SIST EN 301 908-18 V11.1.2:2017
(Main)The present document applies to the following equipment types:
1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE).
The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base
Stations for 3GPP™ Release 9, 10 and 11. This includes the requirements for E UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - 18. del: Multi-Standard Radio (E-UTRA, UTRA in GSM/EDGE) bazne postaje (BS)
Ta dokument se uporablja za opremo naslednjih vrst:
1) Bazne postaje, ki podpirajo Multi-Standard Radio (E-UTRA, UTRA, GSM/EDGE).
Ta dokument zajema zahteve za bazne postaje E-UTRA, UTRA in GSM/EDGE MSR z multi tehnologijo radijskega dostopa za izdaje 9, 10 in 11 standarda 3GPP™. To vključuje zahteve za pasove bazne postaje E-UTRA in pasove bazne postaje E-UTRA CA iz izdaje 12 standarda 3GPP.
Ta dokument zajema bistvene zahteve člena 3.2 direktive 2014/53/EU [i.1] pod pogoji iz dodatka A.
General Information
Standards Content (sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU - Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-18 V11.1.2 (2017-04)SIST EN 301 908-18 V11.1.2:2017en01-junij-2017SIST EN 301 908-18 V11.1.2:2017SLOVENSKI
STANDARDSIST EN 301 908-18 V11.1.2:2017
ETSI EN 301 908-18 V11.1.2 (2017-04) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)
HARMONISED EUROPEAN STANDARD SIST EN 301 908-18 V11.1.2:2017ETSI ETSI EN 301 908-18 V11.1.2 (2017-04) 2
Reference REN/MSG-TFES-11-18-RED-C1 Keywords 3G, 3GPP, cellular, digital, EDGE, E-UTRA, GSM, IMT, IMT-2000, IMT-Advanced, LTE, mobile, MSR, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-18 V11.1.2:2017
ETSI ETSI EN 301 908-18 V11.1.2 (2017-04) 3 Contents Intellectual Property Rights ................................................................................................................................ 6 Foreword ............................................................................................................................................................. 6 Modal verbs terminology .................................................................................................................................... 6 Introduction ........................................................................................................................................................ 6 1 Scope ........................................................................................................................................................ 7 2 References ................................................................................................................................................ 8 2.1 Normative references ......................................................................................................................................... 8 2.2 Informative references ........................................................................................................................................ 9 3 Definitions, symbols and abbreviations ................................................................................................... 9 3.1 Definitions .......................................................................................................................................................... 9 3.2 Symbols ............................................................................................................................................................ 12 3.3 Abbreviations ................................................................................................................................................... 12 4 Technical requirements specifications ................................................................................................... 14 4.1 Environmental profile ....................................................................................................................................... 14 4.2 Conformance requirements .............................................................................................................................. 14 4.2.1 Introduction................................................................................................................................................. 14 4.2.2 Operating band unwanted emissions .......................................................................................................... 17 4.2.2.1 Definition .............................................................................................................................................. 17 4.2.2.2 Limits .................................................................................................................................................... 17 4.2.2.2.1 Limits for Band Categories 1 and 3 ................................................................................................. 17 4.2.2.2.2 Limits for Band Category 2 ............................................................................................................. 22 4.2.2.2.3 Limits for GSM/EDGE single-RAT operation ................................................................................ 27 4.2.2.2.4 Limits for protection of DTT ........................................................................................................... 28 4.2.2.2.5 Limits for co-existence with services in adjacent frequency bands ................................................. 28 4.2.2.2.6 Limits for operation in Band 32 ...................................................................................................... 28 4.2.2.3 Conformance ......................................................................................................................................... 29 4.2.3 Adjacent Channel Leakage power Ratio (ACLR) ...................................................................................... 29 4.2.3.1 Definition .............................................................................................................................................. 29 4.2.3.2 Limits .................................................................................................................................................... 29 4.2.3.2.1 E-UTRA limits ................................................................................................................................ 29 4.2.3.2.2 UTRA FDD limits ........................................................................................................................... 29 4.2.3.2.3 UTRA TDD limits ........................................................................................................................... 30 4.2.3.2.4 Cumulative ACLR requirement in non-contiguous spectrum ......................................................... 30 4.2.3.3 Conformance ......................................................................................................................................... 31 4.2.4 Transmitter spurious emissions ................................................................................................................... 31 4.2.4.1 Definition .............................................................................................................................................. 31 4.2.4.2 Limits .................................................................................................................................................... 32 4.2.4.2.1 Spurious emissions .......................................................................................................................... 32 4.2.4.2.2 Additional spurious emissions requirement for BC2 ....................................................................... 32 4.2.4.2.3 Co-existence with other systems ..................................................................................................... 32 4.2.4.2.4 Protection of the BS receiver of own or different BS ...................................................................... 34 4.2.4.3 Conformance ......................................................................................................................................... 34 4.2.5 Base station maximum output power .......................................................................................................... 34 4.2.5.1 Definition .............................................................................................................................................. 34 4.2.5.2 Limits .................................................................................................................................................... 35 4.2.5.3 Conformance ......................................................................................................................................... 35 4.2.6 Transmit intermodulation ........................................................................................................................... 35 4.2.6.1 Definition .............................................................................................................................................. 35 4.2.6.2 Limits .................................................................................................................................................... 35 4.2.6.2.1 General limits .................................................................................................................................. 35 4.2.6.2.2 Additional limits (BC1 and BC2) .................................................................................................... 36 4.2.6.2.3 Additional limits (BC3) ................................................................................................................... 36 4.2.6.3 Conformance ......................................................................................................................................... 37 4.2.7 Receiver spurious emissions ....................................................................................................................... 37 SIST EN 301 908-18 V11.1.2:2017
ETSI ETSI EN 301 908-18 V11.1.2 (2017-04) 4 4.2.7.1 Definition .............................................................................................................................................. 37 4.2.7.2 Limits .................................................................................................................................................... 37 4.2.7.2.1 General limits .................................................................................................................................. 37 4.2.7.2.2 Additional limits for BC2 ................................................................................................................ 38 4.2.7.3 Conformance ......................................................................................................................................... 38 4.2.8 In-band blocking ......................................................................................................................................... 38 4.2.8.1 Definition .............................................................................................................................................. 38 4.2.8.2 Limits .................................................................................................................................................... 38 4.2.8.2.1 General limits .................................................................................................................................. 38 4.2.8.2.2 Additional BC3 blocking limits ....................................................................................................... 40 4.2.8.3 Conformance ......................................................................................................................................... 40 4.2.9 Out-of-band blocking .................................................................................................................................. 40 4.2.9.1 Definition .............................................................................................................................................. 40 4.2.9.2 Limits .................................................................................................................................................... 40 4.2.9.3 Conformance ......................................................................................................................................... 41 4.2.10 Receiver intermodulation characteristics .................................................................................................... 41 4.2.10.1 Definition .............................................................................................................................................. 41 4.2.10.2 Limits .................................................................................................................................................... 41 4.2.10.2.1 General intermodulation limits ........................................................................................................ 41 4.2.10.2.2 General narrowband intermodulation limits .................................................................................... 42 4.2.10.2.3 Additional narrowband intermodulation limits for GSM/EDGE ..................................................... 44 4.2.10.3 Conformance ......................................................................................................................................... 44 4.2.11 Narrowband blocking ................................................................................................................................. 44 4.2.11.1 Definition .............................................................................................................................................. 44 4.2.11.2 Limits .................................................................................................................................................... 44 4.2.11.2.1 General limits .................................................................................................................................. 44 4.2.11.2.2 Additional limits for GSM/EDGE ................................................................................................... 45 4.2.11.2.3 GSM/EDGE limits for AM suppression .......................................................................................... 45 4.2.11.3 Conformance ......................................................................................................................................... 45 4.2.12 Reference sensitivity level .......................................................................................................................... 45 4.2.12.1 Definition .............................................................................................................................................. 45 4.2.12.2 Limits .................................................................................................................................................... 45 4.2.12.3 Conformance ......................................................................................................................................... 46 5 Testing for compliance with technical requirements .............................................................................. 46 5.1 Environmental conditions for testing ............................................................................................................... 46 5.2 Interpretation of the measurement results ........................................................................................................ 46 5.3 Essential radio test suites .................................................................................................................................. 48 5.3.0 Introduction................................................................................................................................................. 48 5.3.1 Operating band unwanted emissions .......................................................................................................... 48 5.3.1.0 General .................................................................................................................................................. 48 5.3.1.1 Initial conditions ................................................................................................................................... 48 5.3.1.2 Procedure .............................................................................................................................................. 49 5.3.1.3 Test requirement ................................................................................................................................... 49 5.3.2 Adjacent Channel Leakage power Ratio (ACLR) ...................................................................................... 49 5.3.2.0 General .................................................................................................................................................. 49 5.3.2.1 Initial conditions ................................................................................................................................... 49 5.3.2.2 Procedure .............................................................................................................................................. 50 5.3.2.3 Test requirement ................................................................................................................................... 50 5.3.3 Transmitter spurious emissions ................................................................................................................... 50 5.3.3.1 Initial conditions ................................................................................................................................... 50 5.3.3.2 Procedure .............................................................................................................................................. 50 5.3.3.3 Test requirement ................................................................................................................................... 51 5.3.4 Base station maximum output power .......................................................................................................... 51 5.3.4.1 Initial conditions ................................................................................................................................... 51 5.3.4.2 Procedure .............................................................................................................................................. 51 5.3.4.3 Test requirement ................................................................................................................................... 51 5.3.5 Transmit intermodulation ........................................................................................................................... 51 5.3.5.0 General .................................................................................................................................................. 51 5.3.5.1 Initial conditions ................................................................................................................................... 52 5.3.5.2 Procedure .............................................................................................................................................. 52 5.3.5.2.1 General minimum requirement test procedure ................................................................................ 52 SIST EN 301 908-18 V11.1.2:2017
ETSI ETSI EN 301 908-18 V11.1.2 (2017-04) 5 5.3.5.2.2 Additional minimum requirement (BC1 and BC2) test procedure .................................................. 53 5.3.5.2.3 Additional minimum requirement (BC3) test procedure ................................................................. 54 5.3.5.3 Test requirement ................................................................................................................................... 54 5.3.6 Receiver spurious emissions ....................................................................................................................... 54 5.3.6.1 Initial conditions ................................................................................................................................... 54 5.3.6.2 Procedure .............................................................................................................................................. 55 5.3.6.3 Test requirement ................................................................................................................................... 55 5.3.7 In-band blocking ......................................................................................................................................... 55 5.3.7.1 Initial conditions ................................................................................................................................... 55 5.3.7.2 Procedure .............................................................................................................................................. 55 5.3.7.2.1 Procedure for general blocking ........................................................................................................ 55 5.3.7.2.2 Procedure for additional BC3 blocking requirement ....................................................................... 56 5.3.7.3 Test requirement ................................................................................................................................... 56 5.3.8 Out-of-band blocking .................................................................................................................................. 56 5.3.8.1 Initial conditions ................................................................................................................................... 56 5.3.8.2 Procedure .............................................................................................................................................. 57 5.3.8.3 Test requirement ................................................................................................................................... 57 5.3.9 Receiver intermodulation characteristics .................................................................................................... 57 5.3.9.1 Initial conditions ................................................................................................................................... 57 5.3.9.2 Procedure .............................................................................................................................................. 58 5.3.9.2.1 Procedure for general and narrowband intermodulation ................................................................. 58 5.3.9.2.2 Procedure for additional narrowband intermodulation for GSM/EDGE ......................................... 58 5.3.9.3 Test requirement ................................................................................................................................... 58 5.3.10 Narrowband blocking ................................................................................................................................. 58 5.3.10.1 Initial conditions ................................................................................................................................... 58 5.3.10.2 Procedure .............................................................................................................................................. 59 5.3.10.2.1 Procedure for narrowband blocking ................................................................................................ 59 5.3.10.2.2 Procedure for additional narrowband blocking for GSM/EDGE ..................................................... 59 5.3.10.2.3 Procedure for GSM/EDGE AM suppression ................................................................................... 59 5.3.10.3 Test requirement ................................................................................................................................... 59 5.3.11 Reference sensitivity level .......................................................................................................................... 60 5.3.11.1 General .................................................................................................................................................. 60 5.3.11.2 Test requirement ................................................................................................................................... 60 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU ......................................................... 61 Annex B (normative): Base Station configurations ........................................................................... 62 B.1 Reception with multiple receiver antenna connectors and receiver diversity ........................................ 62 B.2 Duplexers ............................................................................................................................................... 62 B.3 Power supply options ............................................................................................................................. 62 B.4 Ancillary RF amplifiers .......................................................................................................................... 62 B.5 BS using antenna arrays ......................................................................................................................... 63 B.5.0 General ............................................................................................................................................................. 63 B.5.1 Receiver tests .................................................................................................................................................... 63 B.5.2 Transmitter tests ............................................................................................................................................... 64 B.6 Transmission with multiple transmitter antenna connectors .................................................................. 64 B.7 BS with integrated Iuant BS modem ...................................................................................................... 64 Annex C (informative): Environmental profile specification ............................................................. 65 Annex D (informative): Bibliography ................................................................................................... 66 Annex E (informative): Change history ............................................................................................... 67 History .............................................................................................................................................................. 68
SIST EN 301 908-18 V11.1.2:2017ETSI ETSI EN 301 908-18 V11.1.2 (2017-04) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.