SIST-TS ETSI/TS 102 110-2 V1.1.1:2005

SLOVENSKI STANDARD
SIST-TS ETSI/TS 102 110-2 V1.1.1:2005
01-januar-2005
Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije
omrežja univerzalnega mobilnega telekomunikacijskega sistema (UMTS) z
globalnim sistemom mobilnih komunikacij (GSM), faza 2+, ter javnega
komutiranega telefonskega omrežja (PSTN) z digitalnim omrežjem z integriranimi
storitvami (ISDN) – 2. del: Abstraktni preskušalni niz (ATS) in delna dodatna
informacija za preskušanje izvedbe protokola (PIXIT) – Proforma

Services and Protocols for Advanced Networks (SPAN); Network integration testing of

Integrated Services Digital Network (ISDN) Part 2: Abstract Test Suite (ATS) and Partial

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

The present document may be made available in more than one electronic version or in print. In any case of existing or

perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.

TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.

3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.

Intellectual Property Rights................................................................................................................................5

Foreword.............................................................................................................................................................5

Introduction ........................................................................................................................................................5

1 Scope........................................................................................................................................................6

2 References................................................................................................................................................6

3 Definitions and abbreviations...................................................................................................................9

3.1 Definitions..........................................................................................................................................................9

3.2 Definitions related to test purpose descriptions..................................................................................................9

3.3 Abbreviations...................................................................................................................................................12

4 Conformance to this ICS and IXIT proformas specification..................................................................13

Annex A (normative): End-to-end ICS proforma.............................................................................14

A.1 Guidance for completing the ICS proforma ...........................................................................................14

A.1.1 Purposes and structure......................................................................................................................................14

A.1.2 Abbreviations and conventions ........................................................................................................................14

A.1.3 Instructions for completing the ICS proforma..................................................................................................16

A.2 Identification of the implementation ......................................................................................................16

A.2.1 Date of the statement........................................................................................................................................16

A.2.2 Implementation Under Test (IUT) identification .............................................................................................16

A.2.3 ICS contact person............................................................................................................................................17

A.3 Identification of the document ...............................................................................................................17

A.4 ISDN - UMTS Interworking ..................................................................................................................17

A.4.1 Basic call..........................................................................................................................................................17

A.4.2 Supplementary services....................................................................................................................................20

A.4.2.1 Non-symmetrical tests................................................................................................................................26

A.5 Interworking PSTN-UMTS....................................................................................................................26

A.5.1 Basic call..........................................................................................................................................................26

A.5.2 Interworking PSTN-UMTS -Supplementary services......................................................................................26

A.5.2.1 Non-symmetrical tests................................................................................................................................28

A.6 UMTS-ISDN Interworking....................................................................................................................29

A.6.1 Basic call..........................................................................................................................................................29

A.6.2 UMTS-ISDN Interworking - Supplementary services .....................................................................................32

A.6.2.1 Non-symmetrical tests................................................................................................................................35

A.7 UMTS-PSTN Interworking....................................................................................................................36

A.7.1 Basic call ..........................................................................................................................................................36

A.7.2 UMTS-PSTN Interworking - Supplementary services.....................................................................................36

A.7.2.1 Non-symmetrical tests................................................................................................................................38

A.8 GSM-UMTS Interworking.....................................................................................................................38

A.8.1 Basic call..........................................................................................................................................................38

A.8.2 GSM-UMTS Interworking - Supplementary services......................................................................................41

A.9 UMTS-GSM Interworking.....................................................................................................................47

A.9.1 Basic call..........................................................................................................................................................47

A.9.2 UMTS-GSM Interworking - Supplementary services......................................................................................50

A.10 UMTS-UMTS Interworking...................................................................................................................56

A.10.1 Basic call..........................................................................................................................................................56

A.10.2 UMTS-UMTS Interworking - Supplementary services....................................................................................59

Annex B (normative): Partial End-to-end PIXIT proforma............................................................66

B.1 Instructions for completing the PIXIT proforma....................................................................................66

B.2 Identification summary...........................................................................................................................66

B.3 Abstract test suite summary ...................................................................................................................66

B.4 Test campaign report..............................................................................................................................73

Annex C (normative): Abstract Test Suite (ATS) .............................................................................98

C.1 The TTCN Graphical form (TTCN.GR) ................................................................................................98

C.2 The TTCN Machine Processable form (TTCN.MP)..............................................................................98

Annex D (informative): Bibliography...................................................................................................99

History ............................................................................................................................................................105

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

All published ETSI deliverables shall include information which directs the reader to the above source of information.

This Technical Specification (TS) has been produced by ETSI Technical Committee Services and Protocols for

The present document was developed by EURESCOM P1106 as Deliverable 3 Volume 2 Parts 1 and 2, and made freely

The present document is part 2 of a multi-part deliverable covering Network integration testing of Universal Mobile

Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public

Switched Telephone Network (PSTN) and Integrated Services Digital Network (ISDN), as identified below:

Part 2: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing

The present document contains the Implementation Conformance Statement (ICS) and Implementation eXtra

Information for Testing (IXIT) for Network Integration Testing for the European ISDN and PLMN, covering Network

Integration Testing (NIT) between ISDN-UMTS, PSTN-UMTS, UMTS-ISDN, UMTS-PSTN and UMTS-UMTS

networks. The objective is to verify the level of international or national end-to-end support of ISDN and UMTS

services. Both bearer services (and associated teleservices) and supplementary services are checked for interworking

The European ISDN, PSTN and PLMN (GSM, UMTS) are made up by connecting the different national networks and

End-to-end NIT covers all the testing activities necessary to assess the correct behaviour of the interconnected network

The present document specifies the Implementation Conformance Statement (ICS) and Implementation eXtra

Information for Testing (IXIT) for Network Integration Testing for Network Integration Testing (NIT) to verify the

overall compatibility of UMTS, GSM, ISDN and non-ISDN (PSTN) over the national or international ISUP between

networks. Network Integration Testing will assure that the appropriate requested features passes between an ISDN

subscriber and the mobile subscriber across the national or international ISUP (ISUP V2) interface.

The following documents contain provisions which, through reference in this text, constitute provisions of the present

• References are either specific (identified by date of publication and/or edition number or version number) or

Referenced documents which are not found to be publicly available in the expected location might be found at

[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling

System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;

[2] ETSI ETS 300 083: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer

service category usable for speech information transfer; Terminal requirements for end-to-end

[3] ETSI ETS 300 084: "Integrated Services Digital Network (ISDN); Circuit mode structured bearer

service category usable for 3,1 kHz audio information transfer; Terminal requirements necessary

[4] ETSI EN 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz,

videotelephony, audiographic conference and videoconference teleservices; Digital Subscriber

[5] ETSI ETS 300 080: "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for

[6] ETSI ETS 300 103: "Integrated Services Digital Network (ISDN); Support of CCITT

Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an

[7] ETSI EN 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification

Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)

[8] ETSI EN 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification

Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)

[9] ETSI EN 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification

Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one

[10] ETSI EN 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification

Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)

[11] ETSI EN 300 138-1: "Integrated Services Digital Network (ISDN); Closed User Group (CUG)

supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[12] ETSI EN 300 055-1: "Integrated Services Digital Network (ISDN); Terminal Portability (TP)

supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[13] ETSI EN 300 286-1: "Integrated Services Digital Network (ISDN); User-to-User Signalling

(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[14] ETSI EN 300 207-1: "Integrated Services Digital Network (ISDN); Diversion supplementary

services; Digital Subscriber Signalling System No. One (DSS1); Part 1: Protocol specification".

[15] ETSI EN 300 141-1: "Integrated Services Digital Network (ISDN); Call Hold (HOLD)

supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[16] ETSI EN 300 058-1: "Integrated Services Digital Network (ISDN); Call Waiting (CW)

supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[17] ETSI EN 300 369-1: "Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT)

supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;

[18] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for

the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)

[19] ETSI EN 300 289: "Access and Terminals (AT); 64 kbit/s digital unrestricted leased line with

[20] ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testing

[21] ISO/IEC 9646-2: "Information technology; Open Systems Interconnection; Conformance testing

[22] ISO/IEC 9646-3: "Information technology; Open Systems Interconnection; Conformance testing

methodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)".

[23] ETSI EN 300 940: "Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio

[24] ETSI EN 300 951: "Digital cellular telecommunications system (Phase 2+) (GSM); Line

[25] ETSI EN 300 952: "Digital cellular telecommunications system (Phase 2+) (GSM); Call

[26] ETSI EN 300 953: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting

(CW) and Call Hold (HOLD) supplementary services; Stage 3 (GSM 04.83 Release 1998)".

[27] ETSI TS 100 569: "Digital cellular telecommunications system (Phase 2+) (GSM); Closed User

[28] ETSI TS 100 956: "Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring

[29] ETSI TS 124 008 (V3.2.1): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Mobile radio interface layer 3

specification, Core Network protocols - Stage 3 (3G TS 24.008 version 3.2.1 Release 1999)".

[30] ETSI TS 124 011 (V3.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Point-to-Point (PP) Short Message

Service (SMS) support on mobile radio interface (3G TS 24.011 version 3.1.0 Release 1999)".

[31] ETSI TS 124 081 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Line identification supplementary

[32] ETSI TS 124 082 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Call Forwarding (CF) supplementary

[33] ETSI TS 124 083 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Hold

(HOLD) supplementary services - Stage 3 (3G TS 24.083 version 3.0.0 Release 1999)".

[34] ETSI TS 124 084 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Multi Party (MPTY) supplementary

[35] ETSI TS 124 085 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

[36] ETSI TS 124 087 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

[37] ETSI TS 124 088 (V3.0.0): "Digital cellular telecommunications system (Phase 2+) (GSM);

Universal Mobile Telecommunications System (UMTS); Call Barring (CB) Supplementary

[38] ETSI EN 300 001: "Attachments to the Public Switched Telephone Network (PSTN); General

technical requirements for equipment connected to an analogue subscriber interface in the PSTN".

[39] ETSI ETS 300 648: "Public Switched Telephone Network (PSTN); Calling Line Identification

[40] ETSI ETS 300 559: "Digital cellular telecommunications system (Phase 2) (GSM); Point-to-Point

[41] ETSI EN 300 954: "Digital cellular telecommunications system (Phase 2+) (GSM); Multi Party

[42] ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testing

[43] ITU-T Recommendation G.711: "Pulse code modulation (PCM) of voice frequencies".

[44] ITU-T Recommendation H.221: "Frame structure for a 64 to 1920 kbit/s channel in audiovisual

[45] ITU-T Recommendation H.242: "System for establishing communication between audiovisual

[46] ITU-T Recommendation V.110: "Support by an ISDN of data terminal equipments with V-Series

[47] ITU-T Recommendation X.30: "Support of X.21, X.21 bis and X.20 bis based Data Terminal

[49] ISO/IEC 7776: "Information technology - Telecommunications and information exchange between

systems - High-level data link control procedures - Description of the X.25 LAPB-compatible

[50] ISO/IEC 8208: "Information technology - Data communications - X.25 Packet Layer Protocol for

For the purposes of the present document, the following terms and definitions apply:

Implementation Conformance Statement (ICS) proforma: Refer to ISO/IEC 9646-1 [20].

Implementation eXtra Information for Testing (IXIT) proforma: Refer to ISO/IEC 9646-1 [20].

Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [20].

Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [20].

Alternate speech and facsimile group 3 (TS 61): teleservice which allows the connection of ITUgroup 3 fax apparatus

NOTE: Facsimile connections may be established to/from group 3 apparatus in the PSTN, ISDN or GSM PLMN.

Alternate Speech/Data: which provides the capability to swap between speech and data during a call

NOTE: If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used

for the duration of the call. The access interface at the mobile station for the data portion is assumed to be

a standard data interface. Some means must be provided to select the speech/data capability.

Automatic Facs. group 3 (TS 62): teleservice which allows connection of ITUgroup 3 fax apparatus to and from the

NOTE: Facsimile connections may be established to and from group 3 apparatus in the PSTN, ISDN or GSM

BC=3,1 kHz audio: Bearer Capability information element with its information transfer capability field set to "3,1 kHz

BC=speech: Bearer Capability information element with its information transfer capability field set to "speech" and its

BC=UDI : Bearer Capability information element with its information transfer capability set to "unrestricted digital

BC=UDI/TA: Bearer Capability information element with its information transfer capability set to "unrestricted digital

information with tones/announcements" and its user information layer one protocol field set to

BC=V110/X30: Bearer Capability information element with its information transfer capability set to "unrestricted

digital information" and its user information layer 1 field set to "ITUstandardised rate adaption V.110/X.30", including

CF active: Call Forwarding (U, B or NR) supplementary service already activated with the addre