33.060.20 - Receiving and transmitting equipment

The present document specifies technical characteristics and methods of measurements for radio transmitters and
receivers used in the Euroloop communications system. The system is used in railway systems.
The present document applies to the following equipment:
1) The On-Board Equipment (OBE) transmitting the tele-powering to wake-up the Trackside Equipment and
receiving the Euroloop signal. The OBE comprises a receiver fitted with a dedicated antenna.
2) The Trackside Equipment receiving t...view more

IEC 62801:2020 specifies a measurement method of half-wavelength voltage applicable to Mach-Zehnder optical modulators in wireless communication and broadcasting systems. In addition, this method is also effective for the estimation of the intermodulation distortion of Mach-Zehnder optical modulators. The method applies for the following:
– frequency range: 10 MHz to 30 GHz;
– wavelength band: 0,8 µm to 2,0 µm;
– electro-optic material based Mach-Zehnder optical modulators and their modules.

IEC TR 63099-2:2020 provides information about the current and latest applications for electric-field measurement that use radio-over-fibre technologies. System configurations, specifications, and measurement examples of each electric-field measurement system are included. The theoretical background of electric-field measurement and calibration method of electric-field sensors are beyond the scope of this document.

The present document states the minimum requirements for general communication for shipborne fixed installations using
DSC - class D.
Class D DSC is intended be used in the Very High Frequency (VHF) band of the Maritime Mobile Service (MMS), for
distress, urgency and safety communication and general communications using telephony for subsequent
communications.
The present document is part 3 of a multi-part deliverable that covers the requirements to be fulfilled by equipment that
is either...view more

The present document states the minimum requirements for equipment to be used for generation, transmission and
reception of Class A Digital Selective Calling (DSC) for use on board ships.
DSC is intended to be used in the Medium Frequency (MF), High Frequency (HF) and Very High Frequency (VHF)
bands of the Maritime Mobile Service (MMS), for both distress, safety and general communications.
The present document is part 2 of a multi-part deliverable that covers the requirements to be fulfilled...view more

The present document states the minimum requirements for general communication for handheld VHF radios using the
handheld class H DSC for shipborne use.
Class H DSC may be used in the Very High Frequency (VHF) Maritime Mobile Service (MMS), for distress, urgency
and safety communication and general communications using telephony for subsequent communications.
The present document is part 5 of a multi-part deliverable that covers the requirements to be fulfilled by equipment that
is integrat...view more

The present document states the minimum requirements for devices using Digital Selective Calling (DSC) Class M, for
Man Overboard (MOB). The present document defines the requirements for equipment that uses DSC alerting and
signalling in the maritime mobile bands and particularly the GMDSS distress and safety channels. Such equipment is
not intended to provide any subsequent communications or telephony facilities.
The present document is part 6 of a multi-part deliverable that covers the cha...view more

IEC 61968-1:2020 is the first in a series that, taken as a whole, defines interfaces for the major elements of an interface architecture for power system management and associated information exchange.
This document identifies and establishes recommendations for standard interfaces based on an Interface Reference Model (IRM). Subsequent clauses of this document are based on each interface identified in the IRM. This set of standards is limited to the definition of interfaces. They provide for i...view more

The present document specifies the test signal configuration and the limits for sensitivity, selectivity and blocking for
devices that receive AM broadcast sound services.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

The present document specifies the test signal configuration and the limits for sensitivity, selectivity and blocking for
devices that receive DRM broadcast sound services.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

The present document states the minimum requirements for equipment to be used for generation, transmission and
reception of Digital Selective Calling (DSC) for use on board ships.
DSC is intended to be used in the Medium Frequency (MF), High Frequency (HF) and Very High Frequency (VHF)
bands of the Maritime Mobile Service (MMS), for distress, urgency and safety communication and general
communications.
The present document is part 1 of a multi-part deliverable that covers the requirements t...view more

IEC 62209-3: 2019 specifies measurement protocols and test procedures for the reproducible measurement of peak spatial-average specific absorption rate (psSAR) induced inside a simplified model of a human head or body by radio-frequency (RF) transmitting devices, with a specified measurement uncertainty. Requirements are provided for psSAR assessment using vector measurement-based systems. Such systems determine the psSAR by three-dimensional (3D) field reconstruction within the volume of intere...view more

The present document specifies generic requirements and methods of measurements for devices, including the supplied
antenna, that receive broadcast sound services, whether analogue or digital modulation is used to meet the essential
requirements of article 3.2 of Directive 2014/53/EU [i.1]. Subsequent parts of this multi-part deliverable provide the
necessary test signal configurations and limits for the different broadcast sound services. Multi-function devices may
also fall under the requi...view more

The present document specifies technical characteristics and methods of measurement for Analogue and Digital Fixed
Radio Links operating as fixed Point-to-Point, and Point-to-Multipoint systems as defined in annex B, including the
associated ancillary equipment.
NOTE: Technical specifications related to the antenna port of the radio equipment are not included in the present
document. Such technical specifications are found in the relevant product standards for the effective use
of the radio...view more

The present document, together with ETSI EN 301 489-1 [1], specifies technical characteristics and methods of
measurements for radio paging equipment (receivers, transmitters and combined equipment) and associated ancillary
equipment.
NOTE 1: Examples of paging equipment are given in annex B.
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
Technical specifications related to the antenna ports...view more

The present document together with ETSI EN 301 489-1 [1] covers the assessment of all radio transceivers associated
with inductive Ultra Low Power Active Medical Implant (ULP-AMI) transmitters and receivers operating in the range
from 9 kHz to 315 kHz and any associated external radio apparatus (ULP-AMI-Ps) transmitting in the frequency range
of 9 kHz to 315 kHz including external programmers and patient related telecommunication devices in respect of
ElectroMagnetic Compatibility (EMC). Non...view more

The present document, together with ETSI EN 301 489-1 [1], specifies technical characteristics and methods of
measurements for radio devices based on UWB technology in respect of ElectroMagnetic Compatibility (EMC).
The present document applies to fixed, mobile or portable UWB devices, e.g.:
• stand alone radio equipment with or without its own control provisions;
• plug-in radio devices intended for use with, or within, a variety of host systems, e.g. personal computers,
hand-held terminal...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of commercially available amateur
radio equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of commercially available
amateur radio equipment are not included in the present document. Such technical specifications are found in the
relevant product standard ETSI EN 301 783 [i.2]...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Short Range Devices (SRD) and
ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Short Range Devices (SRD) and the associated ancillary equipment.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and...view more