DL CA and UL CA
6.3.4A.1.4 General ON/OFF time mask for CA (3UL CA) Rel-13 C19a UE supporting E-UTRA and E18 TDD
intra-band contiguous DL
CA and UL CA
C116a UE supporting E-UTRA and FDD, TDD
inter-band DL CA and UL
CA
6.3.4A.1.5 General ON/OFF time mask for CA (4UL CA) Rel-11 C334 UE supporting E-UTRA and E20 TDD
4DL CA and 4UL CA
6.3.4B.1 ON/OFF time mask for UL-MIMO Rel-10 C07 UE supporting E-UTRA and D05 FDD, TDD
UL_MIMO
6.3.4C.1 General ON/OFF time mask for Dual Rel-12 C224 UE supporting Dual E03 FDD, TDD
Connectivity Connectivity
6.3.4C.1_1 General ON/OFF time mask for asynchronous Rel-12 C225 UE supporting E03 FDD, TDD
Dual Connectivity asynchronous Dual
Connectivity
6.3.4E.1 General ON/OFF time mask for UE category Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
0 category 0 FDD, TDD
6.3.4E.2 Prach and SRC ON/OFF time mask for UE Rel-12 C112 UE supporting E-UTRA (UE D01 FDD, HD-
category 0 category 0 FDD, TDD
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 16 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.3.4EA.1 General ON/OFF time mask for UE category Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
M1 UE category M1 FDD, TDD
6.3.4EA.2.1 PRACH time mask for UE category M1 Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
UE category M1 FDD, TDD
6.3.4EA.2.2 SRS time mask for UE category M1 Rel-13 C112a UE supporting E-UTRA and D01 FDD, HD-
UE category M1 FDD, TDD
6.3.4EB.1 General ON/OFF time mask for UE category Rel-13 C112c UE supporting E-UTRA and D01
1bis UE category 1bis
6.3.4EB.2.1 PRACH time mask for UE category 1bis Rel13 C112c UE supporting E-UTRA and D01
UE category 1bis
6.3.4EB.2.2 SRS time mask for UE category 1bis Rel13 C112c UE supporting E-UTRA and
UE category 1bis
6.3.4EC.1 General ON/OFF time mask for UE category Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
M2 UE category M2 FDD, TDD
6.3.4EC.2.1 PRACH time mask for UE category M2 Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
UE category M2 FDD, TDD
6.3.4EC.2.2 SRS time mask for UE category M2 Rel-14 C112d UE supporting E-UTRA and D01 FDD, HD-
UE category M2 FDD, TDD
6.3.4F.1 General ON/OFF time mask for category NB1 Rel-13 C112b UE supporting NB-IoT D12, D13, D18 HD-FDD,
and NB2 TDD
6.3.4F.2 NPRACH time mask for category NB1 and Rel-13 C112b UE supporting NB-IoT D12, D13, D18 HD-FDD,
NB2 TDD
6.3.4G.1 General ON/OFF time mask for V2X Rel-14 C313 UE supporting V2X Sidelink D14 TDD
Communication / Non-concurrent with E- communication
UTRA uplink transmissions
6.3.4G.2 General ON/OFF time mask for V2X Rel-14 C320 UE supporting E-UTRA and E16 FDD,TDD
Communication / Simultaneous E-UTRA V2X V2X Sidelink communication
sidelink and E-UTRA uplink transmissions
6.3.4G.3 General ON/OFF time mask for V2X Rel-14 C333 UE supporting V2X Sidelink E17 TDD
Communication / Intra-band contiguous multi- communication and multi-
carrier operation carrier configurations
6.3.4G.4 PSSS/SSSS time mask for V2X Rel-14 C313 UE supporting V2X Sidelink D14 TDD
Communication / Non-concurrent with E- communication
UTRA uplink transmissions
ETSI
3GPP TS 36.521-2 version 19.1.0 Release 19 17 ETSI TS 136 521-2 V19.1.0 (2026-04)
Clause Title Release Applicability Tested Bands / Branch Additional
CA- Information
Configurations
Selection
Condition Comments
6.3.5.1 Power Control Absolute Power Tolerance Rel-8 C186 UE supporting E-UTRA D01 FDD, TDD Not required to be
Power Class 3 tested in Band 41
for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.3.5.2 Power Control Relative Power Tolerance Rel-8 C186 UE supporting E-UTRA D01 FDD, TDD Not required to be
Power Class 3 tested in Band 41
for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.3.5.3 Aggregate Power Control Tolerance Rel-8 C186 UE supporting E-UTRA D01 FDD, TDD Not required to be
Power Class 3 tested in Band 41
for Power Class 2
UE nor in Band
14 for Power
Class 1 UE
6.3.5A.1.1 Power Control Absolute Power Tolerance for Rel-10 C19 UE supporting E-UTRA and E01 FDD, TDD
CA (intra-band contiguous DL CA and UL CA) intra-band contiguous DL
CA and UL CA
6.3.5A.1.2 Power Control Absolute Power Tolerance for Rel-11 C116 UE supporting E-UTRA and E03 FDD, TDD
CA (inter-band DL CA and UL CA) inter-band DL CA and UL
CA
Rel-14 C305 UE supporting E-UTRA and
eLAA
6.3.5A.1.3 Power Control Absolute Power Tolerance for Rel-11 C115 UE supporting E-UTRA and E02 FDD, TDD
CA (intra-band non-contiguous DL CA and UL intra-band non-contiguous
CA) DL CA and UL CA
6.3.5A.1.4 Power Control Absolute power tolerance for Rel-13 C19a UE supporting E-UTRA and E18 TDD
CA (3UL CA) intra-band contiguous DL
CA and UL CA
6.3.5A.1.6 Power control absolute power tolerance for Rel-11 C334 UE supporting E-UTRA and E20 FDD, TDD
CA (4UL CA) intra-band contiguous 4DL
CA and 4UL CA
C336 UE supporting E-UTRA and
inter-band 4DL CA and 4UL
CA
ETSI
3GPP TS 36.521-2 version 19.1.0 Rel
...