The present document specifies technical characteristics and methods of measurements for Point-to-point (P-P) Digital
Fixed Radio Systems (DFRS) operating in frequency bands allocated to Fixed Service (FS) from 1 GHz to 86 GHz,
corresponding to the appropriate frequency bands from 1,4 GHz to 86 GHz as described in annex B to annex J.
Systems in the scope of the present document are generally intended to operate in full frequency division duplex (FDD)
and covers also unidirectional applications. Time division duplex (TDD) applications, when possibly applicable in a
specific band, are explicitly mentioned as appropriate in annex B through annex J.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.

Fiksni radijski sistemi - Karakteristike in zahteve za opremo in antene tipa točka-točka - 2. del: Digitalni sistemi, ki delujejo v frekvenčnih pasovih od 1,3 GHz do 86 GHz - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU

Ta dokument določa tehnične karakteristike in merilne metode za digitalne fiksne radijske sisteme (DFRS) tipa točka-točka (P-P), ki delujejo v frekvenčnih pasovih, dodeljenih fiksnim storitvam (FS) v območju od 1 GHz do 86 GHz,
ki ustreza ustreznim frekvenčnim pasom od 1,4 GHz do 86 GHz, kot je opisano v dodatkih od B do J.
Sistemi, ki jih zajema področje uporabe tega dokumenta, so na splošno namenjeni delovanju v polnem frekvenčnem dupleksu (FDD) in zajemajo tudi enosmerne načine uporabe. Načini uporabe v časovnem dupleksu (TDD), kadar se po možnosti uporabljajo v določenem pasu, so posebej omenjeni v dodatkih od B do J.
Ta dokument zajema bistvene zahteve člena 3.2 direktive 2014/53/EU [i.1] pod pogoji iz dodatka A.

General Information

Status
Published
Public Enquiry End Date
14-Sep-2016
Publication Date
06-Jun-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-May-2017
Due Date
03-Aug-2017
Completion Date
07-Jun-2017
Mandate

Buy Standard

Standard
SIST EN 302 217-2 V3.1.1:2017
English language
143 pages
sale - 10%
Preview
sale - 10%
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.(8Fixed Radio Systems - Characteristics and requirements for point-to-point equipment and antennas - Part 2: Digital systems operating in frequency bands from 1,3 GHz to 86 GHz - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU33.120.40AnteneAerials33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:ETSI EN 302 217-2 V3.1.1 (2017-05)SIST EN 302 217-2 V3.1.1:2017en01-julij-2017SIST EN 302 217-2 V3.1.1:2017SLOVENSKI

STANDARD
SIST EN 302 217-2 V3.1.1:2017

ETSI EN 302 217-2 V3.1.1 (2017-05) Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

HARMONISED EUROPEAN STANDARD SIST EN 302 217-2 V3.1.1:2017
ETSI ETSI EN 302 217-2 V3.1.1 (2017-05) 2

Reference REN/ATTM-0431 Keywords antenna, DFRS, digital, DRRS, FWA, point-to-point, radio, regulation, transmission ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 217-2 V3.1.1:2017

ETSI ETSI EN 302 217-2 V3.1.1 (2017-05) 3 Contents Intellectual Property Rights ................................................................................................................................ 9 Foreword ............................................................................................................................................................. 9 Modal verbs terminology .................................................................................................................................... 9 Introduction ........................................................................................................................................................ 9 1 Scope ...................................................................................................................................................... 10 2 References .............................................................................................................................................. 10 2.1 Normative references ....................................................................................................................................... 10 2.2 Informative references ...................................................................................................................................... 10 3 Definitions, symbols and abbreviations ................................................................................................. 14 3.1 Definitions ........................................................................................................................................................ 14 3.2 Symbols ............................................................................................................................................................ 14 3.3 Abbreviations ................................................................................................................................................... 14 4 Technical requirements specifications ................................................................................................... 14 4.1 General requirements ....................................................................................................................................... 14 4.1.1 Requirements framework ............................................................................................................................ 14 4.1.1.1 Introduction and equipment flexibility .................................................................................................. 14 4.1.1.2 Operating frequency bands.................................................................................................................... 15 4.1.1.3 Spectral efficiency classes ..................................................................................................................... 16 4.1.1.4 System alternatives................................................................................................................................ 16 4.1.1.5 Channel arrangements and utilization ................................................................................................... 17 4.1.1.6 Specific Requirements for frequency bands .......................................................................................... 17 4.1.2 Minimum RIC density ................................................................................................................................ 19 4.1.3 Payload flexibility ....................................................................................................................................... 19 4.1.4 System identification and traffic loading .................................................................................................... 20 4.1.5 Environmental profile ................................................................................................................................. 21 4.2 Transmitter requirements ................................................................................................................................. 21 4.2.0 General: system loading .............................................................................................................................. 21 4.2.1 Transmitter power and power tolerance ...................................................................................................... 22 4.2.1.1 Maximum power and EIRP ................................................................................................................... 22 4.2.1.2 Combined TX power output and EIRP limits ....................................................................................... 22 4.2.1.3 Output power tolerance ......................................................................................................................... 22 4.2.2 Transmitter power and frequency control ................................................................................................... 23 4.2.2.1 Power Control (ATPC and RTPC) ........................................................................................................ 23 4.2.2.1.0 General background ......................................................................................................................... 23 4.2.2.1.1 Automatic Transmit Power Control (ATPC) ................................................................................... 23 4.2.2.1.2 Remote Transmit Power Control (RTPC) ....................................................................................... 23 4.2.2.2 Remote Frequency Control (RFC) ........................................................................................................ 23 4.2.3 Radio Frequency (RF) spectrum mask........................................................................................................ 23 4.2.3.1 Limits background ................................................................................................................................ 23 4.2.3.2 Limits .................................................................................................................................................... 26 4.2.4 Discrete CW components exceeding the spectrum mask limit ................................................................... 39 4.2.4.1 Discrete CW components at the symbol rate ........................................................................................ 39 4.2.4.2 Other discrete CW components exceeding the spectrum mask limit .................................................... 39 4.2.5 Unwanted emissions in the spurious domain - external .............................................................................. 40 4.2.6 Dynamic Change of Modulation Order ...................................................................................................... 41 4.2.7 Radio frequency tolerance .......................................................................................................................... 41 4.2.8 Emission limitations outside the allocated band ......................................................................................... 42 4.3 Receiver requirements ...................................................................................................................................... 42 4.3.0 General: System loading ............................................................................................................................. 42 4.3.1 Unwanted emissions in the spurious domain - external .............................................................................. 42 4.3.2 BER as a function of receiver input signal level RSL ................................................................................ 42 4.3.3 Receiver selectivity ..................................................................................................................................... 43 4.3.3.1 Introduction ........................................................................................................................................... 43 4.3.3.2 Co-channel "external", first and second adjacent channel interference sensitivity ............................... 43 SIST EN 302 217-2 V3.1.1:2017

ETSI ETSI EN 302 217-2 V3.1.1 (2017-05) 4 4.3.3.2.1 Requirements basics ........................................................................................................................ 43 4.3.3.2.2 Limits for co-channel and first adjacent channel ............................................................................. 44 4.3.3.2.3 Limits for second adjacent channel interference ............................................................................. 44 4.3.3.3 CW spurious interference (blocking & spurious response rejection) .................................................... 45 4.4 Antenna Characteristics .................................................................................................................................... 46 4.4.1 Integral antennas or dedicated antennas...................................................................................................... 46 4.4.1.1 Introduction ........................................................................................................................................... 46 4.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) ............................................................................ 46 4.4.1.3 Antenna gain ......................................................................................................................................... 46 4.4.1.4 Antenna Cross-Polar Discrimination (XPD) ......................................................................................... 46 4.4.2 Guidelines for stand-alone antennas ........................................................................................................... 46 5 Testing for compliance with technical requirements .............................................................................. 47 5.1 Environmental and other conditions for testing ................................................................................................ 47 5.1.1 Environmental conditions ........................................................................................................................... 47 5.1.2 Test interpretation and measurement uncertainty ....................................................................................... 47 5.1.3 Other basic conditions ................................................................................................................................ 47 5.2 Test methods for the transmitter ....................................................................................................................... 48 5.2.0 General test summary ................................................................................................................................. 48 5.2.1 Transmitter power and power tolerance ...................................................................................................... 50 5.2.1.1 Transmitter power and EIRP ................................................................................................................. 50 5.2.1.2 Combined TX power output and EIRP limits ....................................................................................... 50 5.2.1.3 Output power tolerance ......................................................................................................................... 50 5.2.2 Transmitter power and frequency control ................................................................................................... 50 5.2.2.1 Transmitter Power Control (ATPC and RTPC) .................................................................................... 50 5.2.2.1.1 ATPC ............................................................................................................................................... 50 5.2.2.1.2 RTPC ............................................................................................................................................... 50 5.2.2.2 Remote Frequency Control (RFC) ........................................................................................................ 51 5.2.3 RF spectrum mask ...................................................................................................................................... 51 5.2.4 Discrete CW components exceeding the spectrum mask limit ................................................................... 51 5.2.5 Unwanted emissions in the spurious domain - external .............................................................................. 51 5.2.6 Dynamic Change of Modulation Order ...................................................................................................... 52 5.2.7 Radio frequency tolerance .......................................................................................................................... 52 5.3 Test methods for the receiver ........................................................................................................................... 52 5.3.0 General test summary ................................................................................................................................. 52 5.3.1 Unwanted emissions in the spurious domain - external .............................................................................. 53 5.3.2 BER as a function of receiver input signal level (RSL) .............................................................................. 53 5.3.3 Receiver selectivity ..................................................................................................................................... 54 5.3.3.1 Void....................................................................................................................................................... 54 5.3.3.2 Co-channel "external", first and second adjacent channel interference sensitivity ............................... 54 5.3.3.2.1 Co-channel and first adjacent channel ............................................................................................. 54 5.3.3.2.2 Second adjacent channel .................................................................................................................. 54 5.3.3.3 CW spurious interference ...................................................................................................................... 54 5.4 Antenna test methods for systems with integral or dedicated antenna ............................................................. 54 5.4.0 General test summary ................................................................................................................................. 54 5.4.1 Radiation Pattern Envelope (Off-axis EIRP density) .................................................................................. 55 5.4.2 Antenna gain ............................................................................................................................................... 55 5.4.3 Antenna Cross-Polar Discrimination (XPD) ............................................................................................... 55 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU ......................................................... 56 Annex B (normative): Frequency bands from 1,4 GHz to 2,6 GHz ................................................ 58 B.1 Introduction ............................................................................................................................................ 58 B.2 General characteristics ........................................................................................................................... 58 B.2.1 Frequency characteristics and channel arrangements ....................................................................................... 58 B.2.2 Transmission capacities .................................................................................................................................... 58 B.3 Transmitter ............................................................................................................................................. 59 B.3.1 General requirements ....................................................................................................................................... 59 B.3.2 RF spectrum masks options .............................................................................................................................. 60 SIST EN 302 217-2 V3.1.1:2017

ETSI ETSI EN 302 217-2 V3.1.1 (2017-05) 5 B.4 Receiver .................................................................................................................................................. 60 B.4.1 General requirements ....................................................................................................................................... 60 B.4.2 BER as a function of receiver input signal level (RSL) ................................................................................... 60 B.4.3 Co-channel "external" and adjacent channels interference sensitivity ............................................................. 61 Annex C (normative): Frequency bands from 3,5 GHz to 11 GHz

(channel separation up to 30 MHz and 56/60 MHz) ............................................................................... 63 C.1 Introduction ............................................................................................................................................ 63 C.2 General characteristics ........................................................................................................................... 63 C.2.1 Frequency characteristics and channel arrangements ....................................................................................... 63 C.2.2 Transmission capacities .................................................................................................................................... 64 C.3 Transmitter ............................................................................................................................................. 65 C.3.1 General requirements ....................................................................................................................................... 65 C.3.2 RF spectrum masks .......................................................................................................................................... 65 C.4 Receiver .................................................................................................................................................. 65 C.4.1 General requirements ....................................................................................................................................... 65 C.4.2 BER as a function of Receiver input Signal Level (RSL) ................................................................................ 65 C.4.3 Co-channel "external" and adjacent channel interference sensitivity ............................................................... 67 Annex D (normative): Frequency bands from 4 GHz to 11 GHz (channel separation 40 MHz) .......................................................................................................... 68 D.1 Introduction ............................................................................................................................................ 68 D.2 General characteristics ........................................................................................................................... 68 D.2.1 Frequency characteristics and channel arrangements ....................................................................................... 68 D.2.2 Transmission capacities .................................................................................................................................... 68 D.3 Transmitter ............................................................................................................................................. 69 D.3.1 General requirements ....................................................................................................................................... 69 D.3.2 RF spectrum masks .......................................................................................................................................... 69 D.4 Receiver .................................................................................................................................................. 70 D.4.1 General requirements ....................................................................................................................................... 70 D.4.2 BER as a function of Receiver input Signal Level (RSL) ................................................................................ 70 D.4.3 Co-channel "external" and adjacent channel interference sensitivity ............................................................... 71 Annex E (normative): Frequency bands 13 GHz, 15 GHz and 18 GHz .......................................... 72 E.1 Introduction ............................................................................................................................................ 72 E.2 General characteristics ........................................................................................................................... 72 E.2.1 Frequency characteristics and channel arrangements ....................................................................................... 72 E.2.2 Transmission capacities .................................................................................................................................... 73 E.3 Transmitter ............................................................................................................................................. 73 E.3.1 General requirements ....................................................................................................................................... 73 E.3.2 RF spectrum masks .......................................................................................................................................... 73 E.4 Receiver .................................................................................................................................................. 74 E.4.1 General requirements ....................................................................................................................................... 74 E.4.2 BER as a function of Receiver input Signal Level (RSL) ................................................................................ 74 E.4.3 Co-channel "external" and adjacent channel interference sensitivity ............................................................... 76 Annex F (normative): Frequency bands from 23 GHz to 42 GHz .................................................. 78 F.1 Introduction ............................................................................................................................................ 78 F.2 General characteristics ........................................................................................................................... 78 F.2.1 Frequency characteristics and channel arrangements ....................................................................................... 78 F.2.2 Transmission capacities .................................................................................................................................... 79 F.3 Transmitter ............................................................................................................................................. 79 SIST EN 302 217-2 V3.1.1:2017

ETSI ETSI EN 302 217-2 V3.1.1 (2017-05) 6 F.3.1 General requirements ....................................................................................................................................... 79 F.3.2 RF spectrum masks .......................................................................................................................................... 80 F.4 Receiver .................................................................................................................................................. 80 F.4.1 General requirements ....................................................................................................................................... 80 F.4.2 BER as a function of Receiver input Signal Level (RSL) ................................................................................ 80 F.4.3 Co-channel "external" and adjacent channel interference sensitivity ............................................................... 83 Annex G (normative): Frequency bands from 50 GHz to 55 GHz .................................................. 84 G.1 Introduction ............................................................................................................................................ 84 G.2 General characteristics ........................................................................................................................... 84 G.2.1 Frequency characteristics and channel arrangements ....................................................................................... 84 G.2.2 Transmission capacities .................................................................................................................................... 85 G.3 Transmitter ............................................................................................................................................. 85 G.3.1 General requirements ....................................................................................................................................... 85 G.3.2 RF spectrum masks .......................................................................................................................................... 85 G.4 Receiver .................................................................................................................................................. 85 G.4.1 General requirements ................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.