M/453 -

RTS/ITS-00190

RTS/ITS-00189

RTS/ITS-00193

RTS/ITS-00192

The present document specifies the media-independent functionality of the GeoNetworking protocol.

RTR/ITS-189

REN/ITS-00358

The present document defines the two lowest layers, physical layer and the data link layer, grouped into the access layer of the ITS station reference architecture ETSI EN 302 665 [i.4].

REN/ITS-0040191

REN/MSG-TFES-13-3

The present document specifies technical characteristics and methods of measurements for the equipment:
• Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
- This radio equipment type is capable of operating in all or any part of the frequency bands given in
table 1-1.
The present document covers conducted requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8,
9, 10, 11, 12 and 13. Additionally, it includes the requirements for BS operating bands from 3GPP Release 14.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.2] is given in annex A.

The present document provides the specification of the Services Announcement (SA) service, including its protocol
functions, based on ISO/TS 16460 [1].
The definition of the interface between Service Provider and Service Announcer ITS stations (ITS-S) as well as of the
communication steps following the service announcement protocol procedure and related protocol details between
Service Announcer and Service User ITS-S are application-specific and are not covered by the present document.

REN/ITS-002180

The present document specifies the Basic Transport Protocol (BTP) for the transport of packets among ITS stations. It
resides on top of the GeoNetworking protocol specified in ETSI EN 302 636-4-1 [5] and below the ITS-S facilities
layer. It provides an end-to-end, connection-less and unreliable transport service.

REN/ITS-00360

The present document provides specification of the DEN basic service, which is in support of the RHW application.
More specifically, the present document specifies the syntax and semantics of the "Decentralized Environmental
Notification Message" (DENM) and the DENM protocol handling.
The DEN basic service may be implemented in an vehicle ITS-S, a road side ITS-S, a personal ITS-S or a central
ITS-S.

The present document provides the specifications of the Cooperative Awareness basic service (CA basic service), which
is in support of the BSA road safety application.
This includes definition of the syntax and semantics of the Cooperative Awareness Message (CAM) and detailed
specifications on the message handling.

REN/ITS-0010090

REN/ITS-0010089

DTS/ITS-004182

DTR/ITS-46

RTS/ITS-00524

RTS/ITS-00430

REN/ITS-00349

REN/ITS-00356

REN/ITS-00349

The present document specifies the Basic Transport Protocol (BTP) for the transport of packets among ITS stations. It
resides on top of the GeoNetworking protocol specified in ETSI EN 302 636-4-1 [5] and ETSI TS 102 636-4-2 [i.2] and
below the ITS-S facilities layer. It provides an end-to-end, connection-less and unreliable transport service.

RTS/ITS-00173

RTS/ITS-00170

RTS/ITS-00532

DTS/ITS-0050008

DTS/ITS-00136

The present document specifies a network architecture of communications in Intelligent Transportation Systems
(ITSC). The network architecture is focused on, but not limited to, vehicular communication. The architecture enables a
wide range of ITS applications for road safety, traffic efficiency as well as for infotainment and business.
The present document defines the framework for network and data transport protocols that provide data exchange
among ITS stations. A particular aspect is the GeoNetworking protocol that provides ad hoc and multi-hop
communication over short-range wireless technologies utilizing geographical positions.

RTS/ITS-00154

RTS/ITS-00153

RTS/ITS-00159

RTS/ITS-00158

RTS/ITS-00155

RTS/ITS-00438

The present document provides specification of the DEN basic service, which is in support of the RHW application.
More specifically, the present document specifies the syntax and semantics of the "Decentralized Environmental
Notification Message" (DENM) and the DENM protocol handling.
The DEN basic service may be implemented in an vehicle ITS-S, a road side ITS-S, a personal ITS-S or a central
ITS-S.

The present document provides the specifications of the Cooperative Awareness basic service (CA basic service), which
is in support of the BSA road safety application.
This includes definition of the syntax and semantics of the Cooperative Awareness Message (CAM) and detailed
specifications on the message handling.

REN/ITS-0030034

REN/ITS-0010020

REN/ITS-0010019

The present document defines functional behaviour associated with a Local Dynamic Map (LDM) for usage in an ITS station unit (ITS-SU). It specifies functions and interfaces supported by a LDM. These functions and interfaces provide secure access to the LDM to manage LDM data objects stored in a LDM. It defines LDM data objects for safety-related and Vehicle to Vehicle (V2V)-related applications.

DEN/ITS-0010005

RTS/ITS-00148

The present document specifies the Basic Transport Protocol (BTP) for the transport of packets among ITS stations. It resides on top of the GeoNetworking protocol specified in ETSI EN 302 636-4-1 [5] and ETSI TS 102 636-4-2 [i.2] and below the ITS-S facilities layer. It provides an end-to-end, connection-less and unreliable transport service.

The present document specifies the media-independent functionality of the GeoNetworking protocol.

REN/ITS-0030036