SIST EN 302 017 V2.1.1:2017

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.X]LMVNR(8Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU33.170Televizijska in radijska difuzijaTelevision and radio broadcasting33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 302 017 V2.1.1 (2017-04)SIST EN 302 017 V2.1.1:2017en01-junij-2017SIST EN 302 017 V2.1.1:2017SLOVENSKI

ETSI EN 302 017 V2.1.1 (2017-04) Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

Reference REN/ERM-TG17-14 Keywords AM, audio, broadcasting, harmonised standard, radio, regulation, terrestrial, transmitter ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 017 V2.1.1:2017

ETSI ETSI EN 302 017 V2.1.1 (2017-04) 3Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Modal verbs terminology .................................................................................................................................... 5 Introduction ........................................................................................................................................................ 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 6 2.2 Informative references ........................................................................................................................................ 6 3 Definitions, symbols and abbreviations ................................................................................................... 7 3.1 Definitions .......................................................................................................................................................... 7 3.2 Symbols .............................................................................................................................................................. 8 3.3 Abbreviations ..................................................................................................................................................... 8 4 Technical requirements specifications ..................................................................................................... 8 4.1 Environmental profile ......................................................................................................................................... 8 4.2 Conformance requirements ................................................................................................................................ 8 4.2.1 Rated output power ....................................................................................................................................... 8 4.2.1.1 Definition ................................................................................................................................................ 8 4.2.1.2 Limit ........................................................................................................................................................ 8 4.2.1.3 Conformance ........................................................................................................................................... 8 4.2.2 Frequency drift .............................................................................................................................................. 8 4.2.2.1 Definition ................................................................................................................................................ 8 4.2.2.2 Limit ........................................................................................................................................................ 9 4.2.2.3 Conformance ........................................................................................................................................... 9 4.2.3 Spurious emissions ....................................................................................................................................... 9 4.2.3.1 Definition ................................................................................................................................................ 9 4.2.3.2 Limit ........................................................................................................................................................ 9 4.2.3.3 Conformance ......................................................................................................................................... 10 4.2.4 Transmitter muting during frequency shift ................................................................................................. 10 4.2.4.1 Definition .............................................................................................................................................. 10 4.2.4.2 Limits .................................................................................................................................................... 10 4.2.4.3 Conformance ......................................................................................................................................... 10 4.2.5 Out-of-band emissions ................................................................................................................................ 10 4.2.5.1 Definition .............................................................................................................................................. 10 4.2.5.2 Limit ...................................................................................................................................................... 10 4.2.5.3 Conformance ......................................................................................................................................... 12 5 Testing for compliance with technical requirements .............................................................................. 12 5.1 Environmental conditions for testing ............................................................................................................... 12 5.2 Interpretation of the measurement results ........................................................................................................ 12 5.3 Methods of measurement ................................................................................................................................. 13 5.3.1 Rated output power ..................................................................................................................................... 13 5.3.1.1 Initial conditions ................................................................................................................................... 13 5.3.1.2 Procedure .............................................................................................................................................. 13 5.3.1.3 Test requirements .................................................................................................................................. 13 5.3.2 Frequency drift ............................................................................................................................................ 14 5.3.2.1 Initial conditions ................................................................................................................................... 14 5.3.2.2 Procedure .............................................................................................................................................. 14 5.3.2.3 Test requirements .................................................................................................................................. 14 5.3.3 Spurious emissions ..................................................................................................................................... 14 5.3.3.1 Initial conditions ................................................................................................................................... 14 5.3.3.2 Procedure .............................................................................................................................................. 14 5.3.3.3 Test requirements .................................................................................................................................. 15 5.3.4 Transmitter muting during frequency shift ................................................................................................. 15 5.3.4.1 Initial conditions ................................................................................................................................... 15 SIST EN 302 017 V2.1.1:2017

ETSI ETSI EN 302 017 V2.1.1 (2017-04) 45.3.4.2 Procedure .............................................................................................................................................. 15 5.3.4.3 Test requirements .................................................................................................................................. 15 5.3.5 Out-of-band emissions ................................................................................................................................ 15 5.3.5.1 Initial conditions ................................................................................................................................... 15 5.3.5.2 Procedure .............................................................................................................................................. 16 5.3.5.3 Test requirements .................................................................................................................................. 16 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU ......................................................... 17 Annex B (normative): General measuring arrangements ................................................................ 18 B.1 Testing arrangements for antenna port measurements ........................................................................... 18 B.2 Test frequency range .............................................................................................................................. 18 B.3 Test modulating signal ........................................................................................................................... 19 B.4 Test load characteristics ......................................................................................................................... 20 Annex C (informative): Change History .............................................................................................. 21 History .............................................................................................................................................................. 22

ETSI ETSI EN 302 017 V2.1.1 (2017-04) 5Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.

National transposition dates Date of adoption of this EN: 27 March 2017 Date of latest announcement of this EN (doa): 30 June 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 December 2017 Date of withdrawal of any conflicting National Standard (dow): 31 December 2018

Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document describes the requirements for the design and operation of an AM sound broadcasting service transmitter to meet the essential requirements of article 3.2 of Directive 2014/53/EU [i.1]. SIST EN 302 017 V2.1.1:2017

ETSI ETSI EN 302 017 V2.1.1 (2017-04) 61 Scope The present document specifies technical characteristics and methods of measurements for transmitter equipment for broadcast sound services using the Double Side Band amplitude modulated sound broadcasting service operating in the LF, MF and HF bands. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.2] ETSI TR 100 028-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1". [i.3] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2". [i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. SIST EN 302 017 V2.1.1:2017

ETSI ETSI EN 302 017 V2.1.1 (2017-04) 73 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU [i.1] and the following apply: antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial cable broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the general public NOTE: This service may include sound transmissions, television transmissions or other types of transmission. carrier power: average power supplied to the antenna transmission line by a transmitter during one cycle taken under the condition of no modulation channel bandwidth: frequency band of defined width (as a multiple of the carrier grid) including safety margin for operation on adjacent channels, located symmetrically around a carrier frequency in the carrier grid class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal characteristics dBc: decibels relative to the unmodulated carrier power of the emission NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the mean power P. enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port. harmonic: component of order greater than 1 of the Fourier series of a periodic quantity harmoni